← Commit history
Publish 0.1.1
7 files changed
+3377−2682
README.md+149−154@@ -8,106 +8,106 @@ R7FA6M3AH3CFP#AA0 from RENESAS, in a QFP-100(14x14). Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---|-| 1 | P400 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ0, AGTIO1, GTIOC6A, SCK4, ET0_WOL. |-| 2 | P401 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ5, GTETRGA, GTIOC6B, CTX0, TXD7/MOSI7/SDA7. |-| 3 | P402 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ4, CACREF, AGTIO0/AGTIO1, RTCIC0, CRX0. |-| 4 | P403 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates AGTIO0/AGTIO1, GTIOC3A, RTCIC1, CTS7_RTS7/SS7. |-| 5 | P404 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC3B, RTCIC2, SSILRCK0/SSIFS0_A, ET0_EXOUT. |-| 6 | P405 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC1A, SSITXD0_A, ET0_TX_EN, RMII0_TXD_EN_B. |-| 7 | P406 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC1B, SSLB3_C, SSIRXD0_A, ET0_RX_ER. |-| 8 | VBATT | power_in | Backup power supply pin for the RTC, sub-clock oscillator and backup area; VBATT is 1.65 to 3.6 V (Table 2.2). |-| 9 | VCL0 | passive | Connect to VSS through a 0.1 µF smoothing capacitor placed close to the pin to stabilize the internal power supply. |-| 10 | XCIN | input | Sub-clock oscillator input; a 32.768 kHz crystal is connected between XCOUT and XCIN. |-| 11 | XCOUT | output | Sub-clock oscillator output; a 32.768 kHz crystal is connected between XCOUT and XCIN. |-| 12 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |-| 13 | P213/XTAL | output | Crystal resonator output for the main clock oscillator (8 to 24 MHz); the same pin also provides IRQ2, GTETRGC, GTIOC0A and TXD1/MOSI1/SDA1. |-| 14 | P212/EXTAL | input | External clock input or crystal input for the main clock oscillator (8 to 24 MHz); the same pin also provides IRQ3, AGTEE1, GTETRGD and GTIOC0B. |-| 15 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin. |-| 16 | P708 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ11, RXD1/MISO1/SCL1, SSLA3_B, ET0_ETXD3, TS12. |-| 17 | P415 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ8, GTIOC0A, USB_VBUSEN, SD0CD_A, TS11. |-| 18 | P414 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ9, GTIOC0B, SSLA1_B, SD0WP_A, TS10. |-| 19 | P413 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates GTOUUP, CTS0_RTS0/SS0, SSLA0_B, SD0CLK_A, TS09. |-| 20 | P412 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTEE1, GTOULO, SCK0, RSPCKA_B, SD0CMD_A, TS08. |-| 21 | P411 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTOA1, GTOVUP, GTIOC9A, TXD0/MOSI0/SDA0, SD0DAT0_A, TS07. |-| 22 | P410 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTOB1, GTOVLO, GTIOC9B, RXD0/MISO0/SCL0, SD0DAT1_A, TS06. |-| 23 | P409 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN, TS05. |-| 24 | P408 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ7, GTOWLO, GTIOC10B, USBHS_ID, TS04. |-| 25 | P407 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTIO0, RTCOUT, USB_VBUS, CTS4_RTS4/SS4, ADTRG0, TS03. |-| 26 | VSS_USB | power_in | Ground pin for the USB on-chip transceiver; connect to the system ground at 0 V. |-| 27 | USB_DM | bidirectional | USB D- I/O pin of the USB Full-Speed on-chip transceiver; connect to the D- line of the USB bus. |-| 28 | USB_DP | bidirectional | USB D+ I/O pin of the USB Full-Speed on-chip transceiver; connect to the D+ line of the USB bus. |-| 29 | VCC_USB | power_in | USB power supply pin; must be supplied at the same voltage as VCC (Table 2.2). |-| 30 | P207 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates SSLB2_A/QSSL, TS02, LCD_DATA23_B. |-| 31 | P206 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ0, WAIT, GTIU, USB_VBUSEN, RXD4/MISO4/SCL4, TS01. |-| 32 | P205 | bidirectional | 5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ1, A16, AGTO1, GTIV, GTIOC4A, TXD4/MOSI4/SDA4, and CLKOUT. |-| 33 | P214 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TCLK, GTIU, QSPCLK, ET0_MDC, SD0CLK_B, LCD_DATA22_B. |-| 34 | P211 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA0, GTIV, QIO0, ET0_MDIO, SD0CMD_B, LCD_DATA21_B. |-| 35 | P210 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA1, GTIW, QIO1, ET0_WOL, SD0CD_B, LCD_DATA20_B. |-| 36 | P209 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA2, GTOVUP, QIO2, ET0_EXOUT, SD0WP_B, LCD_DATA19_B. |-| 37 | P208 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA3, GTOVLO, QIO3, ET0_LINKSTA, SD0DAT0_B, LCD_DATA18_B. |-| 38 | RES | input | Reset input; the MCU enters the reset state when this pin goes low, with a minimum pulse width of 200 µs in normal operation (Table 2.15). |-| 39 | P201/MD | bidirectional | General-purpose I/O port P201; MD is the operating-mode select pin whose level must not change during operating-mode transition on release from reset. |-| 40 | P200 | input | Input-only port P200; NMI is the non-maskable interrupt request input, with input leakage limited to 1.0 µA (Table 2.6). |-| 41 | P307 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A12, GTOUUP, CTS6, QIO0, LCD_DATA19_A. |-| 42 | P306 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A11, GTOULO, SCK6, QSSL, LCD_DATA18_A. |-| 43 | P305 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ8, A10, GTOWUP, TXD6/MOSI6/SDA6, QSPCLK, LCD_DATA17_A. |-| 44 | P304 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ9, A09, GTOWLO, GTIOC7A, RXD6/MISO6/SCL6, LCD_DATA16_A. |-| 45 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |-| 46 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin. |-| 47 | P303 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A08, GTIOC7B, LCD_DATA15_A. |-| 48 | P302 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ5, A07, GTOUUP, GTIOC4A, TXD2/MOSI2/SDA2, SSLB3_B, LCD_DATA14_A. |-| 49 | P301 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ6, A06, AGTIO0, GTOULO, GTIOC4B, RXD2/MISO2/SCL2, LCD_DATA13_A. |-| 50 | P300/TCK/SWCLK | input | JTAG test clock input TCK, also the SWCLK serial-wire clock input; minimum TCK cycle time is 40 ns (Table 2.56). |-| 51 | P108/TMS/SWDIO | bidirectional | JTAG mode select input TMS and SWDIO serial-wire data I/O; SWDIO setup and hold times are minimum 8 ns (Table 2.57). |-| 52 | P109/TDO | output | JTAG test data output TDO, also the SWO serial-wire trace output; TDO data delay is maximum 20 ns (Table 2.56). |-| 53 | P110/TDI | input | JTAG test data input TDI; setup and hold times are minimum 8 ns (Table 2.56). |-| 54 | P111 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ4, A05, GTIOC3A_A, SCK2, SCK9, LCD_DATA12_A. |-| 55 | P112 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A04, GTIOC3B_A, TXD2/MOSI2/SDA2, SCK1, SSLB0_B, LCD_DATA11_A. |-| 56 | P113 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A03, GTIOC2A, RXD2/MISO2/SCL2, SSILRCK0/SSIFS0_B, LCD_DATA10_A. |-| 57 | P114 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A02, GTIOC2B, SSIRXD0_B, LCD_DATA09_A. |-| 58 | P115 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A01, GTIOC4A, SSITXD0_B, LCD_DATA08_A. |-| 59 | P608 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A00/BC0, A00/DQM1, GTIOC4B, LCD_DATA07_A. |-| 60 | P609 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates CS1, CKE, GTIOC5A, CTX1, LCD_DATA06_A. |-| 61 | P610 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates CS0, WE, GTIOC5B, CRX1, LCD_DATA05_A. |-| 62 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin. |-| 63 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |-| 64 | VCL | passive | Connect to VSS through a 0.1 µF smoothing capacitor placed close to the pin to stabilize the internal power supply. |-| 65 | P602 | bidirectional | I/O port with high-drive capability (20 mA average / 40 mA max per pin, Table 2.5); alternates EBCLK, SDCLK, GTIOC7B, TXD9, LCD_DATA04_A. |-| 66 | P601 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates WR/WR0, DQM0, GTIOC6A, RXD9, LCD_DATA03_A. |-| 67 | P600 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates RD, GTIOC6B, SCK9, LCD_DATA02_A, and CLKOUT/CACREF. |-| 68 | P107 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR07, D07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8, LCD_DATA01_A. |-| 69 | P106 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR06, D06, AGTOB0, GTIOC8B, SCK8, SSLA3_A, LCD_DATA00_A. |-| 70 | P105 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ0/KR05, D05, GTETRGA, GTIOC1A, TXD8/MOSI8/SDA8, LCD_TCON3_A. |-| 71 | P104 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ1/KR04, D04, GTETRGB, GTIOC1B, RXD8/MISO8/SCL8, LCD_TCON2_A. |-| 72 | P103 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR03, D03, GTOWUP, GTIOC2A_A, CTX0, CTS0_RTS0/SS0, LCD_TCON1_A. |-| 73 | P102 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR02, D02, AGTO0, GTOWLO, GTIOC2B_A, CRX0, SCK0, ADTRG0, LCD_TCON0_A. |-| 74 | P101 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR01, D01, AGTEE0, GTETRGB, GTIOC5A, TXD0/MOSI0/SDA0, CTS1_RTS1/SS1. |-| 75 | P100 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ2/KR00, D00, AGTIO0, GTETRGA, GTIOC5B, RXD0/MISO0/SCL0, LCD_EXTCLK_A. |-| 76 | P500 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates AGTOA0, GTIU, GTIOC11A, USB_VBUSEN, QSPCLK, SD1CLK_A, AN016, IVREF0. |-| 77 | P501 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ11, AGTOB0, GTIV, GTIOC11B, USB_OVRCURA, TXD5/MOSI5/SDA5, QSSL, AN116, IVREF1. |-| 78 | P502 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ12, GTIW, GTIOC12A, USB_OVRCURB, RXD5/MISO5/SCL5, QIO0, AN017, IVCMP0. |-| 79 | P503 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTETRGC, GTIOC12B, USB_EXICEN, CTS6_RTS6/SS6, SCK5, QIO1, AN117. |-| 80 | P504 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates ALE, GTETRGD, GTIOC13A, USB_ID, SCK6, CTS5_RTS5/SS5, QIO2, AN018. |-| 81 | P508 | bidirectional | General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates SCK6, SCK5 and ADC12 analog input AN020. |-| 82 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin. |-| 83 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |-| 84 | P015 | bidirectional | I/O port with 4 mA average / 8 mA max output current per pin (Table 2.5); alternates IRQ13, AN006/AN106, DA1/IVCMP1. |-| 85 | P014 | bidirectional | I/O port with 4 mA average / 8 mA max output current per pin (Table 2.5); alternates IRQ... AN005/AN105 and DA0/IVREF3. |+| 1 | P400 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ0, AGTIO1, GTIOC6A and AUDIO_CLK per the pin list. |+| 2 | P401 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ5-DS, GTETRGA, GTIOC6B and CTX0. |+| 3 | P402 | bidirectional | General-purpose I/O port; alternate functions include CACREF, IRQ4-DS, AGTIO0/AGTIO1, RTCIC0 and CRX0. |+| 4 | P403 | bidirectional | General-purpose I/O port; alternate functions include AGTIO0/AGTIO1, GTIOC3A, RTCIC1 and CTS7_RTS7/SS7. |+| 5 | P404 | bidirectional | General-purpose I/O port; alternate functions include GTIOC3B, RTCIC2 and SSILRCK0/SSIFS0_A. |+| 6 | P405 | bidirectional | General-purpose I/O port; alternate functions include GTIOC1A, SSITXD0_A, ET0_TX_EN and PIXD5. |+| 7 | P406 | bidirectional | General-purpose I/O port; alternate functions include GTIOC1B, SSLB3_C, SSIRXD0_A and ET0_RX_ER. |+| 8 | VBATT | power_in | Backup power pin for the battery backup area (RTC, sub-clock oscillator, backup registers); VBATT is specified at 1.65 to 3.6 V. |+| 9 | VCL0 | passive | Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL0 pin to stabilize the internal power supply. |+| 10 | XCIN | input | Input pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN. |+| 11 | XCOUT | output | Output pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN. |+| 12 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |+| 13 | P213/XTAL | output | Crystal resonator output pin of the main clock oscillator (8 to 24 MHz); shares port P213 with IRQ2 and GTIOC0A. |+| 14 | P212/EXTAL | input | External clock input pin of the main clock oscillator (or crystal input); shares port P212 with IRQ3, AGTEE1 and GTIOC0B. |+| 15 | VCC | power_in | Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |+| 16 | P708 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ11, RXD1/MISO1/SCL1, SSLA3_B and TS12. |+| 17 | P415 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ8, GTIOC0A, USB_VBUSEN and ET0_TX_EN. |+| 18 | P414 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ9, GTIOC0B, SSLA1_B and ET0_RX_ER. |+| 19 | P413 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include GTOUUP, CTS0_RTS0/SS0, SSLA0_B and ET0_ETXD1. |+| 20 | P412 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include AGTEE1, GTOULO, SCK0 and RSPCKA_B. |+| 21 | P411 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ4, AGTOA1, GTOVUP, GTIOC9A and TXD0/MOSI0/SDA0. |+| 22 | P410 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ5, AGTOB1, GTOVLO, GTIOC9B and RXD0/MISO0/SCL0. |+| 23 | P409 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN and TXD3/MOSI3/SDA3. |+| 24 | P408 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include IRQ7, GTOWLO, GTIOC10B, USBHS_ID and ET0_CRS. |+| 25 | P407 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include AGTIO0, RTCOUT, CTS4_RTS4/SS4 and ADTRG0. |+| 26 | VSS_USB | power_in | Ground pin for the USB (USBFS) transceiver; connect to the system ground (0 V). |+| 27 | USB_DM | bidirectional | D- I/O pin of the USBFS on-chip transceiver; connect to the D- pin of the USB bus. |+| 28 | USB_DP | bidirectional | D+ I/O pin of the USBFS on-chip transceiver; connect to the D+ pin of the USB bus. |+| 29 | VCC_USB | power_in | USB power supply pin; connect to VCC (Note 2, p.30). |+| 30 | P207 | bidirectional | General-purpose I/O port; alternate functions include A17, SSLB2_A/QSSL, TS02 and LCD_DATA23_B. |+| 31 | P206 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include WAIT, GTIU, USB_VBUSEN and ET0_LINKSTA. |+| 32 | P205 | bidirectional | 5 V-tolerant general-purpose I/O port; alternate functions include CLKOUT, IRQ1-DS, GTIV, GTIOC4A and USB_OVRCURA. |+| 33 | P214 | bidirectional | General-purpose I/O port; alternate functions include TCLK, GTIU, QSPCLK and ET0_MDC. |+| 34 | P211 | bidirectional | General-purpose I/O port; alternate functions include TDATA0, GTIV, QIO0 and ET0_MDIO. |+| 35 | P210 | bidirectional | General-purpose I/O port; alternate functions include TDATA1, GTIW, QIO1 and ET0_WOL. |+| 36 | P209 | bidirectional | General-purpose I/O port; alternate functions include TDATA2, GTOVUP, QIO2 and ET0_EXOUT. |+| 37 | P208 | bidirectional | General-purpose I/O port; alternate functions include TDATA3, GTOVLO, QIO3 and ET0_LINKSTA. |+| 38 | RES | input | Reset signal input; the MCU enters the reset state when this pin goes low. |+| 39 | P201/MD | input | Operating mode control pin (MD); its level must not change during operating mode transition on release from reset; shares port P201. |+| 40 | P200 | input | Input-only port P200, also the non-maskable interrupt request input (NMI). |+| 41 | P307 | bidirectional | General-purpose I/O port; alternate functions include A12, GTOUUP, CTS6 and QIO0. |+| 42 | P306 | bidirectional | General-purpose I/O port; alternate functions include A11, GTOULO, SCK6 and QSSL. |+| 43 | P305 | bidirectional | General-purpose I/O port; alternate functions include IRQ8, A10, GTOWUP and TXD6/MOSI6/SDA6. |+| 44 | P304 | bidirectional | General-purpose I/O port; alternate functions include IRQ9, A09, GTOWLO, GTIOC7A and RXD6/MISO6/SCL6. |+| 45 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |+| 46 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |+| 47 | P303 | bidirectional | General-purpose I/O port; alternate functions include A08, GTIOC7B and LCD_DATA15_A. |+| 48 | P302 | bidirectional | General-purpose I/O port; alternate functions include IRQ5, A07, GTOUUP, GTIOC4A and TXD2/MOSI2/SDA2. |+| 49 | P301 | bidirectional | General-purpose I/O port; alternate functions include AGTIO0, A06, GTOULO, GTIOC4B and RXD2/MISO2/SCL2. |+| 50 | P300/TCK/SWCLK | input | JTAG TCK / serial wire SWCLK clock input; shares port P300 (GTIOC0A_A, GTOUUP). |+| 51 | P108/TMS/SWDIO | bidirectional | JTAG TMS / serial wire SWDIO data input/output; shares port P108 (GTOULO, GTIOC0B_A). |+| 52 | P109/TDO/SWO | output | JTAG TDO / serial wire trace output (SWO); shares port P109 (CLKOUT, GTOVUP, GTIOC1A_A, CTX1). |+| 53 | P110/TDI | input | JTAG TDI data input; shares port P110 (IRQ3, GTOVLO, GTIOC1B_A, CRX1). |+| 54 | P111 | bidirectional | General-purpose I/O port; alternate functions include IRQ4, A05, GTIOC3A_A and SCK2. |+| 55 | P112 | bidirectional | General-purpose I/O port; alternate functions include A04, GTIOC3B_A, TXD2/MOSI2/SDA2 and SSIBCK0_B. |+| 56 | P113 | bidirectional | General-purpose I/O port; alternate functions include A03, GTIOC2A, RXD2/MISO2/SCL2 and SSILRCK0/SSIFS0_B. |+| 57 | P114 | bidirectional | General-purpose I/O port; alternate functions include A02, GTIOC2B and SSIRXD0_B. |+| 58 | P115 | bidirectional | General-purpose I/O port; alternate functions include A01, GTIOC4A and SSITXD0_B. |+| 59 | P608 | bidirectional | General-purpose I/O port; alternate functions include A00/BC0, GTIOC4B and LCD_DATA07_A. |+| 60 | P609 | bidirectional | General-purpose I/O port; alternate functions include CS1, CKE, GTIOC5A and CTX1. |+| 61 | P610 | bidirectional | General-purpose I/O port; alternate functions include CS0, WE, GTIOC5B and CRX1. |+| 62 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |+| 63 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |+| 64 | VCL | passive | Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL pin to stabilize the internal power supply. |+| 65 | P602 | bidirectional | General-purpose I/O port; alternate functions include EBCLK, SDCLK, GTIOC7B and TXD9. |+| 66 | P601 | bidirectional | General-purpose I/O port; alternate functions include WR/WR0, DQM0, GTIOC6A and RXD9. |+| 67 | P600 | bidirectional | General-purpose I/O port; alternate functions include RD, GTIOC6B, SCK9 and CLKOUT. |+| 68 | P107 | bidirectional | General-purpose I/O port; alternate functions include D07/A07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8 and KR07. |+| 69 | P106 | bidirectional | General-purpose I/O port; alternate functions include D06/A06, AGTOB0, GTIOC8B, SCK8 and KR06. |+| 70 | P105 | bidirectional | General-purpose I/O port; alternate functions include IRQ0/KR05, D05/A05, GTETRGA, GTIOC1A and TXD8/MOSI8/SDA8. |+| 71 | P104 | bidirectional | General-purpose I/O port; alternate functions include IRQ1/KR04, D04/A04, GTETRGB, GTIOC1B and RXD8/MISO8/SCL8. |+| 72 | P103 | bidirectional | General-purpose I/O port; alternate functions include KR03, D03/A03, GTOWUP, GTIOC2A_A and CTX0. |+| 73 | P102 | bidirectional | General-purpose I/O port; alternate functions include KR02, D02/A02, AGTO0, GTOWLO and CRX0. |+| 74 | P101 | bidirectional | General-purpose I/O port; alternate functions include IRQ1/KR01, D01/A01, AGTEE0, GTETRGB and GTIOC5A. |+| 75 | P100 | bidirectional | General-purpose I/O port; alternate functions include IRQ2/KR00, D00/A00, AGTIO0, GTETRGA and GTIOC5B. |+| 76 | P500 | bidirectional | General-purpose I/O port; alternate functions include AGTOA0, GTIU, GTIOC11A, QSPCLK and analog input AN016. |+| 77 | P501 | bidirectional | General-purpose I/O port; alternate functions include IRQ11, AGTOB0, GTIV, GTIOC11B and analog input AN116. |+| 78 | P502 | bidirectional | General-purpose I/O port; alternate functions include IRQ12, GTIW, GTIOC12A, QIO0 and analog input AN017. |+| 79 | P503 | bidirectional | General-purpose I/O port; alternate functions include GTETRGC, GTIOC12B, CTS6_RTS6/SS6 and analog input AN117. |+| 80 | P504 | bidirectional | General-purpose I/O port; alternate functions include ALE, GTETRGD, GTIOC13A, SCK6 and analog input AN018. |+| 81 | P508 | bidirectional | General-purpose I/O port; alternate functions include SCK6, SCK5 and analog input AN020. |+| 82 | VCC | power_in | Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin. |+| 83 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |+| 84 | P015 | bidirectional | General-purpose I/O port (IRQ13); analog input AN006/AN106 and D/A output DA1 or comparator input IVCMP1 per the pin list. |+| 85 | P014 | bidirectional | General-purpose I/O port; analog input AN005/AN105 and D/A output DA0 or comparator reference IVREF3 per the pin list. | | 86 | VREFL | power_in | Analog reference ground for the ADC12 unit 1 and D/A converter; connect to VSS when these are not used. | | 87 | VREFH | power_in | Analog reference voltage supply for the ADC12 unit 1 and D/A converter; connect to VCC when these are not used. |-| 88 | AVCC0 | power_in | Analog power supply for the ADC12 and PGA; supply at the same voltage as VCC (Table 2.2). |-| 89 | AVSS0 | power_in | Analog ground for the ADC12 and PGA; supply at the same voltage as VSS (0 V). |+| 88 | AVCC0 | power_in | Analog power supply for the ADC12, comparator and PGA; supply at the same voltage as VCC (Note 2, p.30). |+| 89 | AVSS0 | power_in | Analog ground for the ADC12, comparator and PGA; supply at the same voltage as VSS. | | 90 | VREFL0 | power_in | Analog reference ground for the ADC12 unit 0; connect to VSS when the ADC12 unit 0 is not used. |-| 91 | VREFH0 | power_in | Analog reference voltage supply for the ADC12 unit 0; must satisfy 2.7 V ≤ VREFH0 ≤ AVCC0 and be connected to VCC when not used. |-| 92 | P008 | bidirectional | I/O port with 2 mA average / 4 mA max output current per pin (Table 2.5); alternates IRQ12-DS and ADC12 analog input AN003. |-| 93 | P007 | input | Input-only port P007; alternates PGAVSS100/AN107 analog functions, with input leakage up to 45 µA before initialization (Table 2.6). |-| 94 | P006 | input | Input-only port P006; alternates IRQ11-DS, AN102 and IVCMP2, with input leakage limited to 1.0 µA (Table 2.6). |-| 95 | P005 | input | Input-only port P005; alternates IRQ10-DS and AN101, with input leakage limited to 1.0 µA (Table 2.6). |-| 96 | P004 | input | Input-only port P004; alternates IRQ9-DS and AN100, with input leakage limited to 1.0 µA (Table 2.6). |-| 97 | P003 | input | Input-only port P003; alternates PGAVSS000/AN007 analog functions, with input leakage up to 45 µA before initialization (Table 2.6). |-| 98 | P002 | input | Input-only port P002; alternates IRQ8-DS and AN002, with input leakage limited to 1.0 µA (Table 2.6). |-| 99 | P001 | input | Input-only port P001; alternates IRQ7-DS and AN001, with input leakage limited to 1.0 µA (Table 2.6). |-| 100 | P000 | input | Input-only port P000; alternates IRQ6-DS and AN000, with input leakage limited to 1.0 µA (Table 2.6). |+| 91 | VREFH0 | power_in | Analog reference voltage supply for the ADC12 unit 0, with 2.7 V <= VREFH0 <= AVCC0; connect to VCC when not used. |+| 92 | P008 | bidirectional | General-purpose I/O port; alternate functions include IRQ12-DS and analog input AN003. |+| 93 | P007 | input | Input-only general-purpose port; the pin is also PGAVSS100/AN107 for the PGA differential input. |+| 94 | P006 | input | Input-only general-purpose port; alternate functions include IRQ11-DS, analog input AN102 and comparator input IVCMP2. |+| 95 | P005 | input | Input-only general-purpose port; alternate functions include IRQ10-DS, analog input AN101 and comparator input IVCMP2. |+| 96 | P004 | input | Input-only general-purpose port; alternate functions include IRQ9-DS, analog input AN100 and comparator input IVCMP2. |+| 97 | P003 | input | Input-only general-purpose port; the pin is also PGAVSS000/AN007 for the PGA differential input. |+| 98 | P002 | input | Input-only general-purpose port; alternate functions include IRQ8-DS, analog input AN002 and comparator input IVCMP2. |+| 99 | P001 | input | Input-only general-purpose port; alternate functions include IRQ7-DS, analog input AN001 and comparator input IVCMP2. |+| 100 | P000 | input | Input-only general-purpose port; alternate functions include IRQ6-DS, analog input AN000 and comparator input IVCMP2. | ## Key specifications @@ -124,65 +124,60 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Power supply voltage | VCC, VCC_USB | -0.3 | | 4 | V | | 29 |+| Power supply voltage | VCC | -0.3 | | 4 | V | VCC, VCC_USB (Table 2.1) | 29 | | VBATT power supply voltage | VBATT | -0.3 | | 4 | V | | 29 |-| Input voltage (except 5 V-tolerant ports) | Vin | -0.3 | | | V | | 29 |-| Input voltage (5 V-tolerant ports) | Vin | -0.3 | | | V | | 29 |-| Reference power supply voltage | VREFH/VREFH0 | -0.3 | | | V | | 29 |-| Analog power supply voltage | AVCC0 | -0.3 | | 4 | V | | 29 |-| Operating temperature (-40 to +85 °C product) | Topr | -40 | | 85 | °C | | 29 |-| Operating temperature (-40 to +105 °C product) | Topr | -40 | | 105 | °C | | 29 |-| Storage temperature | Tstg | -55 | | 125 | °C | | 29 |+| Input voltage (except 5 V-tolerant ports) | Vin | -0.3 | | | V | Maximum printed as VCC + 0.3 V (not a fixed number) | 29 |+| Input voltage (5 V-tolerant ports) | Vin | -0.3 | | 5.8 | V | Printed as VCC + 4.0 (max 5.8) | 29 | | Power supply voltage (USB/SDRAM not used) | VCC | 2.7 | | 3.6 | V | When USB/SDRAM is not used | 30 | | Power supply voltage (USB/SDRAM used) | VCC | 3 | | 3.6 | V | When USB/SDRAM is used | 30 |-| VBATT power supply voltage | VBATT | 1.65 | | 3.6 | V | | 30 |+| VBATT power supply voltage | VBATT | 1.65 | | 3.6 | V | Low CL crystal cannot be used below VBATT = 1.8 V (note 2) | 30 | | Permissible junction temperature | Tj | | | 125 | °C | High-speed mode, Low-speed mode | 30 |-| Permissible junction temperature | Tj | | | 105 | °C | Subosc-speed mode | 30 |-| Input high voltage, ETHERC | VIH | 2.3 | | | V | | 31 |-| Input high voltage, IIC (SMBus) *1 | VIH | 2.1 | | | V | | 31 |-| Input low voltage, IIC (SMBus) *1 | VIL | | | -0.8 | V | | 31 |-| Input high voltage, IIC (SMBus) *2 | VIH | 2.1 | | | V | | 31 |-| Permissible output current (average per pin), ports P008 to P010, P201 | IOH | | | -2 | mA | | 32 |-| Permissible output current (average per pin), ports P008 to P010, P201 | IOL | | | 2 | mA | | 32 |-| Permissible output current (average per pin), ports P014, P015 | IOH | | | -4 | mA | | 32 |-| Permissible output current (average per pin), ports P014, P015 | IOL | | | 4 | mA | | 32 |-| Permissible output current (average per pin), 19-pin ports, high drive | IOH | | | -20 | mA | | 32 |-| Permissible output current (average per pin), 19-pin ports, high drive | IOL | | | 20 | mA | | 32 |-| Permissible output current (average per pin), other output pins, high drive | IOH | | | -16 | mA | | 32 |-| Permissible output current (average per pin), other output pins, high drive | IOL | | | 16 | mA | | 32 |-| Permissible output current (max per pin), 19-pin ports, high drive | IOH | | | -40 | mA | | 32 |-| Permissible output current (max per pin), 19-pin ports, high drive | IOL | | | 40 | mA | | 32 |-| Permissible output current (max per pin), other output pins, high drive | IOH | | | -32 | mA | | 32 |-| Permissible output current (max per pin), other output pins, high drive | IOL | | | 32 | mA | | 32 |-| Permissible output current (max total, all output pins) | ΣIOH (max) | | | -80 | mA | | 32 |-| Permissible output current (max total, all output pins) | ΣIOL (max) | | | 80 | mA | | 32 |-| Output voltage, IIC | VOL | | | -0.4 | V | IOL = 3.0 mA | 33 |-| Output voltage, IIC | VOL | | | -0.6 | V | IOL = 6.0 mA | 33 |-| Output voltage, IIC*1 | VOL | | | -0.4 | V | IOL = 15.0 mA (ICFER.FMPE = 1) | 33 |-| Output voltage, ETHERC | VOL | | | -0.4 | V | IOL = 1.0 mA | 33 |-| Output voltage, ports P205, P206, P407 to P415, P602, P708 to P713, PB01 (19 pins) | VOL | | | -1 | V | IOL = 20 mA, VCC = 3.3 V | 33 |-| Output voltage, other output pins | VOL | | | -0.5 | V | IOL = 1.0 mA | 33 |-| Input leakage current, RES | /Iin/ | | | -5 | μA | Vin = 0 V, Vin = 5.5 V | 33 |-| Input leakage current, ports P000 to P002, P004 to P006, P200 | Iin | | | 1 | μA | Vin = 0 V, Vin = VCC | 33 |-| Input leakage current, ports P003, P007 before initialization | Iin | | | -45 | μA | Vin = 0 V, Vin = VCC | 33 |-| Input leakage current, ports P003, P007 after initialization | Iin | | | -1 | μA | Vin = 0 V, Vin = VCC | 33 |-| Three-state leakage current, 5 V-tolerant ports | /ITSI/ | | | 5 | μA | Vin = 0 V, Vin = 5.5 V | 33 |-| Three-state leakage current, other ports (except P000 to P007, P200) | ITSI | | | 1 | μA | Vin = 0 V, Vin = VCC | 33 |-| Input pull-up MOS current, ports P0 to PB (except P000 to P007) | Ip | -300 | | -10 | μA | VCC = 2.7 to 3.6 V, Vin = 0 V | 33 |-| Input capacitance, USB_DP, USB_DM, ports P003, P007, P014, P015, P400, P401, P511, P512 | Cin | | | 16 | pF | Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C | 33 |-| Input capacitance, other input pins | Cin | | | 8 | pF | Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C | 33 |-| Operation frequency, system clock (ICLK) | f | | | 120 | MHz | | 38 |-| Operation frequency, peripheral module clock (PCLKA) | | | | 120 | MHz | | 38 |-| Operation frequency, peripheral module clock (PCLKB) | | | | 60 | MHz | | 38 |-| Operation frequency, peripheral module clock (PCLKC) | | | | 60 | MHz | | 38 |-| Operation frequency, peripheral module clock (PCLKD) | | | | 120 | MHz | | 38 |-| Operation frequency, flash interface clock (FCLK) | | | | 60 | MHz | | 38 |-| Operation frequency, external bus clock (BCLK) | | | | 120 | MHz | | 38 |-| Operation frequency, EBCLK pin output | | | | 60 | MHz | | 38 |-| Supply current, high-speed mode maximum | ICC | | | 137 | mA | ICLK = 120 MHz, PCLKA = 120 MHz, PCLKB = 60 MHz, PCLKC = 60 MHz, PCLKD = 120 MHz, FCLK = 60 MHz, BCLK = 120 MHz | 34 |-| Supply current, sleep mode | ICC | | | 46 | mA | Sleep mode | 34 |-| Full-speed USB operating current | ICCUSBFS | | | 10 | mA | VCC_USB | 35 |-| Low-speed USB operating current | ICCUSBLS | | | 6.5 | mA | VCC_USB | 35 |+| Input leakage current RES | /Iin/ | | | -5 | μA | Vin = 0 V and Vin = 5.5 V (printed as -5.0; sign as printed) | 33 |+| Input pull-up MOS current | Ip | -300 | | -10 | μA | VCC = 2.7 to 3.6 V, Vin = 0 V | 33 |+| Input capacitance (other input pins) | Cin | | | 8 | pF | Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C | 33 |+| Output voltage (other output pins) | VOL | | | 0.5 | V | IOL = 1.0 mA | 33 |+| Permissible output current, average per pin (other output pins, low drive) | IOH | | | -2 | mA | Low drive, other output pins, average value per pin | 32 |+| Permissible output current, average per pin (other output pins, low drive) | IOL | | | 2 | mA | Low drive, other output pins, average value per pin | 32 |+| Permissible output current, average per pin (other output pins, middle drive) | IOH | | | -4 | mA | Middle drive, other output pins, average value per pin | 32 |+| Permissible output current, average per pin (other output pins, middle drive) | IOL | | | 4 | mA | Middle drive, other output pins, average value per pin | 32 |+| Permissible output current, average per pin (other output pins, high drive) | IOH | | | -16 | mA | High drive, other output pins, average value per pin | 32 |+| Permissible output current, average per pin (other output pins, high drive) | IOL | | | 16 | mA | High drive, other output pins, average value per pin | 32 |+| Permissible output current, total pins | ΣIOH(max) | | | -80 | mA | Maximum of all output pins | 32 |+| Permissible output current, total pins | ΣIOL(max) | | | 80 | mA | Maximum of all output pins | 32 |+| Supply current, maximum | ICC | | | 137 | mA | High-speed mode maximum, ICLK = 120 MHz, BCLK = 120 MHz | 34 |+| Deep Software Standby current, standby SRAM powered | ICC | | 30 | 113 | μA | Power supplied to Standby SRAM and USB resume detecting unit, Ta ≤ 105 °C | 34 |+| Analog supply current during 12-bit A/D conversion | AICC | | 0.8 | 1.1 | mA | During 12-bit A/D conversion | 34 |+| Analog supply current during 12-bit A/D conversion with S/H amp | AICC | | 2.3 | 3.3 | mA | During 12-bit A/D conversion with S/H amp | 34 |+| PGA analog supply current | AICC | | 1 | 3 | mA | PGA (1ch) | 34 |+| D/A conversion analog supply current (with AMP output) | AICC | | 0.6 | 1.1 | mA | During D/A conversion (per unit), with AMP output | 34 |+| ADC12, DAC12 standby current (all units) | AICC | | 2 | 8 | μA | ADC12, DAC12 in standby modes (all units) | 34 |+| D/A conversion analog supply current (without AMP output) | AICC | | 0.1 | 0.2 | mA | During D/A conversion (per unit), without AMP output | 34 |+| VCC rising gradient (voltage monitor 0 reset disabled at startup) | SrVCC | 0.0084 | | 20 | ms/V | Voltage monitor 0 reset disabled at startup | 38 |+| VCC falling gradient | SfVCC | 0.0084 | | | ms/V | | 38 |+| Allowable voltage change rising and falling gradient | dt/dVCC | 1 | | | ms/V | When VCC change exceeds VCC ±10% | 38 |+| Allowable ripple frequency | fr(VCC) | | | 10 | kHz | Figure 2.6 | 38 |+| System clock (ICLK) operation frequency, high-speed mode | f | | | 120 | MHz | High-speed mode | 38 |+| Peripheral module clock (PCLKA), high-speed mode | | | | 120 | MHz | High-speed mode | 38 |+| Peripheral module clock (PCLKB), high-speed mode | | | | 60 | MHz | High-speed mode | 38 |+| Peripheral module clock (PCLKC), high-speed mode | | | | 60 | MHz | High-speed mode; ADC12 use requires at least 1 MHz | 38 |+| Peripheral module clock (PCLKD), high-speed mode | | | | 120 | MHz | High-speed mode | 38 |+| Flash interface clock (FCLK), high-speed mode | | | | 60 | MHz | High-speed mode | 38 |+| External bus clock (BCLK), high-speed mode | | | | 120 | MHz | High-speed mode | 38 |+| Main clock oscillator frequency | fMAIN | 8 | | 24 | MHz | | 40 |+| PLL clock frequency | fPLL | 120 | | 240 | MHz | | 40 |+| HOCO oscillation frequency fHOCO16 (without FLL) | fHOCO16 | 15.78 | 16 | 16.22 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |+| HOCO oscillation frequency fHOCO18 (without FLL) | fHOCO18 | 17.75 | 18 | 18.25 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |+| HOCO oscillation frequency fHOCO20 (without FLL) | fHOCO20 | 19.72 | 20 | 20.28 | MHz | Without FLL, -20 ≤ Ta ≤ 105 °C | 40 |+| LOCO clock oscillation frequency | fLOCO | 27.8528 | 32.768 | 37.6832 | kHz | | 40 |+| MOCO clock oscillation frequency | FMOCO | 6.8 | 8 | 9.2 | MHz | | 40 |+| RES pulse width, power-on | tRESWP | 1 | | | ms | Power-on, Figure 2.13 | 43 |+| Recovery time from Deep Software Standby mode | tDSBY | | 0.65 | 1 | ms | Figure 2.16 | 43 |+| I/O port input data pulse width | tPRW | 1.5 | | | tPcyc | Figure 2.34 | 61 |+| SCI receive data setup time (clock synchronous) | tRXS | 15 | | | ns | Clock synchronous mode, Figure 2.44 | 64 |+| SCI receive data hold time (clock synchronous) | tRXH | 5 | | | ns | Clock synchronous mode, Figure 2.44 | 64 |+| SPI simple mode data input setup time | tSU | 33.3 | | | ns | Simple SPI mode, Figure 2.46 to 2.49 | 65 |+| SPI simple mode data input hold time | tH | 33.3 | | | ns | Simple SPI mode, Figure 2.46 to 2.49 | 65 |+| System supply voltage (digital ground) | VSS | | 0 | | V | | 30 | ## Materials and finish @@ -203,8 +198,8 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/dst/ra6m3-group-datasheet) (115 pp, sha256 `61df63b02547f21b`, retrieved 2026-11-16, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/dst/ra6m3-group-datasheet) (115 pp, sha256 `61df63b02547f21b`, retrieved 2026-11-20)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/r7fa6m3ah3cfp-aa0-datasheet.pdf)
package.json+827−109@@ -1,6 +1,6 @@ { "slug": "r7fa6m3ah3cfp-aa0",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "RENESAS Pre-ordered MCUs, QFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "968-7FA6M3AH3CFP#AA0" }, "distributor_check": {- "checked_at": "2026-11-16T18:54:11Z",+ "checked_at": "2026-11-20T11:38:41Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "559-R7FA6M3AH3CFP#AA0-ND",@@ -69,511 +69,511 @@ "number": "1", "name": "P400", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ0, AGTIO1, GTIOC6A, SCK4, ET0_WOL."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ0, AGTIO1, GTIOC6A and AUDIO_CLK per the pin list." }, { "number": "2", "name": "P401", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ5, GTETRGA, GTIOC6B, CTX0, TXD7/MOSI7/SDA7."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ5-DS, GTETRGA, GTIOC6B and CTX0." }, { "number": "3", "name": "P402", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ4, CACREF, AGTIO0/AGTIO1, RTCIC0, CRX0."+ "description": "General-purpose I/O port; alternate functions include CACREF, IRQ4-DS, AGTIO0/AGTIO1, RTCIC0 and CRX0." }, { "number": "4", "name": "P403", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates AGTIO0/AGTIO1, GTIOC3A, RTCIC1, CTS7_RTS7/SS7."+ "description": "General-purpose I/O port; alternate functions include AGTIO0/AGTIO1, GTIOC3A, RTCIC1 and CTS7_RTS7/SS7." }, { "number": "5", "name": "P404", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC3B, RTCIC2, SSILRCK0/SSIFS0_A, ET0_EXOUT."+ "description": "General-purpose I/O port; alternate functions include GTIOC3B, RTCIC2 and SSILRCK0/SSIFS0_A." }, { "number": "6", "name": "P405", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC1A, SSITXD0_A, ET0_TX_EN, RMII0_TXD_EN_B."+ "description": "General-purpose I/O port; alternate functions include GTIOC1A, SSITXD0_A, ET0_TX_EN and PIXD5." }, { "number": "7", "name": "P406", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC1B, SSLB3_C, SSIRXD0_A, ET0_RX_ER."+ "description": "General-purpose I/O port; alternate functions include GTIOC1B, SSLB3_C, SSIRXD0_A and ET0_RX_ER." }, { "number": "8", "name": "VBATT", "type": "power_in",- "description": "Backup power supply pin for the RTC, sub-clock oscillator and backup area; VBATT is 1.65 to 3.6 V (Table 2.2)."+ "description": "Backup power pin for the battery backup area (RTC, sub-clock oscillator, backup registers); VBATT is specified at 1.65 to 3.6 V." }, { "number": "9", "name": "VCL0", "type": "passive",- "description": "Connect to VSS through a 0.1 µF smoothing capacitor placed close to the pin to stabilize the internal power supply."+ "description": "Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL0 pin to stabilize the internal power supply." }, { "number": "10", "name": "XCIN", "type": "input",- "description": "Sub-clock oscillator input; a 32.768 kHz crystal is connected between XCOUT and XCIN."+ "description": "Input pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN." }, { "number": "11", "name": "XCOUT", "type": "output",- "description": "Sub-clock oscillator output; a 32.768 kHz crystal is connected between XCOUT and XCIN."+ "description": "Output pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN." }, { "number": "12", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "13", "name": "P213/XTAL", "type": "output",- "description": "Crystal resonator output for the main clock oscillator (8 to 24 MHz); the same pin also provides IRQ2, GTETRGC, GTIOC0A and TXD1/MOSI1/SDA1."+ "description": "Crystal resonator output pin of the main clock oscillator (8 to 24 MHz); shares port P213 with IRQ2 and GTIOC0A." }, { "number": "14", "name": "P212/EXTAL", "type": "input",- "description": "External clock input or crystal input for the main clock oscillator (8 to 24 MHz); the same pin also provides IRQ3, AGTEE1, GTETRGD and GTIOC0B."+ "description": "External clock input pin of the main clock oscillator (or crystal input); shares port P212 with IRQ3, AGTEE1 and GTIOC0B." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "16", "name": "P708", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ11, RXD1/MISO1/SCL1, SSLA3_B, ET0_ETXD3, TS12."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ11, RXD1/MISO1/SCL1, SSLA3_B and TS12." }, { "number": "17", "name": "P415", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ8, GTIOC0A, USB_VBUSEN, SD0CD_A, TS11."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ8, GTIOC0A, USB_VBUSEN and ET0_TX_EN." }, { "number": "18", "name": "P414", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ9, GTIOC0B, SSLA1_B, SD0WP_A, TS10."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ9, GTIOC0B, SSLA1_B and ET0_RX_ER." }, { "number": "19", "name": "P413", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates GTOUUP, CTS0_RTS0/SS0, SSLA0_B, SD0CLK_A, TS09."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include GTOUUP, CTS0_RTS0/SS0, SSLA0_B and ET0_ETXD1." }, { "number": "20", "name": "P412", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTEE1, GTOULO, SCK0, RSPCKA_B, SD0CMD_A, TS08."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include AGTEE1, GTOULO, SCK0 and RSPCKA_B." }, { "number": "21", "name": "P411", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTOA1, GTOVUP, GTIOC9A, TXD0/MOSI0/SDA0, SD0DAT0_A, TS07."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ4, AGTOA1, GTOVUP, GTIOC9A and TXD0/MOSI0/SDA0." }, { "number": "22", "name": "P410", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTOB1, GTOVLO, GTIOC9B, RXD0/MISO0/SCL0, SD0DAT1_A, TS06."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ5, AGTOB1, GTOVLO, GTIOC9B and RXD0/MISO0/SCL0." }, { "number": "23", "name": "P409", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN, TS05."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN and TXD3/MOSI3/SDA3." }, { "number": "24", "name": "P408", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ7, GTOWLO, GTIOC10B, USBHS_ID, TS04."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ7, GTOWLO, GTIOC10B, USBHS_ID and ET0_CRS." }, { "number": "25", "name": "P407", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTIO0, RTCOUT, USB_VBUS, CTS4_RTS4/SS4, ADTRG0, TS03."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include AGTIO0, RTCOUT, CTS4_RTS4/SS4 and ADTRG0." }, { "number": "26", "name": "VSS_USB", "type": "power_in",- "description": "Ground pin for the USB on-chip transceiver; connect to the system ground at 0 V."+ "description": "Ground pin for the USB (USBFS) transceiver; connect to the system ground (0 V)." }, { "number": "27", "name": "USB_DM", "type": "bidirectional",- "description": "USB D- I/O pin of the USB Full-Speed on-chip transceiver; connect to the D- line of the USB bus."+ "description": "D- I/O pin of the USBFS on-chip transceiver; connect to the D- pin of the USB bus." }, { "number": "28", "name": "USB_DP", "type": "bidirectional",- "description": "USB D+ I/O pin of the USB Full-Speed on-chip transceiver; connect to the D+ line of the USB bus."+ "description": "D+ I/O pin of the USBFS on-chip transceiver; connect to the D+ pin of the USB bus." }, { "number": "29", "name": "VCC_USB", "type": "power_in",- "description": "USB power supply pin; must be supplied at the same voltage as VCC (Table 2.2)."+ "description": "USB power supply pin; connect to VCC (Note 2, p.30)." }, { "number": "30", "name": "P207", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates SSLB2_A/QSSL, TS02, LCD_DATA23_B."+ "description": "General-purpose I/O port; alternate functions include A17, SSLB2_A/QSSL, TS02 and LCD_DATA23_B." }, { "number": "31", "name": "P206", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ0, WAIT, GTIU, USB_VBUSEN, RXD4/MISO4/SCL4, TS01."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include WAIT, GTIU, USB_VBUSEN and ET0_LINKSTA." }, { "number": "32", "name": "P205", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ1, A16, AGTO1, GTIV, GTIOC4A, TXD4/MOSI4/SDA4, and CLKOUT."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include CLKOUT, IRQ1-DS, GTIV, GTIOC4A and USB_OVRCURA." }, { "number": "33", "name": "P214", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TCLK, GTIU, QSPCLK, ET0_MDC, SD0CLK_B, LCD_DATA22_B."+ "description": "General-purpose I/O port; alternate functions include TCLK, GTIU, QSPCLK and ET0_MDC." }, { "number": "34", "name": "P211", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA0, GTIV, QIO0, ET0_MDIO, SD0CMD_B, LCD_DATA21_B."+ "description": "General-purpose I/O port; alternate functions include TDATA0, GTIV, QIO0 and ET0_MDIO." }, { "number": "35", "name": "P210", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA1, GTIW, QIO1, ET0_WOL, SD0CD_B, LCD_DATA20_B."+ "description": "General-purpose I/O port; alternate functions include TDATA1, GTIW, QIO1 and ET0_WOL." }, { "number": "36", "name": "P209", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA2, GTOVUP, QIO2, ET0_EXOUT, SD0WP_B, LCD_DATA19_B."+ "description": "General-purpose I/O port; alternate functions include TDATA2, GTOVUP, QIO2 and ET0_EXOUT." }, { "number": "37", "name": "P208", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA3, GTOVLO, QIO3, ET0_LINKSTA, SD0DAT0_B, LCD_DATA18_B."+ "description": "General-purpose I/O port; alternate functions include TDATA3, GTOVLO, QIO3 and ET0_LINKSTA." }, { "number": "38", "name": "RES", "type": "input",- "description": "Reset input; the MCU enters the reset state when this pin goes low, with a minimum pulse width of 200 µs in normal operation (Table 2.15)."+ "description": "Reset signal input; the MCU enters the reset state when this pin goes low." }, { "number": "39", "name": "P201/MD",- "type": "bidirectional",- "description": "General-purpose I/O port P201; MD is the operating-mode select pin whose level must not change during operating-mode transition on release from reset."+ "type": "input",+ "description": "Operating mode control pin (MD); its level must not change during operating mode transition on release from reset; shares port P201." }, { "number": "40", "name": "P200", "type": "input",- "description": "Input-only port P200; NMI is the non-maskable interrupt request input, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only port P200, also the non-maskable interrupt request input (NMI)." }, { "number": "41", "name": "P307", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A12, GTOUUP, CTS6, QIO0, LCD_DATA19_A."+ "description": "General-purpose I/O port; alternate functions include A12, GTOUUP, CTS6 and QIO0." }, { "number": "42", "name": "P306", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A11, GTOULO, SCK6, QSSL, LCD_DATA18_A."+ "description": "General-purpose I/O port; alternate functions include A11, GTOULO, SCK6 and QSSL." }, { "number": "43", "name": "P305", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ8, A10, GTOWUP, TXD6/MOSI6/SDA6, QSPCLK, LCD_DATA17_A."+ "description": "General-purpose I/O port; alternate functions include IRQ8, A10, GTOWUP and TXD6/MOSI6/SDA6." }, { "number": "44", "name": "P304", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ9, A09, GTOWLO, GTIOC7A, RXD6/MISO6/SCL6, LCD_DATA16_A."+ "description": "General-purpose I/O port; alternate functions include IRQ9, A09, GTOWLO, GTIOC7A and RXD6/MISO6/SCL6." }, { "number": "45", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "46", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "47", "name": "P303", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A08, GTIOC7B, LCD_DATA15_A."+ "description": "General-purpose I/O port; alternate functions include A08, GTIOC7B and LCD_DATA15_A." }, { "number": "48", "name": "P302", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ5, A07, GTOUUP, GTIOC4A, TXD2/MOSI2/SDA2, SSLB3_B, LCD_DATA14_A."+ "description": "General-purpose I/O port; alternate functions include IRQ5, A07, GTOUUP, GTIOC4A and TXD2/MOSI2/SDA2." }, { "number": "49", "name": "P301", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ6, A06, AGTIO0, GTOULO, GTIOC4B, RXD2/MISO2/SCL2, LCD_DATA13_A."+ "description": "General-purpose I/O port; alternate functions include AGTIO0, A06, GTOULO, GTIOC4B and RXD2/MISO2/SCL2." }, { "number": "50", "name": "P300/TCK/SWCLK", "type": "input",- "description": "JTAG test clock input TCK, also the SWCLK serial-wire clock input; minimum TCK cycle time is 40 ns (Table 2.56)."+ "description": "JTAG TCK / serial wire SWCLK clock input; shares port P300 (GTIOC0A_A, GTOUUP)." }, { "number": "51", "name": "P108/TMS/SWDIO", "type": "bidirectional",- "description": "JTAG mode select input TMS and SWDIO serial-wire data I/O; SWDIO setup and hold times are minimum 8 ns (Table 2.57)."+ "description": "JTAG TMS / serial wire SWDIO data input/output; shares port P108 (GTOULO, GTIOC0B_A)." }, { "number": "52",- "name": "P109/TDO",+ "name": "P109/TDO/SWO", "type": "output",- "description": "JTAG test data output TDO, also the SWO serial-wire trace output; TDO data delay is maximum 20 ns (Table 2.56)."+ "description": "JTAG TDO / serial wire trace output (SWO); shares port P109 (CLKOUT, GTOVUP, GTIOC1A_A, CTX1)." }, { "number": "53", "name": "P110/TDI", "type": "input",- "description": "JTAG test data input TDI; setup and hold times are minimum 8 ns (Table 2.56)."+ "description": "JTAG TDI data input; shares port P110 (IRQ3, GTOVLO, GTIOC1B_A, CRX1)." }, { "number": "54", "name": "P111", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ4, A05, GTIOC3A_A, SCK2, SCK9, LCD_DATA12_A."+ "description": "General-purpose I/O port; alternate functions include IRQ4, A05, GTIOC3A_A and SCK2." }, { "number": "55", "name": "P112", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A04, GTIOC3B_A, TXD2/MOSI2/SDA2, SCK1, SSLB0_B, LCD_DATA11_A."+ "description": "General-purpose I/O port; alternate functions include A04, GTIOC3B_A, TXD2/MOSI2/SDA2 and SSIBCK0_B." }, { "number": "56", "name": "P113", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A03, GTIOC2A, RXD2/MISO2/SCL2, SSILRCK0/SSIFS0_B, LCD_DATA10_A."+ "description": "General-purpose I/O port; alternate functions include A03, GTIOC2A, RXD2/MISO2/SCL2 and SSILRCK0/SSIFS0_B." }, { "number": "57", "name": "P114", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A02, GTIOC2B, SSIRXD0_B, LCD_DATA09_A."+ "description": "General-purpose I/O port; alternate functions include A02, GTIOC2B and SSIRXD0_B." }, { "number": "58", "name": "P115", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A01, GTIOC4A, SSITXD0_B, LCD_DATA08_A."+ "description": "General-purpose I/O port; alternate functions include A01, GTIOC4A and SSITXD0_B." }, { "number": "59", "name": "P608", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A00/BC0, A00/DQM1, GTIOC4B, LCD_DATA07_A."+ "description": "General-purpose I/O port; alternate functions include A00/BC0, GTIOC4B and LCD_DATA07_A." }, { "number": "60", "name": "P609", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates CS1, CKE, GTIOC5A, CTX1, LCD_DATA06_A."+ "description": "General-purpose I/O port; alternate functions include CS1, CKE, GTIOC5A and CTX1." }, { "number": "61", "name": "P610", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates CS0, WE, GTIOC5B, CRX1, LCD_DATA05_A."+ "description": "General-purpose I/O port; alternate functions include CS0, WE, GTIOC5B and CRX1." }, { "number": "62", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "63", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "64", "name": "VCL", "type": "passive",- "description": "Connect to VSS through a 0.1 µF smoothing capacitor placed close to the pin to stabilize the internal power supply."+ "description": "Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL pin to stabilize the internal power supply." }, { "number": "65", "name": "P602", "type": "bidirectional",- "description": "I/O port with high-drive capability (20 mA average / 40 mA max per pin, Table 2.5); alternates EBCLK, SDCLK, GTIOC7B, TXD9, LCD_DATA04_A."+ "description": "General-purpose I/O port; alternate functions include EBCLK, SDCLK, GTIOC7B and TXD9." }, { "number": "66", "name": "P601", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates WR/WR0, DQM0, GTIOC6A, RXD9, LCD_DATA03_A."+ "description": "General-purpose I/O port; alternate functions include WR/WR0, DQM0, GTIOC6A and RXD9." }, { "number": "67", "name": "P600", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates RD, GTIOC6B, SCK9, LCD_DATA02_A, and CLKOUT/CACREF."+ "description": "General-purpose I/O port; alternate functions include RD, GTIOC6B, SCK9 and CLKOUT." }, { "number": "68", "name": "P107", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR07, D07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8, LCD_DATA01_A."+ "description": "General-purpose I/O port; alternate functions include D07/A07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8 and KR07." }, { "number": "69", "name": "P106", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR06, D06, AGTOB0, GTIOC8B, SCK8, SSLA3_A, LCD_DATA00_A."