Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF35180QDBVRQ1

TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-6

REF35180QDBVRQ1 from TEXAS INSTRUMENTS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Device ground connection; the datasheet lists two GND pins (1 and 2) that both connect to device ground.
2 GND power_in Device ground connection; this is the second of two ground pins (with pin 1) on the 6-pin DBV package.
3 EN input Enable connection that enables or disables the device; the enable voltage range is 0 V to VIN.
4 VIN power_in Power input supply voltage connection; input voltage must be between VREF + VDO and 6 V.
5 NR output Noise reduction pin; connect an optional capacitor between NR and ground to reduce output noise.
6 VREF power_in Reference voltage output of the device.

Key specifications

Parameter Value
Manufacturer TEXAS INSTRUMENTS
Package SOT-23-6
Category Global Sourcing Parts
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy -0.05 0.05 % TA = 25℃ 5
Output voltage temperature coefficient 15 ppm/℃ -40℃ ≤ TA ≤ 125℃ 5
Line regulation ΔVREF/ΔVIN 40 160 ppm/V VREF < 2.5 V; VIN = VREF + VDO to VINMAX 5
Load regulation sourcing ΔVREF/ΔIL 20 60 ppm/mA IL = 0 mA to 10 mA, VIN = VREF + VDO; Source 5
Load regulation sinking ΔVREF/ΔIL 40 350 ppm/mA IL = 0 mA to 5 mA, VIN = VREF + VDO; Sink 5
Input voltage VIN 6 V 5
Quiescent current, active mode IQ 0.65 0.9 µA Active mode, TA = 25℃ 5
Quiescent current, active mode IQ 2.6 µA Active mode, -40℃ ≤ TA ≤ 125℃ 5
Quiescent current, shutdown mode IQ 0.5 µA Shutdown mode, -40℃ ≤ TA ≤ 125℃ 5
Enable pin current IEN 0.05 0.1 uA VEN = VIN 5
Dropout voltage VDO 120 mV IL = 5 mA 5
Dropout voltage VDO 250 mV IL = 10 mA 5
Enable voltage (recommended) EN 0 V 4
Output current IL -5 10 mA 4
Operating temperature TA -40 25 125 °C 4
Input voltage VIN -0.3 6.5 V 4
Enable voltage EN -0.3 V 4
Output voltage VREF -0.3 V 4
Output short circuit current ISC 20 mA 4
Operating temperature range TA -55 125 °C 4
Storage temperature range Tstg -65 170 °C 4
Shutdown mode quiescent current IQ 0.1 µA Shutdown mode, TA = 25℃ 5
Short circuit current, sourcing ISC 33 mA VREF = 0 V, TA = 25℃ 5
Short circuit current, sinking ISC 21 mA VREF = VIN V, TA = 25℃ 5
Turn-on time tON 2 ms 0.1% settling, CL = 1 µF, VREF = 2.5 V 5
Output voltage noise en 0.7 ppmrms f = 10 Hz to 1 kHz, CL = 1 µF 5
Low-frequency noise enp-p 3.3 ppmp-p f = 0.1 Hz to 10 Hz, VREF < 2.5 V 5
Long-term stability 30 ppm 0 to 1000h at 35°C 5
Output voltage hysteresis (cycle 1) 90 ppm 25°C, -40°C, 125°C, 25°C (cycle 1) 5
Output voltage hysteresis (cycle 2) 70 ppm 25°C, -40°C, 125°C, 25°C (cycle 2) 5
Junction-to-ambient thermal resistance RθJA 164.4 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 102.5 °C/W 4
Junction-to-board thermal resistance RθJB 59.6 °C/W 4
Junction-to-top characterization parameter ΨJT 44 °C/W 4
Junction-to-board characterization parameter ΨJB 59.4 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: REF35180QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ref35180qdbvrq1-etched.step / ref35180qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref35180qdbvrq1.step / ref35180qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TEXAS INSTRUMENTS datasheet (32 pp, sha256 d455f36e5976fa98, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF