component
RAA2116054GP3#JA0
Public Made by Adomby adom
RENESAS ELECTRONICS AMERICA INC Global Sourcing Parts, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
RAA2116054GP3#JA0
RENESAS ELECTRONICS AMERICA INC · Global Sourcing Parts · TSOT-23-6
RAA2116054GP3#JA0 from RENESAS ELECTRONICS AMERICA INC, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | power_out | The bootstrap circuit supply pin, connected to SW through a capacitor (16V X7R 0.1µF recommended) to provide bias for the integrated MOSFET gate driver. |
| 2 | GND | power_in | Ground connection pin; all voltages are referenced to this pin. |
| 3 | FB | input | Feedback pin connected to the inverting input of the error amplifier, driven from a resistor divider from VOUT to ground that sets the output voltage down to 0.8V. |
| 4 | EN | input | Enable pin, high-voltage tolerant (-0.3V to 65V absolute maximum) so it can be connected directly to VIN. |
| 5 | VIN | power_in | Input supply pin connected to the drain of the integrated MOSFET and to the internal linear regulator that biases the IC, to be connected to the input rail (4.5V to 60V operating, -0.3V to 65V absolute maximum). |
| 6 | SW | output | Phase node of the regulator, connected to the source of the integrated MOSFET and to the inductor, diode and boot capacitor (-0.7V to VIN + 0.3V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS ELECTRONICS AMERICA INC |
| Package | TSOT-23-6 |
| Category | Global Sourcing Parts |
| Pins | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | ▪ If an aluminum electrolytic capacitor is used, place it as close as possible to the IC VIN pin. ▪ Keep the phase node copper area small for less parasitic capacitance but large enough to handle the | 14 |
CAD (KiCad official)
- Symbol:
RAA2116054GP3#JA0 - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
raa2116054gp3-ja0-etched.step/raa2116054gp3-ja0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa2116054gp3-ja0.step/raa2116054gp3-ja0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS ELECTRONICS AMERICA INC datasheet (17 pp, sha256
ae0a296e8f614cfd, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RAA2116054GP3#JA0
**RENESAS ELECTRONICS AMERICA INC** · Global Sourcing Parts · TSOT-23-6
RAA2116054GP3#JA0 from RENESAS ELECTRONICS AMERICA INC, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | power_out | The bootstrap circuit supply pin, connected to SW through a capacitor (16V X7R 0.1µF recommended) to provide bias for the integrated MOSFET gate driver. |
| 2 | GND | power_in | Ground connection pin; all voltages are referenced to this pin. |
| 3 | FB | input | Feedback pin connected to the inverting input of the error amplifier, driven from a resistor divider from VOUT to ground that sets the output voltage down to 0.8V. |
| 4 | EN | input | Enable pin, high-voltage tolerant (-0.3V to 65V absolute maximum) so it can be connected directly to VIN. |
| 5 | VIN | power_in | Input supply pin connected to the drain of the integrated MOSFET and to the internal linear regulator that biases the IC, to be connected to the input rail (4.5V to 60V operating, -0.3V to 65V absolute maximum). |
| 6 | SW | output | Phase node of the regulator, connected to the source of the integrated MOSFET and to the inductor, diode and boot capacitor (-0.7V to VIN + 0.3V absolute maximum). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS ELECTRONICS AMERICA INC |
| Package | TSOT-23-6 |
| Category | Global Sourcing Parts |
| Pins | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | ▪ If an aluminum electrolytic capacitor is used, place it as close as possible to the IC VIN pin. ▪ Keep the phase node copper area small for less parasitic capacitance but large enough to handle the | 14 |
## CAD (KiCad official)
- Symbol: `RAA2116054GP3#JA0`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `raa2116054gp3-ja0-etched.step` / `raa2116054gp3-ja0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `raa2116054gp3-ja0.step` / `raa2116054gp3-ja0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS ELECTRONICS AMERICA INC datasheet](docs/raa2116054gp3-ja0-datasheet.pdf) (17 pp, sha256 `ae0a296e8f614cfd`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/raa2116054gp3-ja0-datasheet.pdf)