RC0402FR-0733KL - YAGEO

{
 "schema": "adom/verification@1",
 "part": "RC0402FR-0733KL",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "3D model matches the datasheet package dimensions",
   "scope": [
    "3d-model"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "L: model 1.000 mm, datasheet 0.95 to 1.05 mm",
     "result": "pass"
    },
    {
     "text": "W: model 0.500 mm, datasheet 0.45 to 0.55 mm",
     "result": "pass"
    },
    {
     "text": "T/H: model 0.350 mm, datasheet 0.30 to 0.40 mm",
     "result": "pass"
    },
    {
     "text": "I1 (terminal on top): model 0.165 mm, datasheet 0.10 to 0.30 mm",
     "result": "pass"
    },
    {
     "text": "I2 (terminal on bottom): model 0.165 mm, datasheet 0.15 to 0.35 mm",
     "result": "pass"
    },
    {
     "text": "Z-up, seated on z = 0, centred on the footprint origin, long axis on X",
     "result": "pass"
    },
    {
     "text": "no YAGEO STEP is reachable by plain HTTP for this part number (the product page builds its CAD links in the browser); the model is KiCad's library package, bytes unchanged, checked against the datasheet table",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "overlay (top, bottom, side, end at true scale)",
     "href": "docs/verify/rc0402fr-0733kl-overlay.png"
    },
    {
     "label": "numbers",
     "href": "docs/verify/rc0402fr-0733kl-check.json"
    },
    {
     "label": "datasheet p.4 Table 1",
     "href": "docs/figures/rc-p04-dimensions.png"
    },
    {
     "label": "datasheet (YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025)",
     "href": "docs/rc0402fr-0733kl-datasheet.pdf"
    }
   ],
   "files": {
    "RC0402FR-0733KL.step": "91507e5af4251cb4ef38e04889c9b98da29904432bd83786bba13ae9b605eacb",
    "docs/rc0402fr-0733kl-datasheet.pdf": "7b6f0ae72708ca4b38126f84b5407a3e970a94cb60bc1a0afdaeb25a23d839bb"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Footprint compared with YAGEO's recommended land pattern",
   "scope": [
    "footprint"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "gap between lands: KiCad 0.48 mm, YAGEO 0.50 mm (difference -0.02 mm)",
     "result": "pass"
    },
    {
     "text": "land length: KiCad 0.54 mm, YAGEO 0.50 mm (difference +0.04 mm)",
     "result": "pass"
    },
    {
     "text": "land width: KiCad 0.64 mm, YAGEO 0.60 mm (difference +0.04 mm)",
     "result": "pass"
    },
    {
     "text": "overall length: KiCad 1.56 mm, YAGEO 1.50 mm (difference +0.06 mm)",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "comparison drawing",
     "href": "land-pattern/land-pattern.png"
    },
    {
     "label": "numbers",
     "href": "land-pattern/land-check.json"
    },
    {
     "label": "write-up",
     "href": "land-pattern/README.md"
    },
    {
     "label": "YAGEO Mounting p.4",
     "href": "docs/figures/mount-p04-land.png"
    }
   ],
   "files": {
    "R_0402_1005Metric_RC0402FR-0733KL.kicad_mod": "242f3a3163eb083e2cc58df4da995ddab3d506f17c39d1b8d75b3a7b42a53174"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Marking: the real part is unmarked",
   "scope": [
    "3d-model",
    "marking"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "YAGEO states 'No Marking' for RC0402 (Fig. 1) (RC_L product specification V.14, p.3 'Marking')",
     "result": "pass"
    },
    {
     "text": "no AI-added part-number etch on any model (a 1.0 x 0.5 mm top has no room for a readable 15-character MPN)",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet p.3 Marking",
     "href": "docs/figures/rc-p03-marking.png"
    }
   ],
   "files": {
    "RC0402FR-0733KL.step": "91507e5af4251cb4ef38e04889c9b98da29904432bd83786bba13ae9b605eacb"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Board-use LOD GLBs are clean and share the STEP pose",
   "scope": [
    "lod"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "four levels written, read back, bounds equal the STEP (Z-up, metres, seat z = 0)",
     "result": "pass"
    },
    {
     "text": "no footprint, pad outline, label or silkscreen helpers; terminals present at every level",
     "result": "pass"
    },
    {
     "text": "no marking at any level (the part has none)",
     "result": "pass"
    },
    {
     "text": "previews looked at by the AI agent, not yet by a person",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "manifest",
     "href": "lod/manifest.json"
    }
   ],
   "files": {
    "lod/high.glb": "937b453eb265ddd04ca7a8c8304011d48f266ea8480694ebc583239a0d7cadba",
    "lod/medium.glb": "f1a1e14478c0215d3650a8778ea37ac93f54a7c3d374c4746fa9c73f360173af",
    "lod/low.glb": "d37b55a8dfb67f15b654633a1aae33e2650ddf5c0f4a777162d6dfb02f6f17d0",
    "lod/super-low.glb": "67a651d5d26113d4f0178bcf5805d1b785a8a0a863e16285ac4e72402a8e7fef"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Pin 1, polarity and symbol",
   "scope": [
    "footprint",
    "3d-model",
    "symbol"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "non-polar two-terminal resistor: pads 1 and 2 are interchangeable; symbol pins 1 and 2 map to pads 1 and 2",
     "result": "pass"
    },
    {
     "text": "symbol pin ends at (0, +5.08) and (0, -5.08) mm, on the 2.54 mm grid",
     "result": "pass"
    },
    {
     "text": "symbol fields MPN, Manufacturer, Mouser, DigiKey, LCSC, Datasheet and Footprint filled",
     "result": "pass"
    },
    {
     "text": "model terminals sit on the footprint pads (both centred on the origin, long axis on X)",
     "result": "pass"
    }
   ],
   "evidence": [],
   "files": {
    "R_0402_1005Metric_RC0402FR-0733KL.kicad_mod": "242f3a3163eb083e2cc58df4da995ddab3d506f17c39d1b8d75b3a7b42a53174",
    "RC0402FR-0733KL.kicad_sym": "90937c1a36ef828412cc7dadd03cdcf51258c630ec214d45526fe6e5ced2f236",
    "RC0402FR-0733KL.step": "91507e5af4251cb4ef38e04889c9b98da29904432bd83786bba13ae9b605eacb"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Hero GLB built to the adom-hero standard",
   "scope": [
    "3d-model",
    "hero"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "built with component-hero hero_glb.py from package-reference.glb, the footprint and page.json; alignment check OK",
     "result": "pass"
    },
    {
     "text": "teal dashed pad outlines (alpha 0.5), silkscreen (alpha 0.3) and pad-number labels 1 and 2 (alpha 0.5); no pin-1 dot because the part is non-polar",
     "result": "pass"
    },
    {
     "text": "preview looked at by the AI agent; the live wiki viewer still needs a person's look",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "preview",
     "href": "docs/verify/hero-preview.png"
    },
    {
     "label": "overlay record",
     "href": "rc0402fr-0733kl-hero.overlay.json"
    }
   ],
   "files": {
    "rc0402fr-0733kl-hero.glb": "ecd12e887d36afdf5b5d71b359abc14f5559acff956b4db489d4d7553a6dec83",
    "package-reference.glb": "e0f0a1b3f86b307421456f2e9945d22b4d3e222a7ec62e602fc97c5e6a7f34c3"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Fusion and Altium libraries generated from the KiCad symbol and footprint",
   "scope": [
    "symbol",
    "footprint"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "adom-lbr generate --part-metadata page.json: .lbr lint passed (MPN, MANUFACTURER, MOUSER_PN, DIGIKEY_PN, LCSC_PN attributes)",
     "result": "pass"
    },
    {
     "text": "adom-lbr import-kicad then assemble-altium --no-dedupe: native .SchLib and .PcbLib written, STEP body embedded (models.embedded 1); the KiCad fields carried as Altium parameters",
     "result": "pass"
    },
    {
     "text": "not yet opened in Fusion or Altium (no desktop app used for this page)",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {
    "RC0402FR-0733KL.lbr": "743fe29cb17bc8b2b7bd1ffb2065ab10c72cdf88e2abc6a9e71b8a2b4f308fbb",
    "altium/RC0402FR-0733KL.SchLib": "b2bfe1a45b7d703533b0362284a83835e7c57afbdc6d15516562ecb5546b5f42",
    "altium/RC0402FR-0733KL.PcbLib": "55b89e4781a382eda765f2f7d2fdc17305c955aa2b2afa9560ad132e0be78302",
    "RC0402FR-0733KL.adom-lbr.json": "6e90f7d7e0ea41520f00ceda7e45b5bc11a5068833ff34b22b4a5e564cb01c2b"
   }
  }
 ]
}