main
Ray Publish 0.1.0 ae16b1f
{
  "slug": "raa214023gnp-hca",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Linear Voltage Regulators (LDO), QFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "raa214023gnp#hca",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "raa214023gnp-hca.kicad_sym",
    "raa214023gnp-hca.kicad_mod",
    "raa214023gnp-hca.glb",
    "raa214023gnp-hca.step",
    "raa214023gnp-hca.lbr",
    "docs/hero.png",
    "docs/raa214023gnp-hca-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "raa214023gnp-hca-hero.glb",
    "raa214023gnp-hca-hero.overlay.json"
  ],
  "component": {
    "mpn": "RAA214023GNP#HCA",
    "manufacturer": "RENESAS",
    "package": "QFN-20(3.5x3.5)",
    "pin_count": 21,
    "category": "Power Management",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/650d257852d88b2421d876fe3a46838a.pdf",
    "parts": {
      "symbol": "raa214023gnp-hca.kicad_sym",
      "footprint": "raa214023gnp-hca.kicad_mod",
      "model_3d": "raa214023gnp-hca-hero.glb",
      "model_3d_plain": "raa214023gnp-hca.glb",
      "model_3d_step": "raa214023gnp-hca-etched.step",
      "model_3d_step_plain": "raa214023gnp-hca.step",
      "lbr": "raa214023gnp-hca.lbr"
    },
    "distributor_links": {
      "lcsc": "C7272776",
      "digikey": "20-RAA214023GNP#HCATR-ND",
      "mouser": "968-RAA214023GNP#HCA"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T04:29:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "20-RAA214023GNP#HCATR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-RAA214023GNP#HCA",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "power_out",
        "description": "VOUT is an output pin that supplies power to the load and requires a minimum 22µF capacitor from VOUT to GND for stable operation."
      },
      {
        "number": "2",
        "name": "SNS",
        "type": "input",
        "description": "SNS is the output voltage sense pin and should be connected to VOUT when the voltage set pins program the output, or left floating when external feedback resistors are used."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "FB is the voltage feedback pin, internally set to 0.8V (±1.75%) by the bandgap, and the divider on this pin sets the output voltage."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "PG is an open-drain power-good output that is open when VOUT is within 90% and 110% of target and pulls low on a fault, and it should use a 10kΩ to 100kΩ pull-up if used."
      },
      {
        "number": "5",
        "name": "50mV",
        "type": "input",
        "description": "50mV is a voltage set pin that adds 50mV to the output when grounded and may be grounded or left floating."
      },
      {
        "number": "6",
        "name": "100mV",
        "type": "input",
        "description": "100mV is a voltage set pin that adds 100mV to the output when grounded and may be grounded or left floating."
      },
      {
        "number": "7",
        "name": "200mV",
        "type": "input",
        "description": "200mV is a voltage set pin that adds 200mV to the output when grounded and may be grounded or left floating."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "GND is the ground pin that must be tied to ground and connected to the exposed pad."
      },
      {
        "number": "9",
        "name": "400mV",
        "type": "input",
        "description": "400mV is a voltage set pin that adds 400mV to the output when grounded and may be grounded or left floating."
      },
      {
        "number": "10",
        "name": "800mV",
        "type": "input",
        "description": "800mV is a voltage set pin that adds 800mV to the output when grounded and may be grounded or left floating."
      },
      {
        "number": "11",
        "name": "1.6V",
        "type": "input",
        "description": "1.6V is a voltage set pin that adds 1.6V to the output when grounded and may be grounded or left floating."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "NC is a no-connection pin that must be left floating."
      },
      {
        "number": "13",
        "name": "CSET",
        "type": "passive",
        "description": "CSET is the noise reduction pin that requires a 1µF capacitor to ground placed close to the device, and larger values increase start-up time."
      },
      {
        "number": "14",
        "name": "EN",
        "type": "input",
        "description": "EN is the enable pin, where low disables the LDO and high enables it, and it must not be left floating and should be tied to VIN for automatic enabling."
      },
      {
        "number": "15",
        "name": "VIN",
        "type": "power_in",
        "description": "VIN is an input pin that supplies power to the regulator within the 2.7V to 5.5V range and requires a minimum 10µF ceramic bypass capacitor."
      },
      {
        "number": "16",
        "name": "VIN",
        "type": "power_in",
        "description": "VIN is an input pin that supplies power to the regulator within the 2.7V to 5.5V range and requires a minimum 10µF ceramic bypass capacitor."
      },
      {
        "number": "17",
        "name": "VIN",
        "type": "power_in",
        "description": "VIN is an input pin that supplies power to the regulator within the 2.7V to 5.5V range and requires a minimum 10µF ceramic bypass capacitor."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "GND is the ground pin that must be tied to ground and connected to the exposed pad."
      },
      {
        "number": "19",
        "name": "VOUT",
        "type": "power_out",
        "description": "VOUT is an output pin that supplies power to the load and requires a minimum 22µF capacitor from VOUT to GND for stable operation."
      },
      {
        "number": "20",
        "name": "VOUT",
        "type": "power_out",
        "description": "VOUT is an output pin that supplies power to the load and requires a minimum 22µF capacitor from VOUT to GND for stable operation."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Pin Descriptions table (page 5) gives pin numbers and names for the 20-lead QFN without stating ; The exposed pad (EPAD) is not a numbered pin and is omitted from the pins list. Per page 5 it must b"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0249,
        "at": "2026-11-21T04:29:46"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/650d257852d88b2421d876fe3a46838a.pdf",
        "pages": 45,
        "sha256": "24afeeb3f892c331",
        "source_tier": "mfr",
        "citation": "RENESAS datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "raa214023gnp-hca.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "acd2eb88cd5251be3e9c8e9dacbe5ffa6ab0d080cef72073cc083cde17389b2a",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "raa214023gnp-hca-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "324aa358ecc54872a384cab4454b485c363b0ae6fcfdccb3e1c078e9d7142bec",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}