main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers raa7881582gsp-ab0: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
raa7881582gsp-ab0-etched.glb Publish 0.1.0 · Ray
raa7881582gsp-ab0-etched.step raa7881582gsp-ab0: factory component page (tier=mfr) · Ray
raa7881582gsp-ab0-hero.glb raa7881582gsp-ab0: hero GLB from the etched model (keeps the MPN mark) · Ray
raa7881582gsp-ab0-hero.overlay.json Publish 0.1.0 · Ray
raa7881582gsp-ab0.glb Publish 0.1.0 · Ray
raa7881582gsp-ab0.kicad_mod Publish 0.1.0 · Ray
raa7881582gsp-ab0.kicad_sym Publish 0.1.0 · Ray
raa7881582gsp-ab0.lbr Publish 0.1.0 · Ray
raa7881582gsp-ab0.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

RAA7881582GSP#AB0

RENESAS · RS-485 / RS-422 ICs · SOIC-8

RAA7881582GSP#AB0 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: high if A-B ≥ -50mV, low if A-B ≤ -200mV, and fail-safe high if A and B are open or shorted.
2 RE input Receiver output enable: RO is enabled when RE is low and high impedance when RE is high.
3 DE input Driver output enable: driver outputs are enabled when DE is high and high impedance when DE is low.
4 DI input Driver input: low forces Y low and Z high, high forces Y high and Z low.
5 GND power_in Ground connection.
6 A/Y bidirectional Non-inverting receiver input and non-inverting driver output; input if DE = 0, output if DE = 1.
7 B/Z bidirectional Inverting receiver input and inverting driver output; input if DE = 0, output if DE = 1.
8 VCC power_in System power supply input, 4.5V to 5.5V.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC to Ground VCC 7 V 5
Input voltages at DI, DE, RE -0.3 V max printed as VCC + 0.3 5
Bus I/O voltages at A/Y, B/Z -9 13 V 5
Transient pulse voltages through 100Ω at A/Y, B/Z -100 100 V ±100V for 15µs at 1% duty cycle 5
RO voltage -0.3 V max printed as VCC + 0.3 5
Maximum junction temperature (plastic package) 150 °C 5
Storage temperature range -65 150 °C 5
Supply voltage VCC 4.5 5.5 V 5
Temperature range -40 85 °C 5
Bus pin common-mode voltage range -7 12 V 5
Thermal resistance, 8 Ld SOIC θJA 105 °C/W typical, high-effective thermal conductivity test board, free air 5
Driver differential output voltage (loaded) VOD2 2.8 3.6 V RL = 100Ω (RS-422), Full 6
Driver differential output voltage (loaded) VOD2 2.4 3.1 V RL = 54Ω (RS-485), Full; max printed as VCC 6
Driver differential output voltage (loaded) VOD2 1.65 V RL = 15Ω (eight 120Ω terminations), +25°C 6
Driver differential output voltage (loaded) VOD2 2.4 3 V RL = 60Ω, -7V ≤ VCM ≤ 12V, Full 6
Change in magnitude of driver differential output voltage ΔVOD 0.01 0.2 V RL = 54Ω or 100Ω, Full 6
Driver common-mode output voltage VOC 3.15 V RL = 54Ω or 100Ω, Full 6
Change in magnitude of driver common-mode output voltage ΔVOC 0.01 0.2 V RL = 54Ω or 100Ω, Full 6
Logic input high voltage VIH 2 V DE, DI, RE, Full 6
Logic input low voltage VIL 0.8 V DE, DI, RE, Full 6
DI input hysteresis voltage VHYS 100 mV +25°C 6
Logic input current IIN1 -2 2 µA DE, DI, RE, Full 6
Input current (A, B, A/Y, B/Z) IIN2 70 125 µA DE = 0V, VCC = 0V or 5.5V, VIN = 12V, Full 6
