Generated by kicad-footprint-generator · KiCad file format 20260206
REF3450IDBVR
Texas Instruments · Voltage Reference · SOT-23-6
REF3450IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND_F | power_in | Ground force connection. Kelvin-sense ground return that carries the device bias/load current back to the supply return. |
| 2 | GND_S | power_in | Ground sense connection. High-impedance Kelvin-sense input used by the reference to regulate VOUT with respect to the load ground, eliminating IR drop on the GND_F trace. |
| 3 | EN | input | Enable connection. Drive high to enable the reference, low to disable it and place the device in shutdown. Must not be left floating. |
| 4 | IN | power_in | Input supply voltage connection. Operating input range up to 12V; bypass with a 1µF CIN capacitor close to the pin. |
| 5 | OUT_S | input | Reference voltage output sense connection. High-impedance Kelvin-sense feedback input; tie to the load-side of OUT_F at the point where accurate regulation is required. |
| 6 | OUT_F | power_out | Reference voltage output force connection. Delivers the regulated 5.0V (REF3450) reference with ±10mA drive; bypass with a 10µF COUT capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
REF3450IDBVRREF3450IDBVTREF3450IDBVRTIDBVRREF3450IDBVRTIDBVT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (TA = 25°C) | -0.05 | 0.05 | % | TA = 25°C | 7 | ||
| Output voltage temperature coefficient | 2.5 | 6 | ppm/°C | -40°C ≤ TA ≤ 125°C | 7 | ||
| Line regulation | ΔVO/ΔVIN | 2 | 15 | ppm/V | VIN = VOUT + VDO to 12 V | 7 | |
| Load regulation sourcing | ΔVO/ΔIL | 20 | 30 | ppm/mA | IL = 0 mA to 10 mA, VIN = VOUT + VDO | 7 | |
| Load regulation sinking (REF3450) | ΔVO/ΔIL | 70 | 140 | ppm/mA | IL = 0 mA to -10 mA, VIN = VOUT + VDO, TA = 25°C | 7 | |
| Short circuit current | ISC | 18 | 22 | mA | VOUT = 0 V at TA = 25°C | 7 | |
| Stable output capacitor range | CL | 0.1 | 10 | µF | -40°C ≤ TA ≤ 125°C | 7 | |
| Output current capacity | IL | -10 | 10 | mA | VIN = VOUT + VDO to 12 V | 7 | |
| Input voltage | VIN | 12 | V | min = VOUT + VDO (expression, not a number) | 7 | ||
| Quiescent current, active mode | IQ | 72 | 95 | µA | Active mode | 8 | |
| Quiescent current, shutdown mode | IQ | 2.5 | 3 | µA | Shutdown mode | 8 | |
| ENABLE pin voltage, active mode | VEN | 1.6 | V | Voltage reference in active mode (EN = 1) | 8 | ||
| ENABLE pin voltage, shutdown mode | VEN | 0.5 | V | Voltage reference in shutdown mode (EN = 0) | 8 | ||
| Dropout voltage | VDO | 50 | 100 | mV | IL = 0 mA | 8 | |
| Dropout voltage | VDO | 500 | mV | IL = 10 mA | 8 | ||
| ENABLE pin leakage current | IEN | 1 | 2 | µA | VEN = VIN = 12 V | 8 | |
| Long-term stability | 25 | ppm | DBV package, 0 to 1000 h at 35°C | 7 | |||
| Long-term stability | 10 | ppm | DBV package, 1000 h to 2000 h at 35°C | 7 | |||
| Output voltage thermal hysteresis | 30 | ppm | DBV package, 25°C, -40°C, 125°C, 25°C Cycle 1 | 7 | |||
| Output voltage thermal hysteresis | 10 | ppm | DBV package, 25°C, -40°C, 125°C, 25°C Cycle 2 | 7 | |||
| Low frequency noise (REF3450) | enp-p | 3.8 | µVp-p/V | 0.1 Hz ≤ f ≤ 10 Hz (REF3440 and REF3450) | 7 | ||
| Integrated wide band noise | en | 24 | µVrms | 10 Hz ≤ f ≤ 10 kHz | 7 | ||
| Output voltage noise density (REF3450) | en | 0.2 | ppm/√Hz | f = 1 kHz (REF3440 and REF3450) | 7 | ||
| Turn-on time | tON | 2.5 | ms | 0.1% of output voltage settling, CL = 10 µF | 7 | ||
| Output voltage (REF3450) | VOUT | 5 | V | REF3450, REF3450T | 7 | ||
| Input voltage (absolute maximum) | IN | -0.3 | 13 | V | 6 | ||
| Enable input voltage (absolute maximum) | EN | -0.3 | V | max = IN + 0.3 V (expression, not a number) | 6 | ||
| Output voltage (absolute maximum) | VOUT | -0.3 | 5.5 | V | 6 | ||
| Output short circuit current (absolute maximum) | ISC | 20 | mA | 6 | |||
| Operating temperature range (absolute maximum) | TA | -55 | 150 | °C | 6 | ||
| Storage temperature range | Tstg | -65 | 170 | °C | 6 | ||
| Input voltage (recommended) | IN | 12 | V | min = VOUT + VDO (expression, not a number) | 6 | ||
| Enable voltage (recommended) | EN | 0 | V | max = IN (expression, not a number) | 6 | ||
| Output current (recommended) | IL | -10 | 10 | mA | 6 | ||
| Operating temperature (recommended) | TA | -40 | 25 | 125 | °C | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 122.6 | °C/W | DBV (6-pin) | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 80.2 | °C/W | DBV (6-pin) | 6 | ||
| Junction-to-board thermal resistance | RθJB | 42 | °C/W | DBV (6-pin) | 6 | ||
| Junction-to-top characterization parameter | ΨJT | 23.2 | °C/W | DBV (6-pin) | 6 | ||
| Junction-to-board characterization parameter | ΨJB | 41.9 | °C/W | DBV (6-pin) | 6 |
CAD (KiCad official)
- Symbol:
REF3450IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ref3450idbvr-etched.step/ref3450idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref3450idbvr.step/ref3450idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
4daf8dbbd5b7be4c, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).