main
Ray
Publish 0.1.0
d30581d
RAA7884QT4GSP#HB0
RENESAS · RS-485 / RS-422 ICs · SOIC-16
RAA7884QT4GSP#HB0 from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DI1 | input | Channel 1 driver input; low forces Y1 low and Z1 high, high forces Y1 high and Z1 low. |
| 2 | Y1 | tri_state | Channel 1 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 3 | Z1 | tri_state | Channel 1 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 4 | EN | input | Group driver output enable internally pulled high to VCC; outputs are high impedance only when EN is low and the other enable is high (tie unused enable pins with a 1k resistor to VCC). |
| 5 | Z2 | tri_state | Channel 2 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 6 | Y2 | tri_state | Channel 2 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 7 | DI2 | input | Channel 2 driver input; low forces Y2 low and Z2 high, high forces Y2 high and Z2 low. |
| 8 | GND | power_in | Ground connection. |
| 9 | DI3 | input | Channel 3 driver input; low forces Y3 low and Z3 high, high forces Y3 high and Z3 low. |
| 10 | Y3 | tri_state | Channel 3 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 11 | Z3 | tri_state | Channel 3 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 12 | EN | input | Group driver output enable internally pulled high to VCC; outputs are high impedance only when EN is low and the other enable is high (tie unused enable pins with a 1k resistor to VCC). |
| 13 | Z4 | tri_state | Channel 4 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 14 | Y4 | tri_state | Channel 4 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 15 | DI4 | input | Channel 4 driver input; low forces Y4 low and Z4 high, high forces Y4 high and Z4 low. |
| 16 | VCC | power_in | System power supply input, 3.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential output voltage, no load | VOD | 2.5 | V | No load, Full temp (max printed as VCC) | 5 | ||
| Differential output voltage VCC ≥ 3V | VOD | 2 | 2.6 | V | RL = 100Ω, VCC ≥ 3V, Full | 5 | |
| Differential output voltage VCC ≥ 4.5V | VOD | 3 | 4 | V | RL = 100Ω, VCC ≥ 4.5V, Full | 5 | |
| Single-ended output high voltage | VOH | 2.4 | 2.7 | V | IO = -20mA, Full | 5 | |
| Single-ended output low voltage | VOL | 0.2 | 0.4 | V | IO = 20mA, Full | 5 | |
| Change in magnitude of differential VOUT | ΔVOD | 0.01 | 0.2 | V | RL = 100Ω, Full | 5 | |
| Driver common-mode VOUT | VOC | 2.6 | 3 | V | RL = 100Ω, Full | 5 | |
| Change in magnitude of common-mode VOUT | ΔVOC | 0.01 | 0.2 | V | RL = 100Ω, Full | 5 | |
| Input high voltage (3.0V-3.6V) | VIH1 | 2.2 | V | 3.0V ≤ VCC ≤ 3.6V, DI and ENs, Full | 5 | ||
| Input high voltage DI (4.5V-5.5V) | VIH2 | 2.7 | V | 4.5V ≤ VCC ≤ 5.5V, DI, Full | 5 | ||
| Input high voltage ENs (4.5V-5.5V) | VIH2E | 2.4 | V | 4.5V ≤ VCC ≤ 5.5V, ENs, Full | 5 | ||
| Input low voltage | VIL1 | 0.8 | V | 3.0V ≤ VCC ≤ 5.5V, DI and ENs, Full | 5 | ||
| Logic input current DI | IIN1 | -1 | 1 | µA | DIX = 0V or VCC, Full | 5 | |
| Logic input current EN | IIN2 | -15 | 9 | 15 | µA | EN, EN, Full | 5 |
| Output leakage current (Y, Z) | IOZ | -10 | 10 | µA | EN = 0, VCC = 0V to 5.5V, -0.25 ≤ VO ≤ 6V, Full | 5 | |
| Output leakage current (Y, Z) at +25°C | IOZ | -8 | 8 | nA | EN = 0, VCC = 3V to 5.5V, VO = 0V to VCC, +25°C | 5 | |
| Output leakage current (Y, Z) -20 to +40°C | IOZ | -30 | 30 | nA | EN = 0, VCC = 3V to 5.5V, VO = 0V to VCC, Note 14 | 5 | |
| Driver short-circuit current to 0V | IOSD1 | 150 | mA | EN = 1, VY or VZ = 0V (Note 8), Full; printed ±150 | 5 | ||
| Driver short-circuit current to VCC | IOSD1 | 200 | mA | EN = 1, VY or VZ = VCC (Note 8), Full; printed ±200 | 5 | ||
| Thermal shutdown threshold | TSD | 160 | °C | Full | 5 | ||
| No-load supply current | ICC | 0.6 | 0.8 | mA | DI = 0V or VCC, EN = 1, Full | 5 | |
| Shutdown supply current | ISHDN | 60 | 90 | µA | DI = 0V or VCC, EN = 0, /EN = 1, Full | 5 | |
| ESD IEC61000-4-2 air gap, Y/Z | 16.5 | kV | IEC61000-4-2, bus pins to GND, +25°C; printed ±16.5 | 5 | |||
| ESD IEC61000-4-2 contact, Y/Z | 9 | kV | IEC61000-4-2, bus pins to GND, +25°C; printed ±9 | 5 | |||
| ESD HBM, Y/Z | 15 | kV | Human Body Model, bus pins to GND, +25°C; printed ±15 | 5 | |||
| ESD HBM all pins | 12 | kV | HBM, MIL-STD-883 Method 3015, +25°C; printed ±12 | 5 | |||
| ESD machine model all pins | 700 | V | Machine Model, +25°C | 5 | |||
| Maximum data rate | fMAX | 50 | Mbps | VOD = ±1.5V, CD = 100pF (see Figure 7), Full | 5 | ||
| Driver single-ended output delay | tPLH, tPHL | 3 | 8 | 15 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 5 |
| Driver single-ended output skew | tSSK | 1 | 3.5 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 5 | |
| Channel-to-channel output delay skew | tSKCC | 3 | 5.5 | ns | Figure 5, Note 12, Full | 6 | |
| Part-to-part output delay skew | tSKPP | 8 | ns | Figure 5, Note 9, Full | 6 | ||
| Driver differential output skew | tDSK | 0.5 | 2 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 6 | |
| Driver differential rise or fall time | tR, tF | 7 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 6 | ||
| Driver enable to output high | tZH | 20 | ns | SW = GND (see Figure 6), Full | 6 | ||
| Driver enable to output low | tZL | 20 | ns | SW = VCC (see Figure 6), Full | 6 | ||
| Driver disable from output high | tHZ | 20 | ns | SW = GND (see Figure 6), Full | 6 | ||
| Driver disable from output low | tLZ | 20 | ns | SW = VCC (see Figure 6), Full | 6 | ||
| Supply voltage | VCC | 3 | 5.5 | V | 4 | ||
| Ambient temperature | -40 | 125 | °C | 4 | |||
| VCC to GND | VCC | 7 | V | 4 | |||
| Input voltages DI, EN | -0.3 | 7 | V | All varieties | 4 | ||
| Output voltages Y, Z | -0.5 | 7 | V | 4 | |||
| Output current Y, Z | 100 | mA | per output, continuous, TJ ≤ 125°C | 4 | |||
| Maximum junction temperature | TJ | 150 | °C | Plastic package | 4 | ||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Thermal resistance junction to ambient | θJA | 71 | °C/W | 16 Ld SOIC, Notes 5, 6 | 4 | ||
| Thermal resistance junction to case | θJC | 32 | °C/W | 16 Ld SOIC, Notes 5, 6 | 4 |
CAD (KiCad official)
- Symbol:
RAA7884QT4GSP#HB0 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
raa7884qt4gsp-hb0-etched.step/raa7884qt4gsp-hb0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa7884qt4gsp-hb0.step/raa7884qt4gsp-hb0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (15 pp, sha256
c2ac49ceff7c92a9, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RAA7884QT4GSP#HB0
