Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RAA7884QT4GSP#HB0

RENESAS · RS-485 / RS-422 ICs · SOIC-16

RAA7884QT4GSP#HB0 from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DI1 input Channel 1 driver input; low forces Y1 low and Z1 high, high forces Y1 high and Z1 low.
2 Y1 tri_state Channel 1 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
3 Z1 tri_state Channel 1 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
4 EN input Group driver output enable internally pulled high to VCC; outputs are high impedance only when EN is low and the other enable is high (tie unused enable pins with a 1k resistor to VCC).
5 Z2 tri_state Channel 2 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
6 Y2 tri_state Channel 2 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
7 DI2 input Channel 2 driver input; low forces Y2 low and Z2 high, high forces Y2 high and Z2 low.
8 GND power_in Ground connection.
9 DI3 input Channel 3 driver input; low forces Y3 low and Z3 high, high forces Y3 high and Z3 low.
10 Y3 tri_state Channel 3 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
11 Z3 tri_state Channel 3 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
12 EN input Group driver output enable internally pulled high to VCC; outputs are high impedance only when EN is low and the other enable is high (tie unused enable pins with a 1k resistor to VCC).
13 Z4 tri_state Channel 4 inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
14 Y4 tri_state Channel 4 non-inverting RS-422 transmitter output, ±16.5kV IEC61000-4-2 ESD protected, tri-statable.
15 DI4 input Channel 4 driver input; low forces Y4 low and Z4 high, high forces Y4 high and Z4 low.
16 VCC power_in System power supply input, 3.0V to 5.5V.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential output voltage, no load VOD 2.5 V No load, Full temp (max printed as VCC) 5
Differential output voltage VCC ≥ 3V VOD 2 2.6 V RL = 100Ω, VCC ≥ 3V, Full 5
Differential output voltage VCC ≥ 4.5V VOD 3 4 V RL = 100Ω, VCC ≥ 4.5V, Full 5
Single-ended output high voltage VOH 2.4 2.7 V IO = -20mA, Full 5
Single-ended output low voltage VOL 0.2 0.4 V IO = 20mA, Full 5
Change in magnitude of differential VOUT ΔVOD 0.01 0.2 V RL = 100Ω, Full 5
Driver common-mode VOUT VOC 2.6 3 V RL = 100Ω, Full 5
Change in magnitude of common-mode VOUT ΔVOC 0.01 0.2 V RL = 100Ω, Full 5
Input high voltage (3.0V-3.6V) VIH1 2.2 V 3.0V ≤ VCC ≤ 3.6V, DI and ENs, Full 5
Input high voltage DI (4.5V-5.5V) VIH2 2.7 V 4.5V ≤ VCC ≤ 5.5V, DI, Full 5
Input high voltage ENs (4.5V-5.5V) VIH2E 2.4 V 4.5V ≤ VCC ≤ 5.5V, ENs, Full 5
Input low voltage VIL1 0.8 V 3.0V ≤ VCC ≤ 5.5V, DI and ENs, Full 5
Logic input current DI IIN1 -1 1 µA DIX = 0V or VCC, Full 5
Logic input current EN IIN2 -15 9 15 µA EN, EN, Full 5
Output leakage current (Y, Z) IOZ -10 10 µA EN = 0, VCC = 0V to 5.5V, -0.25 ≤ VO ≤ 6V, Full 5
Output leakage current (Y, Z) at +25°C IOZ -8 8 nA EN = 0, VCC = 3V to 5.5V, VO = 0V to VCC, +25°C 5
Output leakage current (Y, Z) -20 to +40°C IOZ -30 30 nA EN = 0, VCC = 3V to 5.5V, VO = 0V to VCC, Note 14 5
Driver short-circuit current to 0V IOSD1 150 mA EN = 1, VY or VZ = 0V (Note 8), Full; printed ±150 5
Driver short-circuit current to VCC IOSD1 200 mA EN = 1, VY or VZ = VCC (Note 8), Full; printed ±200 5
Thermal shutdown threshold TSD 160 °C Full 5
No-load supply current ICC 0.6 0.8 mA DI = 0V or VCC, EN = 1, Full 5
Shutdown supply current ISHDN 60 90 µA DI = 0V or VCC, EN = 0, /EN = 1, Full 5
ESD IEC61000-4-2 air gap, Y/Z 16.5 kV IEC61000-4-2, bus pins to GND, +25°C; printed ±16.5 5
ESD IEC61000-4-2 contact, Y/Z 9 kV IEC61000-4-2, bus pins to GND, +25°C; printed ±9 5
ESD HBM, Y/Z 15 kV Human Body Model, bus pins to GND, +25°C; printed ±15 5
ESD HBM all pins 12 kV HBM, MIL-STD-883 Method 3015, +25°C; printed ±12 5
ESD machine model all pins 700 V Machine Model, +25°C 5
Maximum data rate fMAX 50 Mbps VOD = ±1.5V, CD = 100pF (see Figure 7), Full 5
Driver single-ended output delay tPLH, tPHL 3 8 15 ns RDIFF = 100Ω, CD = 50pF (see Figure 5), Full 5
Driver single-ended output skew tSSK 1 3.5 ns RDIFF = 100Ω, CD = 50pF (see Figure 5), Full 5
Channel-to-channel output delay skew tSKCC 3 5.5 ns Figure 5, Note 12, Full 6
Part-to-part output delay skew tSKPP 8 ns Figure 5, Note 9, Full 6
Driver differential output skew tDSK 0.5 2 ns RDIFF = 100Ω, CD = 50pF (see Figure 5), Full 6
Driver differential rise or fall time tR, tF 7 ns RDIFF = 100Ω, CD = 50pF (see Figure 5), Full 6
Driver enable to output high tZH 20 ns SW = GND (see Figure 6), Full 6
Driver enable to output low tZL 20 ns SW = VCC (see Figure 6), Full 6
Driver disable from output high tHZ 20 ns SW = GND (see Figure 6), Full 6
Driver disable from output low tLZ 20 ns SW = VCC (see Figure 6), Full 6
Supply voltage VCC 3 5.5 V 4
Ambient temperature -40 125 °C 4
VCC to GND VCC 7 V 4
Input voltages DI, EN -0.3 7 V All varieties 4
Output voltages Y, Z -0.5 7 V 4
Output current Y, Z 100 mA per output, continuous, TJ ≤ 125°C 4
Maximum junction temperature TJ 150 °C Plastic package 4
Storage temperature range -65 150 °C 4
Thermal resistance junction to ambient θJA 71 °C/W 16 Ld SOIC, Notes 5, 6 4
Thermal resistance junction to case θJC 32 °C/W 16 Ld SOIC, Notes 5, 6 4

CAD (KiCad official)

  • Symbol: RAA7884QT4GSP#HB0
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: raa7884qt4gsp-hb0-etched.step / raa7884qt4gsp-hb0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); raa7884qt4gsp-hb0.step / raa7884qt4gsp-hb0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (15 pp, sha256 c2ac49ceff7c92a9, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF