Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
RAA214020GNP#HD0
RENESAS · Linear Voltage Regulators (LDO) · DFN-10(3x3)
RAA214020GNP#HD0 from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin supplying the regulator; requires a minimum 10µF ceramic bypass capacitor (2.7V to 5.5V operating range). |
| 2 | VIN | power_in | Input voltage pin supplying the regulator; requires a minimum 10µF ceramic bypass capacitor (2.7V to 5.5V operating range). |
| 3 | EN | input | Enable pin: LOW disables the LDO, HIGH enables it; must not be left floating, tie to VIN for automatic enabling. |
| 4 | PG | output | Open-drain power-good output that is open when VOUT is within 90% to 110% of its final value and pulls LOW outside that range; use a 10kΩ-100kΩ pull-up, may be left floating if unused. |
| 5 | GND | power_in | Ground pin that must be tied to ground and connected to the exposed pad. |
| 6 | FB | input | Voltage feedback pin internally set to 0.9V (±1.5%), with an external divider setting the output voltage. |
| 7 | CSET | passive | Noise reduction pin; connect a 1µF capacitor to ground as close as possible for optimal noise and PSRR, larger values control start-up time. |
| 8 | GND | power_in | Ground pin that must be tied to ground and connected to the exposed pad. |
| 9 | VOUT | power_out | Output voltage pin supplying the load (up to 2A); requires a minimum 22µF capacitor from VOUT to GND for stability. |
| 10 | VOUT | power_out | Output voltage pin supplying the load (up to 2A); requires a minimum 22µF capacitor from VOUT to GND for stability. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.7 | 5.5 | V | 6 | ||
| Input Supply UVLO | VUVLO(IN) | 2.2 | 2.3 | 2.45 | V | VIN Rising | 6 |
| Input Supply UVLO Hysteresis | VHYS(IN) | 0.03 | 0.23 | 0.3 | V | 6 | |
| Output Current | IOUT | 2 | A | 6 | |||
| VIN Quiescent Current | IQ (VIN) | 50 | 195 | 300 | µA | VOUT = 3.3V, VIN = 5V | 6 |
| Shutdown Current | ISHDN | 200 | nA | VEN = 0V, TJ = +125°C | 6 | ||
| Output Voltage Range | VOUT | 0.9 | V | VIN = 2.7V to 5.5V; max VIN-VDO | 6 | ||
| FB voltage | VFB | 0.8865 | 0.9 | 0.9135 | V | 6 | |
| Output Voltage Accuracy (initial) | -1 | 1 | % | Initial at IOUT = 10mA, TJ = +25°C | 6 | ||
| Output Voltage Accuracy | -1.5 | 1.5 | % | Initial at IOUT = 10mA to 2A | 6 | ||
| Line Regulation | 0.1 | %/V | VIN = 2.7V to 5.5V, IOUT = 1mA | 6 | |||
| Load Regulation | 1 | mV | IOUT = 1mA to 2A | 6 | |||
| Dropout Voltage | VDO | 340 | 540 | mV | VIN = 3.3V, IOUT = 2A | 6 | |
| Internal Current Limit | ILIM | 3.3 | A | VIN = 2.7V to 5.5V, VOUT = 0V | 6 | ||
| Start-Up Time | 200 | µs | VIN = 5.5V, VOUT = 1.8V, IOUT = 2A, CSET = 1µF, COUT = 22μF | 6 | |||
| Thermal Shutdown | TSHDN | 155 | °C | Rising | 6 | ||
| Thermal Shutdown Hysteresis | 10 | °C | 6 | ||||
| Output Noise Spectral Density | 184 | nV/√(Hz) | IOUT = 2.0A, Frequency = 10Hz, COUT = 22μF, CSET = 1µF | 6 | |||
| Output Noise Spectral Density | 79 | nV/√(Hz) | IOUT = 2.0A, Frequency = 100Hz, COUT = 22μF, CSET = 1µF | 6 | |||
| Output Noise Spectral Density | 34 | nV/√(Hz) | IOUT = 2.0A, Frequency = 1kHz, COUT = 22μF, CSET = 1µF | 6 | |||
| Output Noise Spectral Density | 20 | nV/√(Hz) | IOUT = 2.0A, Frequency = 10kHz, COUT = 22μF, CSET = 1µF | 6 | |||
| Output RMS Noise | 6.3 | µV RMS | IOUT = 2.0A, Frequency = 10Hz to 100kHz, COUT = 22μF, CSET = 1µF | 6 | |||
| Supply Voltage | VIN | 2.7 | 5.5 | V | 5 | ||
| Ambient Temperature | -40 | 125 | °C | 5 | |||
| Output Voltage | 0.9 | V | max VIN-VDO | 5 | |||
| VIN, VOUT | 6.5 | V | 5 | ||||
| EN, PG, FB, CSET | 6.5 | V | 5 | ||||
| Maximum Junction Temperature | 150 | °C | 5 | ||||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| ESD Human Body Model | 3 | kV | Tested per JS-001-2017 | 5 | |||
| ESD Charged Device Model | 750 | V | Tested per JS-002-2014 | 5 | |||
| Latch-Up | 100 | mA | Tested per JESD78E; Class 2, Level A | 5 | |||
| Thermal Resistance Junction-Ambient | θJA | 32 | °C/W | 10 Ld 3x3 DFN Package | 5 | ||
| Thermal Resistance Junction-Case | θJC | 9 | °C/W | 10 Ld 3x3 DFN Package | 5 |
CAD (KiCad official)
- Symbol:
RAA214020GNP#HD0 - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
raa214020gnp-hd0-etched.step/raa214020gnp-hd0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa214020gnp-hd0.step/raa214020gnp-hd0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (46 pp, sha256
8ca27299130898e8, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).