Input current (A, B, A/Y, B/Z) IIN2 -75 55 µA DE = 0V, VCC = 0V or 5.5V, VIN = -7V, Full 6
Driver short-circuit current, VO = high or low IOSD1 -250 250 mA DE = VCC, -7V ≤ VY or VZ ≤ 12V, Full 6
Receiver differential threshold voltage VTH -200 -90 -50 mV -7V ≤ VCM ≤ 12V, Full 6
Receiver input hysteresis ΔVTH 20 mV VCM = 0V, +25°C 6
Receiver output high voltage VOH 4.3 V IO = -8mA, VID = -50mV, Full; min printed as VCC - 1.2 6
Receiver output low voltage VOL 0.25 0.4 V IO = -8mA, VID = -200mV, Full 6
Receiver output low current IOL 20 28 mA VO = 1V, VID = -200mV, Full 6
Three-state receiver output current IOZR -1 0.03 1 µA 0.4V ≤ VO ≤ 2.4V, Full 7
Receiver input resistance RIN 96 160 kΩ -7V ≤ VCM ≤ 12V, Full 7
Receiver short-circuit current IOSR 7 65 85 mA 0V ≤ VO ≤ VCC, Full; min and max printed as ±7 and ±85 7
No-load supply current ICC 650 800 µA Half duplex versions, DE = VCC, RE = X, DI = 0V or VCC, Full 7
No-load supply current ICC 550 700 µA All versions, DE = 0V, RE = 0V, DI = 0V or VCC, Full 7
Shutdown supply current ISHDN 0.07 3 µA DE = 0V, RE = VCC, DI = 0V or VCC, Full 7
Driver differential output delay tPLH, tPHL 21 30 ns RDIFF = 54Ω, CL = 100pF, Full 8
Driver differential output skew tSKEW 0.2 3 ns RDIFF = 54Ω, CL = 100pF, Full 8
Driver differential rise or fall time tR, tF 12 16 ns RDIFF = 54Ω, CL = 100pF, Full 8
Driver maximum data rate fMAX 20 55 Mbps CD = 470pF, Full 8
Driver enable to output high tZH 30 45 ns RL = 500Ω, CL = 100pF, SW = GND, Full 8
Driver enable to output low tZL 28 45 ns RL = 500Ω, CL = 100pF, SW = VCC, Full 9
Driver disable from output low tLZ 50 65 ns RL = 500Ω, CL = 15pF, SW = VCC, Full 9
Driver disable from output high tHZ 38 60 ns RL = 500Ω, CL = 15pF, SW = GND, Full 9
Time to shutdown tSHDN 60 160 600 ns Full 9
Driver enable from shutdown to output high tZH(SHDN) 200 ns RL = 500Ω, CL = 100pF, SW = GND, Full 9
Driver enable from shutdown to output low tZL(SHDN) 200 ns RL = 500Ω, CL = 100pF, SW = VCC, Full 9
Receiver maximum data rate fMAX 20 30 Mbps Full 9
Receiver input to output delay tPLH, tPHL 33 45 ns Full 9
Receiver skew /tPLH - tPHL/ tSKD 2.5 5 ns Full 9
Receiver enable to output low tZL 8 15 ns RL = 1kΩ, CL = 15pF, SW = VCC, Full 9
Receiver enable to output high tZH 7 15 ns RL = 1kΩ, CL = 15pF, SW = GND, Full 9
Receiver disable from output low tLZ 8 15 ns RL = 1kΩ, CL = 15pF, SW = VCC, Full 9
Receiver disable from output high tHZ 8 15 ns RL = 1kΩ, CL = 15pF, SW = GND, Full 9
Receiver enable from shutdown to output high tZH(SHDN) 200 ns RL = 1kΩ, CL = 15pF, SW = GND, Full 10
Receiver enable from shutdown to output low tZL(SHDN) 200 ns RL = 1kΩ, CL = 15pF, SW = VCC, Full 10

CAD (KiCad official)

  • Symbol: RAA7881582GSP#AB0
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: raa7881582gsp-ab0-etched.step / raa7881582gsp-ab0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); raa7881582gsp-ab0.step / raa7881582gsp-ab0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (33 pp, sha256 108ae75d47993818, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF