Generated by kicad-footprint-generator · KiCad file format 20260206
REF35180QDBVRQ1
TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-6
REF35180QDBVRQ1 from TEXAS INSTRUMENTS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground connection; the datasheet lists two GND pins (1 and 2) that both connect to device ground. |
| 2 | GND | power_in | Device ground connection; this is the second of two ground pins (with pin 1) on the 6-pin DBV package. |
| 3 | EN | input | Enable connection that enables or disables the device; the enable voltage range is 0 V to VIN. |
| 4 | VIN | power_in | Power input supply voltage connection; input voltage must be between VREF + VDO and 6 V. |
| 5 | NR | output | Noise reduction pin; connect an optional capacitor between NR and ground to reduce output noise. |
| 6 | VREF | power_in | Reference voltage output of the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Package | SOT-23-6 |
| Category | Global Sourcing Parts |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | -0.05 | 0.05 | % | TA = 25℃ | 5 | ||
| Output voltage temperature coefficient | 15 | ppm/℃ | -40℃ ≤ TA ≤ 125℃ | 5 | |||
| Line regulation | ΔVREF/ΔVIN | 40 | 160 | ppm/V | VREF < 2.5 V; VIN = VREF + VDO to VINMAX | 5 | |
| Load regulation sourcing | ΔVREF/ΔIL | 20 | 60 | ppm/mA | IL = 0 mA to 10 mA, VIN = VREF + VDO; Source | 5 | |
| Load regulation sinking | ΔVREF/ΔIL | 40 | 350 | ppm/mA | IL = 0 mA to 5 mA, VIN = VREF + VDO; Sink | 5 | |
| Input voltage | VIN | 6 | V | 5 | |||
| Quiescent current, active mode | IQ | 0.65 | 0.9 | µA | Active mode, TA = 25℃ | 5 | |
| Quiescent current, active mode | IQ | 2.6 | µA | Active mode, -40℃ ≤ TA ≤ 125℃ | 5 | ||
| Quiescent current, shutdown mode | IQ | 0.5 | µA | Shutdown mode, -40℃ ≤ TA ≤ 125℃ | 5 | ||
| Enable pin current | IEN | 0.05 | 0.1 | uA | VEN = VIN | 5 | |
| Dropout voltage | VDO | 120 | mV | IL = 5 mA | 5 | ||
| Dropout voltage | VDO | 250 | mV | IL = 10 mA | 5 | ||
| Enable voltage (recommended) | EN | 0 | V | 4 | |||
| Output current | IL | -5 | 10 | mA | 4 | ||
| Operating temperature | TA | -40 | 25 | 125 | °C | 4 | |
| Input voltage | VIN | -0.3 | 6.5 | V | 4 | ||
| Enable voltage | EN | -0.3 | V | 4 | |||
| Output voltage | VREF | -0.3 | V | 4 | |||
| Output short circuit current | ISC | 20 | mA | 4 | |||
| Operating temperature range | TA | -55 | 125 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 170 | °C | 4 | ||
| Shutdown mode quiescent current | IQ | 0.1 | µA | Shutdown mode, TA = 25℃ | 5 | ||
| Short circuit current, sourcing | ISC | 33 | mA | VREF = 0 V, TA = 25℃ | 5 | ||
| Short circuit current, sinking | ISC | 21 | mA | VREF = VIN V, TA = 25℃ | 5 | ||
| Turn-on time | tON | 2 | ms | 0.1% settling, CL = 1 µF, VREF = 2.5 V | 5 | ||
| Output voltage noise | en | 0.7 | ppmrms | f = 10 Hz to 1 kHz, CL = 1 µF | 5 | ||
| Low-frequency noise | enp-p | 3.3 | ppmp-p | f = 0.1 Hz to 10 Hz, VREF < 2.5 V | 5 | ||
| Long-term stability | 30 | ppm | 0 to 1000h at 35°C | 5 | |||
| Output voltage hysteresis (cycle 1) | 90 | ppm | 25°C, -40°C, 125°C, 25°C (cycle 1) | 5 | |||
| Output voltage hysteresis (cycle 2) | 70 | ppm | 25°C, -40°C, 125°C, 25°C (cycle 2) | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 164.4 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 102.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 59.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ΨJT | 44 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ΨJB | 59.4 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
REF35180QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ref35180qdbvrq1-etched.step/ref35180qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref35180qdbvrq1.step/ref35180qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TEXAS INSTRUMENTS datasheet (32 pp, sha256
d455f36e5976fa98, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).