main
Ray Publish 0.1.0 128cd78

RAA7884QR4GSP#HB0

RENESAS · RS-485 / RS-422 ICs · SOIC-16

RAA7884QR4GSP#HB0 from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 B1 input Channel 1 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
2 A1 input Channel 1 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
3 RO1 tri_state Channel 1 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating.
4 EN input Group receiver output enable, internally pulled high to VCC, that enables all outputs when high; if unused, connect to VCC through a 1kΩ or greater resistor.
5 RO2 tri_state Channel 2 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating.
6 A2 input Channel 2 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
7 B2 input Channel 2 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
8 GND power_in Ground connection.
9 B3 input Channel 3 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
10 A3 input Channel 3 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
11 RO3 tri_state Channel 3 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating.
12 /EN input Group receiver output enable (active low), internally pulled high to VCC, that enables all outputs when low; if unused, connect directly to GND.
13 RO4 tri_state Channel 4 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating.
14 A4 input Channel 4 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
15 B4 input Channel 4 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range.
16 VCC power_in System power supply input, 3.0V to 5.5V.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input High Voltage (Enable Pins) VIH1 2 V 3.0V ≤ VCC ≤ 3.6V 5
Input High Voltage (Enable Pins) VIH1 2.2 V 4.5V ≤ VCC ≤ 5.5V 5
Input Low Voltage (Enable Pins) VIL 0.8 V 3.0V ≤ VCC ≤ 5.5V 5
Logic Input Current IIN1 -15 15 µA EN, EN 5
Receiver Differential Threshold Voltage VTH -200 200 mV -7V ≤ VCM ≤ 12V 5
Receiver Input Hysteresis ΔVTH 30 mV VCM = 0V 5
Input Current (A, B) IIN3 0.2 mA VCC = 0V or 5.5V, VIN = 12V 5
Input Current (A, B) IIN3 -0.2 mA VCC = 0V or 5.5V, VIN = -7V 5
Receiver Input Resistance RIN 48 kΩ -7V ≤ VCM ≤ 12V 5
Receiver Output Leakage Current IOZ -10 10 µA EN = 0V, 0V ≤ VO ≤ VCC 5
Receiver Short-Circuit Current IOS -165 165 mA EN = 1, 0V ≤ VO ≤ VCC 5
Receiver Output High Voltage VOH1 2.4 V 3.0V ≤ VCC ≤ 3.6V, IO = -6mA, VID = 200mV 5
Receiver Output Low Voltage VOL 0.4 V 3.0V ≤ VCC ≤ 5.5V, IO = 8mA, VID = -200mV 5
No Load Supply Current ICC 15 mA EN = 1, or EN = 0 5
Shutdown Supply Current ISHDN 15 µA All outputs disabled (Note 12) 5
Maximum Data Rate fMAX 80 Mbps VID = ±1.5V, CL ≤ 15pF, VCC ≤ 3.6V 5
Maximum Data Rate fMAX 50 Mbps VID = ±1.5V, CL ≤ 15pF, VCC > 3.6V 5
Receiver Input to Output Delay tPLH, tPHL 6 11 16 ns 5
Receiver Skew / tPLH - tPHL / tSKD 0.4 2 ns 5
Prop Delay Skew Channel-to-Channel tSKC-C 0.7 4 ns Figure 3, Note 7 5
Prop Delay Skew Part-to-Part tSKP-P 1.2 8 ns Figure 3, Note 8 5
Receiver Disable from Output High tHZ 18 30 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 4) 5
Receiver Disable from Output Low tLZ 19 30 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 4) 5
Receiver Enable from Shutdown to Output High tZH(SHDN) 850 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 4, Note 13) 5
Receiver Enable from Shutdown to Output Low tZL(SHDN) 850 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 4, Notes 13) 5
VCC to GND VCC 7 V 4
Input Voltage EN EN -0.3 7 V All varieties 4
Input Voltage A, B A, B -9 13 V 4
Output Voltage RO RO -0.5 V Maximum is VCC + 0.3 4
Maximum Junction Temperature TJ 150 °C Plastic Package 4
Storage Temperature Range TSTG -65 150 °C 4
Supply Voltage VCC 3 5.5 V 4
Ambient Temperature TA -40 125 °C 4
Bus Pin Common-Mode Voltage Range VCM -7 12 V 4
RO Output Current IO -9 9 mA 4
RO Load Capacitance CL 15 pF ≤15pF 4
Thermal Resistance Junction to Ambient θJA 70 °C/W 16 Ld SOIC Package (Notes 4, 5) 4
Thermal Resistance Junction to Case θJC 30 °C/W 16 Ld SOIC Package (Notes 4, 5) 4

CAD (KiCad official)

  • Symbol: RAA7884QR4GSP#HB0
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: raa7884qr4gsp-hb0-etched.step / raa7884qr4gsp-hb0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); raa7884qr4gsp-hb0.step / raa7884qr4gsp-hb0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (13 pp, sha256 b92d2fce4f55f787, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF