Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF2041QDDCRQ1

Texas Instruments · Voltage References · SOT-23-5

REF2041QDDCRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VBIAS output Bias voltage output equal to VREF / 2, rated for ±20 mA output current with a 50 mA short-circuit current limit.
2 GND power_in Ground reference pin for the device.
3 EN input Enable input; the device is enabled when EN ≥ VIN - 0.7 V, and shutdown mode is entered when EN is 0 to 0.7 V.
4 VIN power_in Input supply voltage with a recommended range of VREF + 0.02 V to 5.5 V and an absolute maximum of 6 V.
5 VREF power_in Reference voltage output (VREF), rated for ±20 mA output current with a 50 mA short-circuit current limit.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy -0.05 0.05 % 6
Output voltage temperature coefficient -8 3 8 ppm/°C -40°C ≤ TA ≤ 125°C 6
VREF and VBIAS tracking over temperature -7 2 7 ppm/°C -40°C ≤ TA ≤ 125°C 6
Line regulation ΔVO(ΔVI) 3 35 ppm/V VREF + 0.02 V ≤ VIN ≤ 5.5 V 6
Load regulation, sourcing ΔVO(ΔIL) 8 20 ppm/mA 0 mA ≤ IL ≤ 20 mA, VREF + 0.6 V ≤ VIN ≤ 5.5 V 6
Load regulation, sinking ΔVO(ΔIL) 8 20 ppm/mA 0 mA ≤ IL ≤ -20 mA, VREF + 0.02 V ≤ VIN ≤ 5.5 V 6
Supply current, active mode ICC 360 430 µA Active mode 6
Supply current, active mode, over temperature ICC 460 µA -40°C ≤ TA ≤ 125°C 6
Supply current, shutdown mode ICC 3.3 5 µA Shutdown mode 6
Supply current, shutdown mode, over temperature ICC 9 µA -40°C ≤ TA ≤ 125°C 6
Enable voltage, shutdown 0 0.7 V Device in shutdown mode (EN = 0) 6
Dropout voltage 10 20 mV 6
Dropout voltage at 20 mA 600 mV IL = 20 mA 6
Short-circuit current ISC 50 mA 6
Turn-on time ton 500 µs 0.1% settling, CL = 1 µF 6
Low-frequency noise 12 ppmPP 0.1 Hz ≤ f ≤ 10 Hz 6
Output voltage noise density 0.25 ppm/√Hz f = 100 Hz 6
Stable output capacitor range CL 0 10 µF 6
Long-term stability 25 ppm 0 to 1000 hours 6
Output voltage hysteresis, cycle 1 60 ppm 25°C, -40°C, 125°C, 25°C 6
Output voltage hysteresis, cycle 2 35 ppm 25°C, -40°C, 125°C, 25°C 6
Input voltage VIN -0.3 6 V 5
EN input voltage EN -0.3 V max is VIN + 0.3 5
Operating temperature -55 150 °C 5
Junction temperature Tj 150 °C 5
Storage temperature Tstg -65 170 °C 5
ESD HBM V(ESD) -2500 2500 V Human-body model, AEC Q100-002 5
ESD CDM V(ESD) -1500 1500 V Charged-device model, AEC Q100-011 5
Supply input voltage range VIN 5.5 V IL = 0 mA, TA = 25°C; min is VREF + 0.02 5
Junction-to-ambient thermal resistance RθJA 193.6 °C/W DDC (SOT23), 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 40.2 °C/W DDC (SOT23), 5 pins 5
Junction-to-board thermal resistance RθJB 34.5 °C/W DDC (SOT23), 5 pins 5
Junction-to-top characterization parameter ψJT 0.9 °C/W DDC (SOT23), 5 pins 5
Junction-to-board characterization parameter ψJB 34.3 °C/W DDC (SOT23), 5 pins 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: REF2041QDDCRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ref2041qddcrq1-etched.step / ref2041qddcrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref2041qddcrq1.step / ref2041qddcrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 814f93593dcd51fb, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF