3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRAA7881582GSP#AB0
RENESAS · RS-485 / RS-422 ICs · SOIC-8
RAA7881582GSP#AB0 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: high if A-B ≥ -50mV, low if A-B ≤ -200mV, and fail-safe high if A and B are open or shorted. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and high impedance when RE is high. |
| 3 | DE | input | Driver output enable: driver outputs are enabled when DE is high and high impedance when DE is low. |
| 4 | DI | input | Driver input: low forces Y low and Z high, high forces Y high and Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output; input if DE = 0, output if DE = 1. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output; input if DE = 0, output if DE = 1. |
| 8 | VCC | power_in | System power supply input, 4.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC to Ground | VCC | 7 | V | 5 | |||
| Input voltages at DI, DE, RE | -0.3 | V | max printed as VCC + 0.3 | 5 | |||
| Bus I/O voltages at A/Y, B/Z | -9 | 13 | V | 5 | |||
| Transient pulse voltages through 100Ω at A/Y, B/Z | -100 | 100 | V | ±100V for 15µs at 1% duty cycle | 5 | ||
| RO voltage | -0.3 | V | max printed as VCC + 0.3 | 5 | |||
| Maximum junction temperature (plastic package) | 150 | °C | 5 | ||||
| Storage temperature range | -65 | 150 | °C | 5 | |||
| Supply voltage | VCC | 4.5 | 5.5 | V | 5 | ||
| Temperature range | -40 | 85 | °C | 5 | |||
| Bus pin common-mode voltage range | -7 | 12 | V | 5 | |||
| Thermal resistance, 8 Ld SOIC | θJA | 105 | °C/W | typical, high-effective thermal conductivity test board, free air | 5 | ||
| Driver differential output voltage (loaded) | VOD2 | 2.8 | 3.6 | V | RL = 100Ω (RS-422), Full | 6 | |
| Driver differential output voltage (loaded) | VOD2 | 2.4 | 3.1 | V | RL = 54Ω (RS-485), Full; max printed as VCC | 6 | |
| Driver differential output voltage (loaded) | VOD2 | 1.65 | V | RL = 15Ω (eight 120Ω terminations), +25°C | 6 | ||
| Driver differential output voltage (loaded) | VOD2 | 2.4 | 3 | V | RL = 60Ω, -7V ≤ VCM ≤ 12V, Full | 6 | |
| Change in magnitude of driver differential output voltage | ΔVOD | 0.01 | 0.2 | V | RL = 54Ω or 100Ω, Full | 6 | |
| Driver common-mode output voltage | VOC | 3.15 | V | RL = 54Ω or 100Ω, Full | 6 | ||
| Change in magnitude of driver common-mode output voltage | ΔVOC | 0.01 | 0.2 | V | RL = 54Ω or 100Ω, Full | 6 | |
| Logic input high voltage | VIH | 2 | V | DE, DI, RE, Full | 6 | ||
| Logic input low voltage | VIL | 0.8 | V | DE, DI, RE, Full | 6 | ||
| DI input hysteresis voltage | VHYS | 100 | mV | +25°C | 6 | ||
| Logic input current | IIN1 | -2 | 2 | µA | DE, DI, RE, Full | 6 | |
| Input current (A, B, A/Y, B/Z) | IIN2 | 70 | 125 | µA | DE = 0V, VCC = 0V or 5.5V, VIN = 12V, Full | 6 | |
| Input current (A, B, A/Y, B/Z) | IIN2 | -75 | 55 | µA | DE = 0V, VCC = 0V or 5.5V, VIN = -7V, Full | 6 | |
| Driver short-circuit current, VO = high or low | IOSD1 | -250 | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V, Full | 6 | |
| Receiver differential threshold voltage | VTH | -200 | -90 | -50 | mV | -7V ≤ VCM ≤ 12V, Full | 6 |
| Receiver input hysteresis | ΔVTH | 20 | mV | VCM = 0V, +25°C | 6 | ||
| Receiver output high voltage | VOH | 4.3 | V | IO = -8mA, VID = -50mV, Full; min printed as VCC - 1.2 | 6 | ||
| Receiver output low voltage | VOL | 0.25 | 0.4 | V | IO = -8mA, VID = -200mV, Full | 6 | |
| Receiver output low current | IOL | 20 | 28 | mA | VO = 1V, VID = -200mV, Full | 6 | |
| Three-state receiver output current | IOZR | -1 | 0.03 | 1 | µA | 0.4V ≤ VO ≤ 2.4V, Full | 7 |
| Receiver input resistance | RIN | 96 | 160 | kΩ | -7V ≤ VCM ≤ 12V, Full | 7 | |
| Receiver short-circuit current | IOSR | 7 | 65 | 85 | mA | 0V ≤ VO ≤ VCC, Full; min and max printed as ±7 and ±85 | 7 |
| No-load supply current | ICC | 650 | 800 | µA | Half duplex versions, DE = VCC, RE = X, DI = 0V or VCC, Full | 7 | |
| No-load supply current | ICC | 550 | 700 | µA | All versions, DE = 0V, RE = 0V, DI = 0V or VCC, Full | 7 | |
| Shutdown supply current | ISHDN | 0.07 | 3 | µA | DE = 0V, RE = VCC, DI = 0V or VCC, Full | 7 | |
| Driver differential output delay | tPLH, tPHL | 21 | 30 | ns | RDIFF = 54Ω, CL = 100pF, Full | 8 | |
| Driver differential output skew | tSKEW | 0.2 | 3 | ns | RDIFF = 54Ω, CL = 100pF, Full | 8 | |
| Driver differential rise or fall time | tR, tF | 12 | 16 | ns | RDIFF = 54Ω, CL = 100pF, Full | 8 | |
| Driver maximum data rate | fMAX | 20 | 55 | Mbps | CD = 470pF, Full | 8 | |
| Driver enable to output high | tZH | 30 | 45 | ns | RL = 500Ω, CL = 100pF, SW = GND, Full | 8 | |
| Driver enable to output low | tZL | 28 | 45 | ns | RL = 500Ω, CL = 100pF, SW = VCC, Full | 9 | |
| Driver disable from output low | tLZ | 50 | 65 | ns | RL = 500Ω, CL = 15pF, SW = VCC, Full | 9 | |
| Driver disable from output high | tHZ | 38 | 60 | ns | RL = 500Ω, CL = 15pF, SW = GND, Full | 9 | |
| Time to shutdown | tSHDN | 60 | 160 | 600 | ns | Full | 9 |
| Driver enable from shutdown to output high | tZH(SHDN) | 200 | ns | RL = 500Ω, CL = 100pF, SW = GND, Full | 9 | ||
| Driver enable from shutdown to output low | tZL(SHDN) | 200 | ns | RL = 500Ω, CL = 100pF, SW = VCC, Full | 9 | ||
| Receiver maximum data rate | fMAX | 20 | 30 | Mbps | Full | 9 | |
| Receiver input to output delay | tPLH, tPHL | 33 | 45 | ns | Full | 9 | |
| Receiver skew /tPLH - tPHL/ | tSKD | 2.5 | 5 | ns | Full | 9 | |
| Receiver enable to output low | tZL | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = VCC, Full | 9 | |
| Receiver enable to output high | tZH | 7 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = GND, Full | 9 | |
| Receiver disable from output low | tLZ | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = VCC, Full | 9 | |
| Receiver disable from output high | tHZ | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = GND, Full | 9 | |
| Receiver enable from shutdown to output high | tZH(SHDN) | 200 | ns | RL = 1kΩ, CL = 15pF, SW = GND, Full | 10 | ||
| Receiver enable from shutdown to output low | tZL(SHDN) | 200 | ns | RL = 1kΩ, CL = 15pF, SW = VCC, Full | 10 |
CAD (KiCad official)
- Symbol:
RAA7881582GSP#AB0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
raa7881582gsp-ab0-etched.step/raa7881582gsp-ab0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa7881582gsp-ab0.step/raa7881582gsp-ab0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (33 pp, sha256
108ae75d47993818, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).