Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RAA214020GNP#HD0

RENESAS · Linear Voltage Regulators (LDO) · DFN-10(3x3)

RAA214020GNP#HD0 from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage pin supplying the regulator; requires a minimum 10µF ceramic bypass capacitor (2.7V to 5.5V operating range).
2 VIN power_in Input voltage pin supplying the regulator; requires a minimum 10µF ceramic bypass capacitor (2.7V to 5.5V operating range).
3 EN input Enable pin: LOW disables the LDO, HIGH enables it; must not be left floating, tie to VIN for automatic enabling.
4 PG output Open-drain power-good output that is open when VOUT is within 90% to 110% of its final value and pulls LOW outside that range; use a 10kΩ-100kΩ pull-up, may be left floating if unused.
5 GND power_in Ground pin that must be tied to ground and connected to the exposed pad.
6 FB input Voltage feedback pin internally set to 0.9V (±1.5%), with an external divider setting the output voltage.
7 CSET passive Noise reduction pin; connect a 1µF capacitor to ground as close as possible for optimal noise and PSRR, larger values control start-up time.
8 GND power_in Ground pin that must be tied to ground and connected to the exposed pad.
9 VOUT power_out Output voltage pin supplying the load (up to 2A); requires a minimum 22µF capacitor from VOUT to GND for stability.
10 VOUT power_out Output voltage pin supplying the load (up to 2A); requires a minimum 22µF capacitor from VOUT to GND for stability.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package DFN-10(3x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 2.7 5.5 V 6
Input Supply UVLO VUVLO(IN) 2.2 2.3 2.45 V VIN Rising 6
Input Supply UVLO Hysteresis VHYS(IN) 0.03 0.23 0.3 V 6
Output Current IOUT 2 A 6
VIN Quiescent Current IQ (VIN) 50 195 300 µA VOUT = 3.3V, VIN = 5V 6
Shutdown Current ISHDN 200 nA VEN = 0V, TJ = +125°C 6
Output Voltage Range VOUT 0.9 V VIN = 2.7V to 5.5V; max VIN-VDO 6
FB voltage VFB 0.8865 0.9 0.9135 V 6
Output Voltage Accuracy (initial) -1 1 % Initial at IOUT = 10mA, TJ = +25°C 6
Output Voltage Accuracy -1.5 1.5 % Initial at IOUT = 10mA to 2A 6
Line Regulation 0.1 %/V VIN = 2.7V to 5.5V, IOUT = 1mA 6
Load Regulation 1 mV IOUT = 1mA to 2A 6
Dropout Voltage VDO 340 540 mV VIN = 3.3V, IOUT = 2A 6
Internal Current Limit ILIM 3.3 A VIN = 2.7V to 5.5V, VOUT = 0V 6
Start-Up Time 200 µs VIN = 5.5V, VOUT = 1.8V, IOUT = 2A, CSET = 1µF, COUT = 22μF 6
Thermal Shutdown TSHDN 155 °C Rising 6
Thermal Shutdown Hysteresis 10 °C 6
Output Noise Spectral Density 184 nV/√(Hz) IOUT = 2.0A, Frequency = 10Hz, COUT = 22μF, CSET = 1µF 6
Output Noise Spectral Density 79 nV/√(Hz) IOUT = 2.0A, Frequency = 100Hz, COUT = 22μF, CSET = 1µF 6
Output Noise Spectral Density 34 nV/√(Hz) IOUT = 2.0A, Frequency = 1kHz, COUT = 22μF, CSET = 1µF 6
Output Noise Spectral Density 20 nV/√(Hz) IOUT = 2.0A, Frequency = 10kHz, COUT = 22μF, CSET = 1µF 6
Output RMS Noise 6.3 µV RMS IOUT = 2.0A, Frequency = 10Hz to 100kHz, COUT = 22μF, CSET = 1µF 6
Supply Voltage VIN 2.7 5.5 V 5
Ambient Temperature -40 125 °C 5
Output Voltage 0.9 V max VIN-VDO 5
VIN, VOUT 6.5 V 5
EN, PG, FB, CSET 6.5 V 5
Maximum Junction Temperature 150 °C 5
Storage Temperature Range -65 150 °C 5
ESD Human Body Model 3 kV Tested per JS-001-2017 5
ESD Charged Device Model 750 V Tested per JS-002-2014 5
Latch-Up 100 mA Tested per JESD78E; Class 2, Level A 5
Thermal Resistance Junction-Ambient θJA 32 °C/W 10 Ld 3x3 DFN Package 5
Thermal Resistance Junction-Case θJC 9 °C/W 10 Ld 3x3 DFN Package 5

CAD (KiCad official)

  • Symbol: RAA214020GNP#HD0
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
  • 3D model files: raa214020gnp-hd0-etched.step / raa214020gnp-hd0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); raa214020gnp-hd0.step / raa214020gnp-hd0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (46 pp, sha256 8ca27299130898e8, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF