3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRAA7884QR4GSP#HB0
RENESAS · RS-485 / RS-422 ICs · SOIC-16
RAA7884QR4GSP#HB0 from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B1 | input | Channel 1 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 2 | A1 | input | Channel 1 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 3 | RO1 | tri_state | Channel 1 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating. |
| 4 | EN | input | Group receiver output enable, internally pulled high to VCC, that enables all outputs when high; if unused, connect to VCC through a 1kΩ or greater resistor. |
| 5 | RO2 | tri_state | Channel 2 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating. |
| 6 | A2 | input | Channel 2 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 7 | B2 | input | Channel 2 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 8 | GND | power_in | Ground connection. |
| 9 | B3 | input | Channel 3 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 10 | A3 | input | Channel 3 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 11 | RO3 | tri_state | Channel 3 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating. |
| 12 | /EN | input | Group receiver output enable (active low), internally pulled high to VCC, that enables all outputs when low; if unused, connect directly to GND. |
| 13 | RO4 | tri_state | Channel 4 tri-state receiver output: high if A-B ≥ 200mV, low if A-B ≤ -200mV, and high if A and B are floating. |
| 14 | A4 | input | Channel 4 non-inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 15 | B4 | input | Channel 4 inverting receiver input, RS-485/422 level, ±16.5kV IEC61000-4-2 ESD protected, with -7V to +12V common-mode range. |
| 16 | VCC | power_in | System power supply input, 3.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input High Voltage (Enable Pins) | VIH1 | 2 | V | 3.0V ≤ VCC ≤ 3.6V | 5 | ||
| Input High Voltage (Enable Pins) | VIH1 | 2.2 | V | 4.5V ≤ VCC ≤ 5.5V | 5 | ||
| Input Low Voltage (Enable Pins) | VIL | 0.8 | V | 3.0V ≤ VCC ≤ 5.5V | 5 | ||
| Logic Input Current | IIN1 | -15 | 15 | µA | EN, EN | 5 | |
| Receiver Differential Threshold Voltage | VTH | -200 | 200 | mV | -7V ≤ VCM ≤ 12V | 5 | |
| Receiver Input Hysteresis | ΔVTH | 30 | mV | VCM = 0V | 5 | ||
| Input Current (A, B) | IIN3 | 0.2 | mA | VCC = 0V or 5.5V, VIN = 12V | 5 | ||
| Input Current (A, B) | IIN3 | -0.2 | mA | VCC = 0V or 5.5V, VIN = -7V | 5 | ||
| Receiver Input Resistance | RIN | 48 | kΩ | -7V ≤ VCM ≤ 12V | 5 | ||
| Receiver Output Leakage Current | IOZ | -10 | 10 | µA | EN = 0V, 0V ≤ VO ≤ VCC | 5 | |
| Receiver Short-Circuit Current | IOS | -165 | 165 | mA | EN = 1, 0V ≤ VO ≤ VCC | 5 | |
| Receiver Output High Voltage | VOH1 | 2.4 | V | 3.0V ≤ VCC ≤ 3.6V, IO = -6mA, VID = 200mV | 5 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | 3.0V ≤ VCC ≤ 5.5V, IO = 8mA, VID = -200mV | 5 | ||
| No Load Supply Current | ICC | 15 | mA | EN = 1, or EN = 0 | 5 | ||
| Shutdown Supply Current | ISHDN | 15 | µA | All outputs disabled (Note 12) | 5 | ||
| Maximum Data Rate | fMAX | 80 | Mbps | VID = ±1.5V, CL ≤ 15pF, VCC ≤ 3.6V | 5 | ||
| Maximum Data Rate | fMAX | 50 | Mbps | VID = ±1.5V, CL ≤ 15pF, VCC > 3.6V | 5 | ||
| Receiver Input to Output Delay | tPLH, tPHL | 6 | 11 | 16 | ns | 5 | |
| Receiver Skew / tPLH - tPHL / | tSKD | 0.4 | 2 | ns | 5 | ||
| Prop Delay Skew Channel-to-Channel | tSKC-C | 0.7 | 4 | ns | Figure 3, Note 7 | 5 | |
| Prop Delay Skew Part-to-Part | tSKP-P | 1.2 | 8 | ns | Figure 3, Note 8 | 5 | |
| Receiver Disable from Output High | tHZ | 18 | 30 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 4) | 5 | |
| Receiver Disable from Output Low | tLZ | 19 | 30 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 4) | 5 | |
| Receiver Enable from Shutdown to Output High | tZH(SHDN) | 850 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 4, Note 13) | 5 | ||
| Receiver Enable from Shutdown to Output Low | tZL(SHDN) | 850 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 4, Notes 13) | 5 | ||
| VCC to GND | VCC | 7 | V | 4 | |||
| Input Voltage EN | EN | -0.3 | 7 | V | All varieties | 4 | |
| Input Voltage A, B | A, B | -9 | 13 | V | 4 | ||
| Output Voltage RO | RO | -0.5 | V | Maximum is VCC + 0.3 | 4 | ||
| Maximum Junction Temperature | TJ | 150 | °C | Plastic Package | 4 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Supply Voltage | VCC | 3 | 5.5 | V | 4 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 4 | ||
| Bus Pin Common-Mode Voltage Range | VCM | -7 | 12 | V | 4 | ||
| RO Output Current | IO | -9 | 9 | mA | 4 | ||
| RO Load Capacitance | CL | 15 | pF | ≤15pF | 4 | ||
| Thermal Resistance Junction to Ambient | θJA | 70 | °C/W | 16 Ld SOIC Package (Notes 4, 5) | 4 | ||
| Thermal Resistance Junction to Case | θJC | 30 | °C/W | 16 Ld SOIC Package (Notes 4, 5) | 4 |
CAD (KiCad official)
- Symbol:
RAA7884QR4GSP#HB0 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
raa7884qr4gsp-hb0-etched.step/raa7884qr4gsp-hb0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa7884qr4gsp-hb0.step/raa7884qr4gsp-hb0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (13 pp, sha256
b92d2fce4f55f787, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).