main
History Download
Ray ref3450idbvr: specified limits as data (metadata.characteristics, 40 rows from the datasheet) c08333c

REF3450IDBVR

Texas Instruments · Voltage Reference · SOT-23-6

REF3450IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND_F power_in Ground force connection. Kelvin-sense ground return that carries the device bias/load current back to the supply return.
2 GND_S power_in Ground sense connection. High-impedance Kelvin-sense input used by the reference to regulate VOUT with respect to the load ground, eliminating IR drop on the GND_F trace.
3 EN input Enable connection. Drive high to enable the reference, low to disable it and place the device in shutdown. Must not be left floating.
4 IN power_in Input supply voltage connection. Operating input range up to 12V; bypass with a 1µF CIN capacitor close to the pin.
5 OUT_S input Reference voltage output sense connection. High-impedance Kelvin-sense feedback input; tie to the load-side of OUT_F at the point where accurate regulation is required.
6 OUT_F power_out Reference voltage output force connection. Delivers the regulated 5.0V (REF3450) reference with ±10mA drive; bypass with a 10µF COUT capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • REF3450IDBVR
  • REF3450IDBVT
  • REF3450IDBVRTIDBVR
  • REF3450IDBVRTIDBVT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (TA = 25°C) -0.05 0.05 % TA = 25°C 7
Output voltage temperature coefficient 2.5 6 ppm/°C -40°C ≤ TA ≤ 125°C 7
Line regulation ΔVO/ΔVIN 2 15 ppm/V VIN = VOUT + VDO to 12 V 7
Load regulation sourcing ΔVO/ΔIL 20 30 ppm/mA IL = 0 mA to 10 mA, VIN = VOUT + VDO 7
Load regulation sinking (REF3450) ΔVO/ΔIL 70 140 ppm/mA IL = 0 mA to -10 mA, VIN = VOUT + VDO, TA = 25°C 7
Short circuit current ISC 18 22 mA VOUT = 0 V at TA = 25°C 7
Stable output capacitor range CL 0.1 10 µF -40°C ≤ TA ≤ 125°C 7
Output current capacity IL -10 10 mA VIN = VOUT + VDO to 12 V 7
Input voltage VIN 12 V min = VOUT + VDO (expression, not a number) 7
Quiescent current, active mode IQ 72 95 µA Active mode 8
Quiescent current, shutdown mode IQ 2.5 3 µA Shutdown mode 8
ENABLE pin voltage, active mode VEN 1.6 V Voltage reference in active mode (EN = 1) 8
ENABLE pin voltage, shutdown mode VEN 0.5 V Voltage reference in shutdown mode (EN = 0) 8
Dropout voltage VDO 50 100 mV IL = 0 mA 8
Dropout voltage VDO 500 mV IL = 10 mA 8
ENABLE pin leakage current IEN 1 2 µA VEN = VIN = 12 V 8
Long-term stability 25 ppm DBV package, 0 to 1000 h at 35°C 7
Long-term stability 10 ppm DBV package, 1000 h to 2000 h at 35°C 7
Output voltage thermal hysteresis 30 ppm DBV package, 25°C, -40°C, 125°C, 25°C Cycle 1 7
Output voltage thermal hysteresis 10 ppm DBV package, 25°C, -40°C, 125°C, 25°C Cycle 2 7
Low frequency noise (REF3450) enp-p 3.8 µVp-p/V 0.1 Hz ≤ f ≤ 10 Hz (REF3440 and REF3450) 7
Integrated wide band noise en 24 µVrms 10 Hz ≤ f ≤ 10 kHz 7
Output voltage noise density (REF3450) en 0.2 ppm/√Hz f = 1 kHz (REF3440 and REF3450) 7
Turn-on time tON 2.5 ms 0.1% of output voltage settling, CL = 10 µF 7
Output voltage (REF3450) VOUT 5 V REF3450, REF3450T 7
Input voltage (absolute maximum) IN -0.3 13 V 6
Enable input voltage (absolute maximum) EN -0.3 V max = IN + 0.3 V (expression, not a number) 6
Output voltage (absolute maximum) VOUT -0.3 5.5 V 6
Output short circuit current (absolute maximum) ISC 20 mA 6
Operating temperature range (absolute maximum) TA -55 150 °C 6
Storage temperature range Tstg -65 170 °C 6
Input voltage (recommended) IN 12 V min = VOUT + VDO (expression, not a number) 6
Enable voltage (recommended) EN 0 V max = IN (expression, not a number) 6
Output current (recommended) IL -10 10 mA 6
Operating temperature (recommended) TA -40 25 125 °C 6
Junction-to-ambient thermal resistance RθJA 122.6 °C/W DBV (6-pin) 6
Junction-to-case (top) thermal resistance RθJC(top) 80.2 °C/W DBV (6-pin) 6
Junction-to-board thermal resistance RθJB 42 °C/W DBV (6-pin) 6
Junction-to-top characterization parameter ΨJT 23.2 °C/W DBV (6-pin) 6
Junction-to-board characterization parameter ΨJB 41.9 °C/W DBV (6-pin) 6

CAD (KiCad official)

  • Symbol: REF3450IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ref3450idbvr-etched.step / ref3450idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref3450idbvr.step / ref3450idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 4daf8dbbd5b7be4c, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF