main
Ray
Publish 0.1.1
3b41619
R7FA6M3AH3CFP#AA0
RENESAS · Pre-ordered MCUs · QFP-100(14x14)
R7FA6M3AH3CFP#AA0 from RENESAS, in a QFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P400 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ0, AGTIO1, GTIOC6A and AUDIO_CLK per the pin list. |
| 2 | P401 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ5-DS, GTETRGA, GTIOC6B and CTX0. |
| 3 | P402 | bidirectional | General-purpose I/O port; alternate functions include CACREF, IRQ4-DS, AGTIO0/AGTIO1, RTCIC0 and CRX0. |
| 4 | P403 | bidirectional | General-purpose I/O port; alternate functions include AGTIO0/AGTIO1, GTIOC3A, RTCIC1 and CTS7_RTS7/SS7. |
| 5 | P404 | bidirectional | General-purpose I/O port; alternate functions include GTIOC3B, RTCIC2 and SSILRCK0/SSIFS0_A. |
| 6 | P405 | bidirectional | General-purpose I/O port; alternate functions include GTIOC1A, SSITXD0_A, ET0_TX_EN and PIXD5. |
| 7 | P406 | bidirectional | General-purpose I/O port; alternate functions include GTIOC1B, SSLB3_C, SSIRXD0_A and ET0_RX_ER. |
| 8 | VBATT | power_in | Backup power pin for the battery backup area (RTC, sub-clock oscillator, backup registers); VBATT is specified at 1.65 to 3.6 V. |
| 9 | VCL0 | passive | Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL0 pin to stabilize the internal power supply. |
| 10 | XCIN | input | Input pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN. |
| 11 | XCOUT | output | Output pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN. |
| 12 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 13 | P213/XTAL | output | Crystal resonator output pin of the main clock oscillator (8 to 24 MHz); shares port P213 with IRQ2 and GTIOC0A. |
| 14 | P212/EXTAL | input | External clock input pin of the main clock oscillator (or crystal input); shares port P212 with IRQ3, AGTEE1 and GTIOC0B. |
| 15 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 16 | P708 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ11, RXD1/MISO1/SCL1, SSLA3_B and TS12. |
| 17 | P415 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ8, GTIOC0A, USB_VBUSEN and ET0_TX_EN. |
| 18 | P414 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ9, GTIOC0B, SSLA1_B and ET0_RX_ER. |
| 19 | P413 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include GTOUUP, CTS0_RTS0/SS0, SSLA0_B and ET0_ETXD1. |
| 20 | P412 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include AGTEE1, GTOULO, SCK0 and RSPCKA_B. |
| 21 | P411 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ4, AGTOA1, GTOVUP, GTIOC9A and TXD0/MOSI0/SDA0. |
| 22 | P410 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ5, AGTOB1, GTOVLO, GTIOC9B and RXD0/MISO0/SCL0. |
| 23 | P409 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN and TXD3/MOSI3/SDA3. |
| 24 | P408 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ7, GTOWLO, GTIOC10B, USBHS_ID and ET0_CRS. |
| 25 | P407 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include AGTIO0, RTCOUT, CTS4_RTS4/SS4 and ADTRG0. |
| 26 | VSS_USB | power_in | Ground pin for the USB (USBFS) transceiver; connect to the system ground (0 V). |
| 27 | USB_DM | bidirectional | D- I/O pin of the USBFS on-chip transceiver; connect to the D- pin of the USB bus. |
| 28 | USB_DP | bidirectional | D+ I/O pin of the USBFS on-chip transceiver; connect to the D+ pin of the USB bus. |
| 29 | VCC_USB | power_in | USB power supply pin; connect to VCC (Note 2, p.30). |
| 30 | P207 | bidirectional | General-purpose I/O port; alternate functions include A17, SSLB2_A/QSSL, TS02 and LCD_DATA23_B. |
| 31 | P206 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include WAIT, GTIU, USB_VBUSEN and ET0_LINKSTA. |
| 32 | P205 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include CLKOUT, IRQ1-DS, GTIV, GTIOC4A and USB_OVRCURA. |
| 33 | P214 | bidirectional | General-purpose I/O port; alternate functions include TCLK, GTIU, QSPCLK and ET0_MDC. |
| 34 | P211 | bidirectional | General-purpose I/O port; alternate functions include TDATA0, GTIV, QIO0 and ET0_MDIO. |
| 35 | P210 | bidirectional | General-purpose I/O port; alternate functions include TDATA1, GTIW, QIO1 and ET0_WOL. |
| 36 | P209 | bidirectional | General-purpose I/O port; alternate functions include TDATA2, GTOVUP, QIO2 and ET0_EXOUT. |
| 37 | P208 | bidirectional | General-purpose I/O port; alternate functions include TDATA3, GTOVLO, QIO3 and ET0_LINKSTA. |
| 38 | RES | input | Reset signal input; the MCU enters the reset state when this pin goes low. |
| 39 | P201/MD | input | Operating mode control pin (MD); its level must not change during operating mode transition on release from reset; shares port P201. |
| 40 | P200 | input | Input-only port P200, also the non-maskable interrupt request input (NMI). |
| 41 | P307 | bidirectional | General-purpose I/O port; alternate functions include A12, GTOUUP, CTS6 and QIO0. |
| 42 | P306 | bidirectional | General-purpose I/O port; alternate functions include A11, GTOULO, SCK6 and QSSL. |
| 43 | P305 | bidirectional | General-purpose I/O port; alternate functions include IRQ8, A10, GTOWUP and TXD6/MOSI6/SDA6. |
| 44 | P304 | bidirectional | General-purpose I/O port; alternate functions include IRQ9, A09, GTOWLO, GTIOC7A and RXD6/MISO6/SCL6. |
| 45 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 46 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 47 | P303 | bidirectional | General-purpose I/O port; alternate functions include A08, GTIOC7B and LCD_DATA15_A. |
| 48 | P302 | bidirectional | General-purpose I/O port; alternate functions include IRQ5, A07, GTOUUP, GTIOC4A and TXD2/MOSI2/SDA2. |
| 49 | P301 | bidirectional | General-purpose I/O port; alternate functions include AGTIO0, A06, GTOULO, GTIOC4B and RXD2/MISO2/SCL2. |
| 50 | P300/TCK/SWCLK | input | JTAG TCK / serial wire SWCLK clock input; shares port P300 (GTIOC0A_A, GTOUUP). |
| 51 | P108/TMS/SWDIO | bidirectional | JTAG TMS / serial wire SWDIO data input/output; shares port P108 (GTOULO, GTIOC0B_A). |
| 52 | P109/TDO/SWO | output | JTAG TDO / serial wire trace output (SWO); shares port P109 (CLKOUT, GTOVUP, GTIOC1A_A, CTX1). |
| 53 | P110/TDI | input | JTAG TDI data input; shares port P110 (IRQ3, GTOVLO, GTIOC1B_A, CRX1). |
| 54 | P111 | bidirectional | General-purpose I/O port; alternate functions include IRQ4, A05, GTIOC3A_A and SCK2. |
| 55 | P112 | bidirectional | General-purpose I/O port; alternate functions include A04, GTIOC3B_A, TXD2/MOSI2/SDA2 and SSIBCK0_B. |
| 56 | P113 | bidirectional | General-purpose I/O port; alternate functions include A03, GTIOC2A, RXD2/MISO2/SCL2 and SSILRCK0/SSIFS0_B. |
| 57 | P114 | bidirectional | General-purpose I/O port; alternate functions include A02, GTIOC2B and SSIRXD0_B. |
| 58 | P115 | bidirectional | General-purpose I/O port; alternate functions include A01, GTIOC4A and SSITXD0_B. |
| 59 | P608 | bidirectional | General-purpose I/O port; alternate functions include A00/BC0, GTIOC4B and LCD_DATA07_A. |
| 60 | P609 | bidirectional | General-purpose I/O port; alternate functions include CS1, CKE, GTIOC5A and CTX1. |
| 61 | P610 | bidirectional | General-purpose I/O port; alternate functions include CS0, WE, GTIOC5B and CRX1. |
| 62 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 63 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 64 | VCL | passive | Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL pin to stabilize the internal power supply. |
| 65 | P602 | bidirectional | General-purpose I/O port; alternate functions include EBCLK, SDCLK, GTIOC7B and TXD9. |
| 66 | P601 | bidirectional | General-purpose I/O port; alternate functions include WR/WR0, DQM0, GTIOC6A and RXD9. |
| 67 | P600 | bidirectional | General-purpose I/O port; alternate functions include RD, GTIOC6B, SCK9 and CLKOUT. |
| 68 | P107 | bidirectional | General-purpose I/O port; alternate functions include D07/A07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8 and KR07. |
| 69 | P106 | bidirectional | General-purpose I/O port; alternate functions include D06/A06, AGTOB0, GTIOC8B, SCK8 and KR06. |
| 70 | P105 | bidirectional | General-purpose I/O port; alternate functions include IRQ0/KR05, D05/A05, GTETRGA, GTIOC1A and TXD8/MOSI8/SDA8. |
| 71 | P104 | bidirectional | General-purpose I/O port; alternate functions include IRQ1/KR04, D04/A04, GTETRGB, GTIOC1B and RXD8/MISO8/SCL8. |
| 72 | P103 | bidirectional | General-purpose I/O port; alternate functions include KR03, D03/A03, GTOWUP, GTIOC2A_A and CTX0. |
| 73 | P102 | bidirectional | General-purpose I/O port; alternate functions include KR02, D02/A02, AGTO0, GTOWLO and CRX0. |
| 74 | P101 | bidirectional | General-purpose I/O port; alternate functions include IRQ1/KR01, D01/A01, AGTEE0, GTETRGB and GTIOC5A. |
| 75 | P100 | bidirectional | General-purpose I/O port; alternate functions include IRQ2/KR00, D00/A00, AGTIO0, GTETRGA and GTIOC5B. |
| 76 | P500 | bidirectional | General-purpose I/O port; alternate functions include AGTOA0, GTIU, GTIOC11A, QSPCLK and analog input AN016. |
| 77 | P501 | bidirectional | General-purpose I/O port; alternate functions include IRQ11, AGTOB0, GTIV, GTIOC11B and analog input AN116. |
| 78 | P502 | bidirectional | General-purpose I/O port; alternate functions include IRQ12, GTIW, GTIOC12A, QIO0 and analog input AN017. |
| 79 | P503 | bidirectional | General-purpose I/O port; alternate functions include GTETRGC, GTIOC12B, CTS6_RTS6/SS6 and analog input AN117. |
| 80 | P504 | bidirectional | General-purpose I/O port; alternate functions include ALE, GTETRGD, GTIOC13A, SCK6 and analog input AN018. |
| 81 | P508 | bidirectional | General-purpose I/O port; alternate functions include SCK6, SCK5 and analog input AN020. |
| 82 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 83 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 84 | P015 | bidirectional | General-purpose I/O port (IRQ13); analog input AN006/AN106 and D/A output DA1 or comparator input IVCMP1 per the pin list. |
| 85 | P014 | bidirectional | General-purpose I/O port; analog input AN005/AN105 and D/A output DA0 or comparator reference IVREF3 per the pin list. |
| 86 | VREFL | power_in | Analog reference ground for the ADC12 unit 1 and D/A converter; connect to VSS when these are not used. |
| 87 | VREFH | power_in | Analog reference voltage supply for the ADC12 unit 1 and D/A converter; connect to VCC when these are not used. |
| 88 | AVCC0 | power_in | Analog power supply for the ADC12, comparator and PGA; supply at the same voltage as VCC (Note 2, p.30). |
| 89 | AVSS0 | power_in | Analog ground for the ADC12, comparator and PGA; supply at the same voltage as VSS. |
| 90 | VREFL0 | power_in | Analog reference ground for the ADC12 unit 0; connect to VSS when the ADC12 unit 0 is not used. |
| 91 | VREFH0 | power_in | Analog reference voltage supply for the ADC12 unit 0, with 2.7 V <= VREFH0 <= AVCC0; connect to VCC when not used. |
| 92 | P008 | bidirectional | General-purpose I/O port; alternate functions include IRQ12-DS and analog input AN003. |
| 93 | P007 | input | Input-only general-purpose port; the pin is also PGAVSS100/AN107 for the PGA differential input. |
| 94 | P006 | input | Input-only general-purpose port; alternate functions include IRQ11-DS, analog input AN102 and comparator input IVCMP2. |
| 95 | P005 | input | Input-only general-purpose port; alternate functions include IRQ10-DS, analog input AN101 and comparator input IVCMP2. |
| 96 | P004 | input | Input-only general-purpose port; alternate functions include IRQ9-DS, analog input AN100 and comparator input IVCMP2. |
| 97 | P003 | input | Input-only general-purpose port; the pin is also PGAVSS000/AN007 for the PGA differential input. |
| 98 | P002 | input | Input-only general-purpose port; alternate functions include IRQ8-DS, analog input AN002 and comparator input IVCMP2. |
| 99 | P001 | input | Input-only general-purpose port; alternate functions include IRQ7-DS, analog input AN001 and comparator input IVCMP2. |
| 100 | P000 | input | Input-only general-purpose port; alternate functions include IRQ6-DS, analog input AN000 and comparator input IVCMP2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 4 | V | VCC, VCC_USB (Table 2.1) | 29 | |
| VBATT power supply voltage | VBATT | -0.3 | 4 | V | 29 | ||
| Input voltage (except 5 V-tolerant ports) | Vin | -0.3 | V | Maximum printed as VCC + 0.3 V (not a fixed number) | 29 | ||
| Input voltage (5 V-tolerant ports) | Vin | -0.3 | 5.8 | V | Printed as VCC + 4.0 (max 5.8) | 29 | |
| Power supply voltage (USB/SDRAM not used) | VCC | 2.7 | 3.6 | V | When USB/SDRAM is not used | 30 | |
| Power supply voltage (USB/SDRAM used) | VCC | 3 | 3.6 | V | When USB/SDRAM is used | 30 | |
| VBATT power supply voltage | VBATT | 1.65 | 3.6 | V | Low CL crystal cannot be used below VBATT = 1.8 V (note 2) | 30 | |
| Permissible junction temperature | Tj | 125 | °C | High-speed mode, Low-speed mode | 30 | ||
| Input leakage current RES | /Iin/ | -5 | μA | Vin = 0 V and Vin = 5.5 V (printed as -5.0; sign as printed) | 33 | ||
| Input pull-up MOS current | Ip | -300 | -10 | μA | VCC = 2.7 to 3.6 V, Vin = 0 V | 33 | |
| Input capacitance (other input pins) | Cin | 8 | pF | Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C | 33 | ||
| Output voltage (other output pins) | VOL | 0.5 | V | IOL = 1.0 mA | 33 | ||
| Permissible output current, average per pin (other output pins, low drive) | IOH | -2 | mA | Low drive, other output pins, average value per pin | 32 | ||
| Permissible output current, average per pin (other output pins, low drive) | IOL | 2 | mA | Low drive, other output pins, average value per pin | 32 | ||
| Permissible output current, average per pin (other output pins, middle drive) | IOH | -4 | mA | Middle drive, other output pins, average value per pin | 32 | ||
| Permissible output current, average per pin (other output pins, middle drive) | IOL | 4 | mA | Middle drive, other output pins, average value per pin | 32 | ||
| Permissible output current, average per pin (other output pins, high drive) | IOH | -16 | mA | High drive, other output pins, average value per pin | 32 | ||
| Permissible output current, average per pin (other output pins, high drive) | IOL | 16 | mA | High drive, other output pins, average value per pin | 32 | ||
| Permissible output current, total pins | ΣIOH(max) | -80 | mA | Maximum of all output pins | 32 | ||
| Permissible output current, total pins | ΣIOL(max) | 80 | mA | Maximum of all output pins | 32 | ||
| Supply current, maximum | ICC | 137 | mA | High-speed mode maximum, ICLK = 120 MHz, BCLK = 120 MHz | 34 | ||
| Deep Software Standby current, standby SRAM powered | ICC | 30 | 113 | μA | Power supplied to Standby SRAM and USB resume detecting unit, Ta ≤ 105 °C | 34 | |
| Analog supply current during 12-bit A/D conversion | AICC | 0.8 | 1.1 | mA | During 12-bit A/D conversion | 34 | |
| Analog supply current during 12-bit A/D conversion with S/H amp | AICC | 2.3 | 3.3 | mA | During 12-bit A/D conversion with S/H amp | 34 | |
| PGA analog supply current | AICC | 1 | 3 | mA | PGA (1ch) | 34 | |
| D/A conversion analog supply current (with AMP output) | AICC | 0.6 | 1.1 | mA | During D/A conversion (per unit), with AMP output | 34 | |
| ADC12, DAC12 standby current (all units) | AICC | 2 | 8 | μA | ADC12, DAC12 in standby modes (all units) | 34 | |
| D/A conversion analog supply current (without AMP output) | AICC | 0.1 | 0.2 | mA | During D/A conversion (per unit), without AMP output | 34 | |
| VCC rising gradient (voltage monitor 0 reset disabled at startup) | SrVCC | 0.0084 | 20 | ms/V | Voltage monitor 0 reset disabled at startup | 38 | |
| VCC falling gradient | SfVCC | 0.0084 | ms/V | 38 | |||
| Allowable voltage change rising and falling gradient | dt/dVCC | 1 | ms/V | When VCC change exceeds VCC ±10% | 38 | ||
| Allowable ripple frequency | fr(VCC) | 10 | kHz | Figure 2.6 | 38 | ||
| System clock (ICLK) operation frequency, high-speed mode | f | 120 | MHz | High-speed mode | 38 | ||
| Peripheral module clock (PCLKA), high-speed mode | 120 | MHz | High-speed mode | 38 | |||
| Peripheral module clock (PCLKB), high-speed mode | 60 | MHz | High-speed mode | 38 | |||
| Peripheral module clock (PCLKC), high-speed mode | 60 | MHz | High-speed mode; ADC12 use requires at least 1 MHz | 38 | |||
| Peripheral module clock (PCLKD), high-speed mode | 120 | MHz | High-speed mode | 38 | |||
| Flash interface clock (FCLK), high-speed mode | 60 | MHz | High-speed mode | 38 | |||
| External bus clock (BCLK), high-speed mode | 120 | MHz | High-speed mode | 38 | |||
| Main clock oscillator frequency | fMAIN | 8 | 24 | MHz | 40 | ||
| PLL clock frequency | fPLL | 120 | 240 | MHz | 40 | ||
| HOCO oscillation frequency fHOCO16 (without FLL) | fHOCO16 | 15.78 | 16 | 16.22 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |
| HOCO oscillation frequency fHOCO18 (without FLL) | fHOCO18 | 17.75 | 18 | 18.25 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |
| HOCO oscillation frequency fHOCO20 (without FLL) | fHOCO20 | 19.72 | 20 | 20.28 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |
| LOCO clock oscillation frequency | fLOCO | 27.8528 | 32.768 | 37.6832 | kHz | 40 | |
| MOCO clock oscillation frequency | FMOCO | 6.8 | 8 | 9.2 | MHz | 40 | |
| RES pulse width, power-on | tRESWP | 1 | ms | Power-on, Figure 2.13 | 43 | ||
| Recovery time from Deep Software Standby mode | tDSBY | 0.65 | 1 | ms | Figure 2.16 | 43 | |
| I/O port input data pulse width | tPRW | 1.5 | tPcyc | Figure 2.34 | 61 | ||
| SCI receive data setup time (clock synchronous) | tRXS | 15 | ns | Clock synchronous mode, Figure 2.44 | 64 | ||
| SCI receive data hold time (clock synchronous) | tRXH | 5 | ns | Clock synchronous mode, Figure 2.44 | 64 | ||
| SPI simple mode data input setup time | tSU | 33.3 | ns | Simple SPI mode, Figure 2.46 to 2.49 | 65 | ||
| SPI simple mode data input hold time | tH | 33.3 | ns | Simple SPI mode, Figure 2.46 to 2.49 | 65 | ||
| System supply voltage (digital ground) | VSS | 0 | V | 30 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminal material (Pb-free) A: Sn (Tin) only | 10 |
CAD (KiCad official)
- Symbol:
R7FA6M3AH3CFP#AA0 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: QFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
r7fa6m3ah3cfp-aa0-etched.step/r7fa6m3ah3cfp-aa0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r7fa6m3ah3cfp-aa0.step/r7fa6m3ah3cfp-aa0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (115 pp, sha256
61df63b02547f21b, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R7FA6M3AH3CFP#AA0
**RENESAS** · Pre-ordered MCUs · QFP-100(14x14)
R7FA6M3AH3CFP#AA0 from RENESAS, in a QFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P400 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ0, AGTIO1, GTIOC6A and AUDIO_CLK per the pin list. |
| 2 | P401 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ5-DS, GTETRGA, GTIOC6B and CTX0. |
| 3 | P402 | bidirectional | General-purpose I/O port; alternate functions include CACREF, IRQ4-DS, AGTIO0/AGTIO1, RTCIC0 and CRX0. |
| 4 | P403 | bidirectional | General-purpose I/O port; alternate functions include AGTIO0/AGTIO1, GTIOC3A, RTCIC1 and CTS7_RTS7/SS7. |
| 5 | P404 | bidirectional | General-purpose I/O port; alternate functions include GTIOC3B, RTCIC2 and SSILRCK0/SSIFS0_A. |
| 6 | P405 | bidirectional | General-purpose I/O port; alternate functions include GTIOC1A, SSITXD0_A, ET0_TX_EN and PIXD5. |
| 7 | P406 | bidirectional | General-purpose I/O port; alternate functions include GTIOC1B, SSLB3_C, SSIRXD0_A and ET0_RX_ER. |
| 8 | VBATT | power_in | Backup power pin for the battery backup area (RTC, sub-clock oscillator, backup registers); VBATT is specified at 1.65 to 3.6 V. |
| 9 | VCL0 | passive | Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL0 pin to stabilize the internal power supply. |
| 10 | XCIN | input | Input pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN. |
| 11 | XCOUT | output | Output pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN. |
| 12 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 13 | P213/XTAL | output | Crystal resonator output pin of the main clock oscillator (8 to 24 MHz); shares port P213 with IRQ2 and GTIOC0A. |
| 14 | P212/EXTAL | input | External clock input pin of the main clock oscillator (or crystal input); shares port P212 with IRQ3, AGTEE1 and GTIOC0B. |
| 15 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 16 | P708 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ11, RXD1/MISO1/SCL1, SSLA3_B and TS12. |
| 17 | P415 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ8, GTIOC0A, USB_VBUSEN and ET0_TX_EN. |
| 18 | P414 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ9, GTIOC0B, SSLA1_B and ET0_RX_ER. |
| 19 | P413 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include GTOUUP, CTS0_RTS0/SS0, SSLA0_B and ET0_ETXD1. |
| 20 | P412 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include AGTEE1, GTOULO, SCK0 and RSPCKA_B. |
| 21 | P411 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ4, AGTOA1, GTOVUP, GTIOC9A and TXD0/MOSI0/SDA0. |
| 22 | P410 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ5, AGTOB1, GTOVLO, GTIOC9B and RXD0/MISO0/SCL0. |
| 23 | P409 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN and TXD3/MOSI3/SDA3. |
| 24 | P408 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ7, GTOWLO, GTIOC10B, USBHS_ID and ET0_CRS. |
| 25 | P407 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include AGTIO0, RTCOUT, CTS4_RTS4/SS4 and ADTRG0. |
| 26 | VSS_USB | power_in | Ground pin for the USB (USBFS) transceiver; connect to the system ground (0 V). |
| 27 | USB_DM | bidirectional | D- I/O pin of the USBFS on-chip transceiver; connect to the D- pin of the USB bus. |
| 28 | USB_DP | bidirectional | D+ I/O pin of the USBFS on-chip transceiver; connect to the D+ pin of the USB bus. |
| 29 | VCC_USB | power_in | USB power supply pin; connect to VCC (Note 2, p.30). |
| 30 | P207 | bidirectional | General-purpose I/O port; alternate functions include A17, SSLB2_A/QSSL, TS02 and LCD_DATA23_B. |
| 31 | P206 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include WAIT, GTIU, USB_VBUSEN and ET0_LINKSTA. |
| 32 | P205 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include CLKOUT, IRQ1-DS, GTIV, GTIOC4A and USB_OVRCURA. |
| 33 | P214 | bidirectional | General-purpose I/O port; alternate functions include TCLK, GTIU, QSPCLK and ET0_MDC. |
| 34 | P211 | bidirectional | General-purpose I/O port; alternate functions include TDATA0, GTIV, QIO0 and ET0_MDIO. |
| 35 | P210 | bidirectional | General-purpose I/O port; alternate functions include TDATA1, GTIW, QIO1 and ET0_WOL. |
| 36 | P209 | bidirectional | General-purpose I/O port; alternate functions include TDATA2, GTOVUP, QIO2 and ET0_EXOUT. |
| 37 | P208 | bidirectional | General-purpose I/O port; alternate functions include TDATA3, GTOVLO, QIO3 and ET0_LINKSTA. |
| 38 | RES | input | Reset signal input; the MCU enters the reset state when this pin goes low. |
| 39 | P201/MD | input | Operating mode control pin (MD); its level must not change during operating mode transition on release from reset; shares port P201. |
| 40 | P200 | input | Input-only port P200, also the non-maskable interrupt request input (NMI). |
| 41 | P307 | bidirectional | General-purpose I/O port; alternate functions include A12, GTOUUP, CTS6 and QIO0. |
| 42 | P306 | bidirectional | General-purpose I/O port; alternate functions include A11, GTOULO, SCK6 and QSSL. |
| 43 | P305 | bidirectional | General-purpose I/O port; alternate functions include IRQ8, A10, GTOWUP and TXD6/MOSI6/SDA6. |
| 44 | P304 | bidirectional | General-purpose I/O port; alternate functions include IRQ9, A09, GTOWLO, GTIOC7A and RXD6/MISO6/SCL6. |
| 45 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 46 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 47 | P303 | bidirectional | General-purpose I/O port; alternate functions include A08, GTIOC7B and LCD_DATA15_A. |
| 48 | P302 | bidirectional | General-purpose I/O port; alternate functions include IRQ5, A07, GTOUUP, GTIOC4A and TXD2/MOSI2/SDA2. |
| 49 | P301 | bidirectional | General-purpose I/O port; alternate functions include AGTIO0, A06, GTOULO, GTIOC4B and RXD2/MISO2/SCL2. |
| 50 | P300/TCK/SWCLK | input | JTAG TCK / serial wire SWCLK clock input; shares port P300 (GTIOC0A_A, GTOUUP). |
| 51 | P108/TMS/SWDIO | bidirectional | JTAG TMS / serial wire SWDIO data input/output; shares port P108 (GTOULO, GTIOC0B_A). |
| 52 | P109/TDO/SWO | output | JTAG TDO / serial wire trace output (SWO); shares port P109 (CLKOUT, GTOVUP, GTIOC1A_A, CTX1). |
| 53 | P110/TDI | input | JTAG TDI data input; shares port P110 (IRQ3, GTOVLO, GTIOC1B_A, CRX1). |
| 54 | P111 | bidirectional | General-purpose I/O port; alternate functions include IRQ4, A05, GTIOC3A_A and SCK2. |
| 55 | P112 | bidirectional | General-purpose I/O port; alternate functions include A04, GTIOC3B_A, TXD2/MOSI2/SDA2 and SSIBCK0_B. |
| 56 | P113 | bidirectional | General-purpose I/O port; alternate functions include A03, GTIOC2A, RXD2/MISO2/SCL2 and SSILRCK0/SSIFS0_B. |
| 57 | P114 | bidirectional | General-purpose I/O port; alternate functions include A02, GTIOC2B and SSIRXD0_B. |
| 58 | P115 | bidirectional | General-purpose I/O port; alternate functions include A01, GTIOC4A and SSITXD0_B. |
| 59 | P608 | bidirectional | General-purpose I/O port; alternate functions include A00/BC0, GTIOC4B and LCD_DATA07_A. |
| 60 | P609 | bidirectional | General-purpose I/O port; alternate functions include CS1, CKE, GTIOC5A and CTX1. |
| 61 | P610 | bidirectional | General-purpose I/O port; alternate functions include CS0, WE, GTIOC5B and CRX1. |
| 62 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 63 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 64 | VCL | passive | Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL pin to stabilize the internal power supply. |
| 65 | P602 | bidirectional | General-purpose I/O port; alternate functions include EBCLK, SDCLK, GTIOC7B and TXD9. |
| 66 | P601 | bidirectional | General-purpose I/O port; alternate functions include WR/WR0, DQM0, GTIOC6A and RXD9. |
| 67 | P600 | bidirectional | General-purpose I/O port; alternate functions include RD, GTIOC6B, SCK9 and CLKOUT. |
| 68 | P107 | bidirectional | General-purpose I/O port; alternate functions include D07/A07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8 and KR07. |
| 69 | P106 | bidirectional | General-purpose I/O port; alternate functions include D06/A06, AGTOB0, GTIOC8B, SCK8 and KR06. |
| 70 | P105 | bidirectional | General-purpose I/O port; alternate functions include IRQ0/KR05, D05/A05, GTETRGA, GTIOC1A and TXD8/MOSI8/SDA8. |
| 71 | P104 | bidirectional | General-purpose I/O port; alternate functions include IRQ1/KR04, D04/A04, GTETRGB, GTIOC1B and RXD8/MISO8/SCL8. |
| 72 | P103 | bidirectional | General-purpose I/O port; alternate functions include KR03, D03/A03, GTOWUP, GTIOC2A_A and CTX0. |
| 73 | P102 | bidirectional | General-purpose I/O port; alternate functions include KR02, D02/A02, AGTO0, GTOWLO and CRX0. |
| 74 | P101 | bidirectional | General-purpose I/O port; alternate functions include IRQ1/KR01, D01/A01, AGTEE0, GTETRGB and GTIOC5A. |
| 75 | P100 | bidirectional | General-purpose I/O port; alternate functions include IRQ2/KR00, D00/A00, AGTIO0, GTETRGA and GTIOC5B. |
| 76 | P500 | bidirectional | General-purpose I/O port; alternate functions include AGTOA0, GTIU, GTIOC11A, QSPCLK and analog input AN016. |
| 77 | P501 | bidirectional | General-purpose I/O port; alternate functions include IRQ11, AGTOB0, GTIV, GTIOC11B and analog input AN116. |
| 78 | P502 | bidirectional | General-purpose I/O port; alternate functions include IRQ12, GTIW, GTIOC12A, QIO0 and analog input AN017. |
| 79 | P503 | bidirectional | General-purpose I/O port; alternate functions include GTETRGC, GTIOC12B, CTS6_RTS6/SS6 and analog input AN117. |
| 80 | P504 | bidirectional | General-purpose I/O port; alternate functions include ALE, GTETRGD, GTIOC13A, SCK6 and analog input AN018. |
| 81 | P508 | bidirectional | General-purpose I/O port; alternate functions include SCK6, SCK5 and analog input AN020. |
| 82 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |
| 83 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 84 | P015 | bidirectional | General-purpose I/O port (IRQ13); analog input AN006/AN106 and D/A output DA1 or comparator input IVCMP1 per the pin list. |
| 85 | P014 | bidirectional | General-purpose I/O port; analog input AN005/AN105 and D/A output DA0 or comparator reference IVREF3 per the pin list. |
| 86 | VREFL | power_in | Analog reference ground for the ADC12 unit 1 and D/A converter; connect to VSS when these are not used. |
| 87 | VREFH | power_in | Analog reference voltage supply for the ADC12 unit 1 and D/A converter; connect to VCC when these are not used. |
| 88 | AVCC0 | power_in | Analog power supply for the ADC12, comparator and PGA; supply at the same voltage as VCC (Note 2, p.30). |
| 89 | AVSS0 | power_in | Analog ground for the ADC12, comparator and PGA; supply at the same voltage as VSS. |
| 90 | VREFL0 | power_in | Analog reference ground for the ADC12 unit 0; connect to VSS when the ADC12 unit 0 is not used. |
| 91 | VREFH0 | power_in | Analog reference voltage supply for the ADC12 unit 0, with 2.7 V <= VREFH0 <= AVCC0; connect to VCC when not used. |
| 92 | P008 | bidirectional | General-purpose I/O port; alternate functions include IRQ12-DS and analog input AN003. |
| 93 | P007 | input | Input-only general-purpose port; the pin is also PGAVSS100/AN107 for the PGA differential input. |
| 94 | P006 | input | Input-only general-purpose port; alternate functions include IRQ11-DS, analog input AN102 and comparator input IVCMP2. |
| 95 | P005 | input | Input-only general-purpose port; alternate functions include IRQ10-DS, analog input AN101 and comparator input IVCMP2. |
| 96 | P004 | input | Input-only general-purpose port; alternate functions include IRQ9-DS, analog input AN100 and comparator input IVCMP2. |
| 97 | P003 | input | Input-only general-purpose port; the pin is also PGAVSS000/AN007 for the PGA differential input. |
| 98 | P002 | input | Input-only general-purpose port; alternate functions include IRQ8-DS, analog input AN002 and comparator input IVCMP2. |
| 99 | P001 | input | Input-only general-purpose port; alternate functions include IRQ7-DS, analog input AN001 and comparator input IVCMP2. |
| 100 | P000 | input | Input-only general-purpose port; alternate functions include IRQ6-DS, analog input AN000 and comparator input IVCMP2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | | 4 | V | VCC, VCC_USB (Table 2.1) | 29 |
| VBATT power supply voltage | VBATT | -0.3 | | 4 | V | | 29 |
| Input voltage (except 5 V-tolerant ports) | Vin | -0.3 | | | V | Maximum printed as VCC + 0.3 V (not a fixed number) | 29 |
| Input voltage (5 V-tolerant ports) | Vin | -0.3 | | 5.8 | V | Printed as VCC + 4.0 (max 5.8) | 29 |
| Power supply voltage (USB/SDRAM not used) | VCC | 2.7 | | 3.6 | V | When USB/SDRAM is not used | 30 |
| Power supply voltage (USB/SDRAM used) | VCC | 3 | | 3.6 | V | When USB/SDRAM is used | 30 |
| VBATT power supply voltage | VBATT | 1.65 | | 3.6 | V | Low CL crystal cannot be used below VBATT = 1.8 V (note 2) | 30 |
| Permissible junction temperature | Tj | | | 125 | °C | High-speed mode, Low-speed mode | 30 |
| Input leakage current RES | /Iin/ | | | -5 | μA | Vin = 0 V and Vin = 5.5 V (printed as -5.0; sign as printed) | 33 |
| Input pull-up MOS current | Ip | -300 | | -10 | μA | VCC = 2.7 to 3.6 V, Vin = 0 V | 33 |
| Input capacitance (other input pins) | Cin | | | 8 | pF | Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C | 33 |
| Output voltage (other output pins) | VOL | | | 0.5 | V | IOL = 1.0 mA | 33 |
| Permissible output current, average per pin (other output pins, low drive) | IOH | | | -2 | mA | Low drive, other output pins, average value per pin | 32 |
| Permissible output current, average per pin (other output pins, low drive) | IOL | | | 2 | mA | Low drive, other output pins, average value per pin | 32 |
| Permissible output current, average per pin (other output pins, middle drive) | IOH | | | -4 | mA | Middle drive, other output pins, average value per pin | 32 |
| Permissible output current, average per pin (other output pins, middle drive) | IOL | | | 4 | mA | Middle drive, other output pins, average value per pin | 32 |
