main
Ray
Publish 0.1.0
85e9f1a
REF2041QDDCRQ1
Texas Instruments · Voltage References · SOT-23-5
REF2041QDDCRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBIAS | output | Bias voltage output equal to VREF / 2, rated for ±20 mA output current with a 50 mA short-circuit current limit. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Enable input; the device is enabled when EN ≥ VIN - 0.7 V, and shutdown mode is entered when EN is 0 to 0.7 V. |
| 4 | VIN | power_in | Input supply voltage with a recommended range of VREF + 0.02 V to 5.5 V and an absolute maximum of 6 V. |
| 5 | VREF | power_in | Reference voltage output (VREF), rated for ±20 mA output current with a 50 mA short-circuit current limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | -0.05 | 0.05 | % | 6 | |||
| Output voltage temperature coefficient | -8 | 3 | 8 | ppm/°C | -40°C ≤ TA ≤ 125°C | 6 | |
| VREF and VBIAS tracking over temperature | -7 | 2 | 7 | ppm/°C | -40°C ≤ TA ≤ 125°C | 6 | |
| Line regulation | ΔVO(ΔVI) | 3 | 35 | ppm/V | VREF + 0.02 V ≤ VIN ≤ 5.5 V | 6 | |
| Load regulation, sourcing | ΔVO(ΔIL) | 8 | 20 | ppm/mA | 0 mA ≤ IL ≤ 20 mA, VREF + 0.6 V ≤ VIN ≤ 5.5 V | 6 | |
| Load regulation, sinking | ΔVO(ΔIL) | 8 | 20 | ppm/mA | 0 mA ≤ IL ≤ -20 mA, VREF + 0.02 V ≤ VIN ≤ 5.5 V | 6 | |
| Supply current, active mode | ICC | 360 | 430 | µA | Active mode | 6 | |
| Supply current, active mode, over temperature | ICC | 460 | µA | -40°C ≤ TA ≤ 125°C | 6 | ||
| Supply current, shutdown mode | ICC | 3.3 | 5 | µA | Shutdown mode | 6 | |
| Supply current, shutdown mode, over temperature | ICC | 9 | µA | -40°C ≤ TA ≤ 125°C | 6 | ||
| Enable voltage, shutdown | 0 | 0.7 | V | Device in shutdown mode (EN = 0) | 6 | ||
| Dropout voltage | 10 | 20 | mV | 6 | |||
| Dropout voltage at 20 mA | 600 | mV | IL = 20 mA | 6 | |||
| Short-circuit current | ISC | 50 | mA | 6 | |||
| Turn-on time | ton | 500 | µs | 0.1% settling, CL = 1 µF | 6 | ||
| Low-frequency noise | 12 | ppmPP | 0.1 Hz ≤ f ≤ 10 Hz | 6 | |||
| Output voltage noise density | 0.25 | ppm/√Hz | f = 100 Hz | 6 | |||
| Stable output capacitor range | CL | 0 | 10 | µF | 6 | ||
| Long-term stability | 25 | ppm | 0 to 1000 hours | 6 | |||
| Output voltage hysteresis, cycle 1 | 60 | ppm | 25°C, -40°C, 125°C, 25°C | 6 | |||
| Output voltage hysteresis, cycle 2 | 35 | ppm | 25°C, -40°C, 125°C, 25°C | 6 | |||
| Input voltage | VIN | -0.3 | 6 | V | 5 | ||
| EN input voltage | EN | -0.3 | V | max is VIN + 0.3 | 5 | ||
| Operating temperature | -55 | 150 | °C | 5 | |||
| Junction temperature | Tj | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 170 | °C | 5 | ||
| ESD HBM | V(ESD) | -2500 | 2500 | V | Human-body model, AEC Q100-002 | 5 | |
| ESD CDM | V(ESD) | -1500 | 1500 | V | Charged-device model, AEC Q100-011 | 5 | |
| Supply input voltage range | VIN | 5.5 | V | IL = 0 mA, TA = 25°C; min is VREF + 0.02 | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 193.6 | °C/W | DDC (SOT23), 5 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 40.2 | °C/W | DDC (SOT23), 5 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 34.5 | °C/W | DDC (SOT23), 5 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 0.9 | °C/W | DDC (SOT23), 5 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 34.3 | °C/W | DDC (SOT23), 5 pins | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
REF2041QDDCRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ref2041qddcrq1-etched.step/ref2041qddcrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref2041qddcrq1.step/ref2041qddcrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
814f93593dcd51fb, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# REF2041QDDCRQ1