**RENESAS** · RS-485 / RS-422 ICs · SOIC-16
RAA7884QT4GSP#HB0 from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DI1 | input | Channel 1 driver input; low forces Y1 low and Z1 high, high forces Y1 high and Z1 low. |
| 2 | Y1 | tri_state | Channel 1 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 3 | Z1 | tri_state | Channel 1 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 4 | EN | input | Group driver output enable internally pulled high to VCC; outputs are high impedance only when EN is low and the other enable is high (tie unused enable pins with a 1k resistor to VCC). |
| 5 | Z2 | tri_state | Channel 2 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 6 | Y2 | tri_state | Channel 2 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 7 | DI2 | input | Channel 2 driver input; low forces Y2 low and Z2 high, high forces Y2 high and Z2 low. |
| 8 | GND | power_in | Ground connection. |
| 9 | DI3 | input | Channel 3 driver input; low forces Y3 low and Z3 high, high forces Y3 high and Z3 low. |
| 10 | Y3 | tri_state | Channel 3 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 11 | Z3 | tri_state | Channel 3 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 12 | EN | input | Group driver output enable internally pulled high to VCC; outputs are high impedance only when EN is low and the other enable is high (tie unused enable pins with a 1k resistor to VCC). |
| 13 | Z4 | tri_state | Channel 4 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 14 | Y4 | tri_state | Channel 4 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable. |
| 15 | DI4 | input | Channel 4 driver input; low forces Y4 low and Z4 high, high forces Y4 high and Z4 low. |
| 16 | VCC | power_in | System power supply input, 3.0V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential output voltage, no load | VOD | 2.5 | | | V | No load, Full temp (max printed as VCC) | 5 |
| Differential output voltage VCC ≥ 3V | VOD | 2 | 2.6 | | V | RL = 100Ω, VCC ≥ 3V, Full | 5 |
| Differential output voltage VCC ≥ 4.5V | VOD | 3 | 4 | | V | RL = 100Ω, VCC ≥ 4.5V, Full | 5 |
| Single-ended output high voltage | VOH | 2.4 | 2.7 | | V | IO = -20mA, Full | 5 |
| Single-ended output low voltage | VOL | | 0.2 | 0.4 | V | IO = 20mA, Full | 5 |
| Change in magnitude of differential VOUT | ΔVOD | | 0.01 | 0.2 | V | RL = 100Ω, Full | 5 |
| Driver common-mode VOUT | VOC | | 2.6 | 3 | V | RL = 100Ω, Full | 5 |
| Change in magnitude of common-mode VOUT | ΔVOC | | 0.01 | 0.2 | V | RL = 100Ω, Full | 5 |
| Input high voltage (3.0V-3.6V) | VIH1 | 2.2 | | | V | 3.0V ≤ VCC ≤ 3.6V, DI and ENs, Full | 5 |
| Input high voltage DI (4.5V-5.5V) | VIH2 | 2.7 | | | V | 4.5V ≤ VCC ≤ 5.5V, DI, Full | 5 |
| Input high voltage ENs (4.5V-5.5V) | VIH2E | 2.4 | | | V | 4.5V ≤ VCC ≤ 5.5V, ENs, Full | 5 |
| Input low voltage | VIL1 | | | 0.8 | V | 3.0V ≤ VCC ≤ 5.5V, DI and ENs, Full | 5 |
| Logic input current DI | IIN1 | -1 | | 1 | µA | DIX = 0V or VCC, Full | 5 |
| Logic input current EN | IIN2 | -15 | 9 | 15 | µA | EN, EN, Full | 5 |
| Output leakage current (Y, Z) | IOZ | -10 | | 10 | µA | EN = 0, VCC = 0V to 5.5V, -0.25 ≤ VO ≤ 6V, Full | 5 |
| Output leakage current (Y, Z) at +25°C | IOZ | -8 | | 8 | nA | EN = 0, VCC = 3V to 5.5V, VO = 0V to VCC, +25°C | 5 |
| Output leakage current (Y, Z) -20 to +40°C | IOZ | -30 | | 30 | nA | EN = 0, VCC = 3V to 5.5V, VO = 0V to VCC, Note 14 | 5 |
| Driver short-circuit current to 0V | IOSD1 | | | 150 | mA | EN = 1, VY or VZ = 0V (Note 8), Full; printed ±150 | 5 |
| Driver short-circuit current to VCC | IOSD1 | | | 200 | mA | EN = 1, VY or VZ = VCC (Note 8), Full; printed ±200 | 5 |
| Thermal shutdown threshold | TSD | | 160 | | °C | Full | 5 |
| No-load supply current | ICC | | 0.6 | 0.8 | mA | DI = 0V or VCC, EN = 1, Full | 5 |
| Shutdown supply current | ISHDN | | 60 | 90 | µA | DI = 0V or VCC, EN = 0, /EN = 1, Full | 5 |
| ESD IEC61000-4-2 air gap, Y/Z | | | 16.5 | | kV | IEC61000-4-2, bus pins to GND, +25°C; printed ±16.5 | 5 |
| ESD IEC61000-4-2 contact, Y/Z | | | 9 | | kV | IEC61000-4-2, bus pins to GND, +25°C; printed ±9 | 5 |
| ESD HBM, Y/Z | | | 15 | | kV | Human Body Model, bus pins to GND, +25°C; printed ±15 | 5 |
| ESD HBM all pins | | | 12 | | kV | HBM, MIL-STD-883 Method 3015, +25°C; printed ±12 | 5 |
| ESD machine model all pins | | | 700 | | V | Machine Model, +25°C | 5 |
| Maximum data rate | fMAX | 50 | | | Mbps | VOD = ±1.5V, CD = 100pF (see Figure 7), Full | 5 |
| Driver single-ended output delay | tPLH, tPHL | 3 | 8 | 15 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 5 |
| Driver single-ended output skew | tSSK | | 1 | 3.5 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 5 |
| Channel-to-channel output delay skew | tSKCC | | 3 | 5.5 | ns | Figure 5, Note 12, Full | 6 |
| Part-to-part output delay skew | tSKPP | | | 8 | ns | Figure 5, Note 9, Full | 6 |
| Driver differential output skew | tDSK | | 0.5 | 2 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 6 |
| Driver differential rise or fall time | tR, tF | | | 7 | ns | RDIFF = 100Ω, CD = 50pF (see Figure 5), Full | 6 |
| Driver enable to output high | tZH | | | 20 | ns | SW = GND (see Figure 6), Full | 6 |
| Driver enable to output low | tZL | | | 20 | ns | SW = VCC (see Figure 6), Full | 6 |
| Driver disable from output high | tHZ | | | 20 | ns | SW = GND (see Figure 6), Full | 6 |
| Driver disable from output low | tLZ | | | 20 | ns | SW = VCC (see Figure 6), Full | 6 |
| Supply voltage | VCC | 3 | | 5.5 | V | | 4 |
| Ambient temperature | | -40 | | 125 | °C | | 4 |
| VCC to GND | VCC | | | 7 | V | | 4 |
| Input voltages DI, EN | | -0.3 | | 7 | V | All varieties | 4 |
| Output voltages Y, Z | | -0.5 | | 7 | V | | 4 |
| Output current Y, Z | | | | 100 | mA | per output, continuous, TJ ≤ 125°C | 4 |
| Maximum junction temperature | TJ | | | 150 | °C | Plastic package | 4 |
| Storage temperature range | | -65 | | 150 | °C | | 4 |
| Thermal resistance junction to ambient | θJA | | 71 | | °C/W | 16 Ld SOIC, Notes 5, 6 | 4 |
| Thermal resistance junction to case | θJC | | 32 | | °C/W | 16 Ld SOIC, Notes 5, 6 | 4 |
## CAD (KiCad official)
- Symbol: `RAA7884QT4GSP#HB0`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `raa7884qt4gsp-hb0-etched.step` / `raa7884qt4gsp-hb0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `raa7884qt4gsp-hb0.step` / `raa7884qt4gsp-hb0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/raa7884qt4gsp-hb0-datasheet.pdf) (15 pp, sha256 `c2ac49ceff7c92a9`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/raa7884qt4gsp-hb0-datasheet.pdf)