| Permissible output current, average per pin (other output pins, high drive) | IOH | | | -16 | mA | High drive, other output pins, average value per pin | 32 |
| Permissible output current, average per pin (other output pins, high drive) | IOL | | | 16 | mA | High drive, other output pins, average value per pin | 32 |
| Permissible output current, total pins | ΣIOH(max) | | | -80 | mA | Maximum of all output pins | 32 |
| Permissible output current, total pins | ΣIOL(max) | | | 80 | mA | Maximum of all output pins | 32 |
| Supply current, maximum | ICC | | | 137 | mA | High-speed mode maximum, ICLK = 120 MHz, BCLK = 120 MHz | 34 |
| Deep Software Standby current, standby SRAM powered | ICC | | 30 | 113 | μA | Power supplied to Standby SRAM and USB resume detecting unit, Ta ≤ 105 °C | 34 |
| Analog supply current during 12-bit A/D conversion | AICC | | 0.8 | 1.1 | mA | During 12-bit A/D conversion | 34 |
| Analog supply current during 12-bit A/D conversion with S/H amp | AICC | | 2.3 | 3.3 | mA | During 12-bit A/D conversion with S/H amp | 34 |
| PGA analog supply current | AICC | | 1 | 3 | mA | PGA (1ch) | 34 |
| D/A conversion analog supply current (with AMP output) | AICC | | 0.6 | 1.1 | mA | During D/A conversion (per unit), with AMP output | 34 |
| ADC12, DAC12 standby current (all units) | AICC | | 2 | 8 | μA | ADC12, DAC12 in standby modes (all units) | 34 |
| D/A conversion analog supply current (without AMP output) | AICC | | 0.1 | 0.2 | mA | During D/A conversion (per unit), without AMP output | 34 |
| VCC rising gradient (voltage monitor 0 reset disabled at startup) | SrVCC | 0.0084 | | 20 | ms/V | Voltage monitor 0 reset disabled at startup | 38 |
| VCC falling gradient | SfVCC | 0.0084 | | | ms/V | | 38 |
| Allowable voltage change rising and falling gradient | dt/dVCC | 1 | | | ms/V | When VCC change exceeds VCC ±10% | 38 |
| Allowable ripple frequency | fr(VCC) | | | 10 | kHz | Figure 2.6 | 38 |
| System clock (ICLK) operation frequency, high-speed mode | f | | | 120 | MHz | High-speed mode | 38 |
| Peripheral module clock (PCLKA), high-speed mode | | | | 120 | MHz | High-speed mode | 38 |
| Peripheral module clock (PCLKB), high-speed mode | | | | 60 | MHz | High-speed mode | 38 |
| Peripheral module clock (PCLKC), high-speed mode | | | | 60 | MHz | High-speed mode; ADC12 use requires at least 1 MHz | 38 |
| Peripheral module clock (PCLKD), high-speed mode | | | | 120 | MHz | High-speed mode | 38 |
| Flash interface clock (FCLK), high-speed mode | | | | 60 | MHz | High-speed mode | 38 |
| External bus clock (BCLK), high-speed mode | | | | 120 | MHz | High-speed mode | 38 |
| Main clock oscillator frequency | fMAIN | 8 | | 24 | MHz | | 40 |
| PLL clock frequency | fPLL | 120 | | 240 | MHz | | 40 |
| HOCO oscillation frequency fHOCO16 (without FLL) | fHOCO16 | 15.78 | 16 | 16.22 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |
| HOCO oscillation frequency fHOCO18 (without FLL) | fHOCO18 | 17.75 | 18 | 18.25 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |
| HOCO oscillation frequency fHOCO20 (without FLL) | fHOCO20 | 19.72 | 20 | 20.28 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |
| LOCO clock oscillation frequency | fLOCO | 27.8528 | 32.768 | 37.6832 | kHz | | 40 |
| MOCO clock oscillation frequency | FMOCO | 6.8 | 8 | 9.2 | MHz | | 40 |
| RES pulse width, power-on | tRESWP | 1 | | | ms | Power-on, Figure 2.13 | 43 |
| Recovery time from Deep Software Standby mode | tDSBY | | 0.65 | 1 | ms | Figure 2.16 | 43 |
| I/O port input data pulse width | tPRW | 1.5 | | | tPcyc | Figure 2.34 | 61 |
| SCI receive data setup time (clock synchronous) | tRXS | 15 | | | ns | Clock synchronous mode, Figure 2.44 | 64 |
| SCI receive data hold time (clock synchronous) | tRXH | 5 | | | ns | Clock synchronous mode, Figure 2.44 | 64 |
| SPI simple mode data input setup time | tSU | 33.3 | | | ns | Simple SPI mode, Figure 2.46 to 2.49 | 65 |
| SPI simple mode data input hold time | tH | 33.3 | | | ns | Simple SPI mode, Figure 2.46 to 2.49 | 65 |
| System supply voltage (digital ground) | VSS | | 0 | | V | | 30 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminal material (Pb-free) A: Sn (Tin) only | 10 |
## CAD (KiCad official)
- Symbol: `R7FA6M3AH3CFP#AA0`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: QFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `r7fa6m3ah3cfp-aa0-etched.step` / `r7fa6m3ah3cfp-aa0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r7fa6m3ah3cfp-aa0.step` / `r7fa6m3ah3cfp-aa0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/dst/ra6m3-group-datasheet) (115 pp, sha256 `61df63b02547f21b`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r7fa6m3ah3cfp-aa0-datasheet.pdf)