**Texas Instruments** · Voltage References · SOT-23-5
REF2041QDDCRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBIAS | output | Bias voltage output equal to VREF / 2, rated for ±20 mA output current with a 50 mA short-circuit current limit. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Enable input; the device is enabled when EN ≥ VIN - 0.7 V, and shutdown mode is entered when EN is 0 to 0.7 V. |
| 4 | VIN | power_in | Input supply voltage with a recommended range of VREF + 0.02 V to 5.5 V and an absolute maximum of 6 V. |
| 5 | VREF | power_in | Reference voltage output (VREF), rated for ±20 mA output current with a 50 mA short-circuit current limit. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | | -0.05 | | 0.05 | % | | 6 |
| Output voltage temperature coefficient | | -8 | 3 | 8 | ppm/°C | -40°C ≤ TA ≤ 125°C | 6 |
| VREF and VBIAS tracking over temperature | | -7 | 2 | 7 | ppm/°C | -40°C ≤ TA ≤ 125°C | 6 |
| Line regulation | ΔVO(ΔVI) | | 3 | 35 | ppm/V | VREF + 0.02 V ≤ VIN ≤ 5.5 V | 6 |
| Load regulation, sourcing | ΔVO(ΔIL) | | 8 | 20 | ppm/mA | 0 mA ≤ IL ≤ 20 mA, VREF + 0.6 V ≤ VIN ≤ 5.5 V | 6 |
| Load regulation, sinking | ΔVO(ΔIL) | | 8 | 20 | ppm/mA | 0 mA ≤ IL ≤ -20 mA, VREF + 0.02 V ≤ VIN ≤ 5.5 V | 6 |
| Supply current, active mode | ICC | | 360 | 430 | µA | Active mode | 6 |
| Supply current, active mode, over temperature | ICC | | | 460 | µA | -40°C ≤ TA ≤ 125°C | 6 |
| Supply current, shutdown mode | ICC | | 3.3 | 5 | µA | Shutdown mode | 6 |
| Supply current, shutdown mode, over temperature | ICC | | | 9 | µA | -40°C ≤ TA ≤ 125°C | 6 |
| Enable voltage, shutdown | | 0 | | 0.7 | V | Device in shutdown mode (EN = 0) | 6 |
| Dropout voltage | | | 10 | 20 | mV | | 6 |
| Dropout voltage at 20 mA | | | | 600 | mV | IL = 20 mA | 6 |
| Short-circuit current | ISC | | 50 | | mA | | 6 |
| Turn-on time | ton | | 500 | | µs | 0.1% settling, CL = 1 µF | 6 |
| Low-frequency noise | | | 12 | | ppmPP | 0.1 Hz ≤ f ≤ 10 Hz | 6 |
| Output voltage noise density | | | 0.25 | | ppm/√Hz | f = 100 Hz | 6 |
| Stable output capacitor range | CL | 0 | | 10 | µF | | 6 |
| Long-term stability | | | 25 | | ppm | 0 to 1000 hours | 6 |
| Output voltage hysteresis, cycle 1 | | | 60 | | ppm | 25°C, -40°C, 125°C, 25°C | 6 |
| Output voltage hysteresis, cycle 2 | | | 35 | | ppm | 25°C, -40°C, 125°C, 25°C | 6 |
| Input voltage | VIN | -0.3 | | 6 | V | | 5 |
| EN input voltage | EN | -0.3 | | | V | max is VIN + 0.3 | 5 |
| Operating temperature | | -55 | | 150 | °C | | 5 |
| Junction temperature | Tj | | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 170 | °C | | 5 |
| ESD HBM | V(ESD) | -2500 | | 2500 | V | Human-body model, AEC Q100-002 | 5 |
| ESD CDM | V(ESD) | -1500 | | 1500 | V | Charged-device model, AEC Q100-011 | 5 |
| Supply input voltage range | VIN | | | 5.5 | V | IL = 0 mA, TA = 25°C; min is VREF + 0.02 | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 193.6 | | °C/W | DDC (SOT23), 5 pins | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 40.2 | | °C/W | DDC (SOT23), 5 pins | 5 |
| Junction-to-board thermal resistance | RθJB | | 34.5 | | °C/W | DDC (SOT23), 5 pins | 5 |
| Junction-to-top characterization parameter | ψJT | | 0.9 | | °C/W | DDC (SOT23), 5 pins | 5 |
| Junction-to-board characterization parameter | ψJB | | 34.3 | | °C/W | DDC (SOT23), 5 pins | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `REF2041QDDCRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ref2041qddcrq1-etched.step` / `ref2041qddcrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref2041qddcrq1.step` / `ref2041qddcrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ref20-q1.pdf) (36 pp, sha256 `814f93593dcd51fb`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ref2041qddcrq1-datasheet.pdf)