+ "description": "General-purpose I/O port; alternate functions include D06/A06, AGTOB0, GTIOC8B, SCK8 and KR06." }, { "number": "70", "name": "P105", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ0/KR05, D05, GTETRGA, GTIOC1A, TXD8/MOSI8/SDA8, LCD_TCON3_A."+ "description": "General-purpose I/O port; alternate functions include IRQ0/KR05, D05/A05, GTETRGA, GTIOC1A and TXD8/MOSI8/SDA8." }, { "number": "71", "name": "P104", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ1/KR04, D04, GTETRGB, GTIOC1B, RXD8/MISO8/SCL8, LCD_TCON2_A."+ "description": "General-purpose I/O port; alternate functions include IRQ1/KR04, D04/A04, GTETRGB, GTIOC1B and RXD8/MISO8/SCL8." }, { "number": "72", "name": "P103", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR03, D03, GTOWUP, GTIOC2A_A, CTX0, CTS0_RTS0/SS0, LCD_TCON1_A."+ "description": "General-purpose I/O port; alternate functions include KR03, D03/A03, GTOWUP, GTIOC2A_A and CTX0." }, { "number": "73", "name": "P102", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR02, D02, AGTO0, GTOWLO, GTIOC2B_A, CRX0, SCK0, ADTRG0, LCD_TCON0_A."+ "description": "General-purpose I/O port; alternate functions include KR02, D02/A02, AGTO0, GTOWLO and CRX0." }, { "number": "74", "name": "P101", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR01, D01, AGTEE0, GTETRGB, GTIOC5A, TXD0/MOSI0/SDA0, CTS1_RTS1/SS1."+ "description": "General-purpose I/O port; alternate functions include IRQ1/KR01, D01/A01, AGTEE0, GTETRGB and GTIOC5A." }, { "number": "75", "name": "P100", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ2/KR00, D00, AGTIO0, GTETRGA, GTIOC5B, RXD0/MISO0/SCL0, LCD_EXTCLK_A."+ "description": "General-purpose I/O port; alternate functions include IRQ2/KR00, D00/A00, AGTIO0, GTETRGA and GTIOC5B." }, { "number": "76", "name": "P500", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates AGTOA0, GTIU, GTIOC11A, USB_VBUSEN, QSPCLK, SD1CLK_A, AN016, IVREF0."+ "description": "General-purpose I/O port; alternate functions include AGTOA0, GTIU, GTIOC11A, QSPCLK and analog input AN016." }, { "number": "77", "name": "P501", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ11, AGTOB0, GTIV, GTIOC11B, USB_OVRCURA, TXD5/MOSI5/SDA5, QSSL, AN116, IVREF1."+ "description": "General-purpose I/O port; alternate functions include IRQ11, AGTOB0, GTIV, GTIOC11B and analog input AN116." }, { "number": "78", "name": "P502", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ12, GTIW, GTIOC12A, USB_OVRCURB, RXD5/MISO5/SCL5, QIO0, AN017, IVCMP0."+ "description": "General-purpose I/O port; alternate functions include IRQ12, GTIW, GTIOC12A, QIO0 and analog input AN017." }, { "number": "79", "name": "P503", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTETRGC, GTIOC12B, USB_EXICEN, CTS6_RTS6/SS6, SCK5, QIO1, AN117."+ "description": "General-purpose I/O port; alternate functions include GTETRGC, GTIOC12B, CTS6_RTS6/SS6 and analog input AN117." }, { "number": "80", "name": "P504", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates ALE, GTETRGD, GTIOC13A, USB_ID, SCK6, CTS5_RTS5/SS5, QIO2, AN018."+ "description": "General-purpose I/O port; alternate functions include ALE, GTETRGD, GTIOC13A, SCK6 and analog input AN018." }, { "number": "81", "name": "P508", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates SCK6, SCK5 and ADC12 analog input AN020."+ "description": "General-purpose I/O port; alternate functions include SCK6, SCK5 and analog input AN020." }, { "number": "82", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "83", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "84", "name": "P015", "type": "bidirectional",- "description": "I/O port with 4 mA average / 8 mA max output current per pin (Table 2.5); alternates IRQ13, AN006/AN106, DA1/IVCMP1."+ "description": "General-purpose I/O port (IRQ13); analog input AN006/AN106 and D/A output DA1 or comparator input IVCMP1 per the pin list." }, { "number": "85", "name": "P014", "type": "bidirectional",- "description": "I/O port with 4 mA average / 8 mA max output current per pin (Table 2.5); alternates IRQ... AN005/AN105 and DA0/IVREF3."+ "description": "General-purpose I/O port; analog input AN005/AN105 and D/A output DA0 or comparator reference IVREF3 per the pin list." }, { "number": "86",@@ -591,13 +591,13 @@ "number": "88", "name": "AVCC0", "type": "power_in",- "description": "Analog power supply for the ADC12 and PGA; supply at the same voltage as VCC (Table 2.2)."+ "description": "Analog power supply for the ADC12, comparator and PGA; supply at the same voltage as VCC (Note 2, p.30)." }, { "number": "89", "name": "AVSS0", "type": "power_in",- "description": "Analog ground for the ADC12 and PGA; supply at the same voltage as VSS (0 V)."+ "description": "Analog ground for the ADC12, comparator and PGA; supply at the same voltage as VSS." }, { "number": "90",@@ -609,61 +609,61 @@ "number": "91", "name": "VREFH0", "type": "power_in",- "description": "Analog reference voltage supply for the ADC12 unit 0; must satisfy 2.7 V ≤ VREFH0 ≤ AVCC0 and be connected to VCC when not used."+ "description": "Analog reference voltage supply for the ADC12 unit 0, with 2.7 V <= VREFH0 <= AVCC0; connect to VCC when not used." }, { "number": "92", "name": "P008", "type": "bidirectional",- "description": "I/O port with 2 mA average / 4 mA max output current per pin (Table 2.5); alternates IRQ12-DS and ADC12 analog input AN003."+ "description": "General-purpose I/O port; alternate functions include IRQ12-DS and analog input AN003." }, { "number": "93", "name": "P007", "type": "input",- "description": "Input-only port P007; alternates PGAVSS100/AN107 analog functions, with input leakage up to 45 µA before initialization (Table 2.6)."+ "description": "Input-only general-purpose port; the pin is also PGAVSS100/AN107 for the PGA differential input." }, { "number": "94", "name": "P006", "type": "input",- "description": "Input-only port P006; alternates IRQ11-DS, AN102 and IVCMP2, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ11-DS, analog input AN102 and comparator input IVCMP2." }, { "number": "95", "name": "P005", "type": "input",- "description": "Input-only port P005; alternates IRQ10-DS and AN101, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ10-DS, analog input AN101 and comparator input IVCMP2." }, { "number": "96", "name": "P004", "type": "input",- "description": "Input-only port P004; alternates IRQ9-DS and AN100, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ9-DS, analog input AN100 and comparator input IVCMP2." }, { "number": "97", "name": "P003", "type": "input",- "description": "Input-only port P003; alternates PGAVSS000/AN007 analog functions, with input leakage up to 45 µA before initialization (Table 2.6)."+ "description": "Input-only general-purpose port; the pin is also PGAVSS000/AN007 for the PGA differential input." }, { "number": "98", "name": "P002", "type": "input",- "description": "Input-only port P002; alternates IRQ8-DS and AN002, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ8-DS, analog input AN002 and comparator input IVCMP2." }, { "number": "99", "name": "P001", "type": "input",- "description": "Input-only port P001; alternates IRQ7-DS and AN001, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ7-DS, analog input AN001 and comparator input IVCMP2." }, { "number": "100", "name": "P000", "type": "input",- "description": "Input-only port P000; alternates IRQ6-DS and AN000, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ6-DS, analog input AN000 and comparator input IVCMP2." } ], "provenance": {@@ -673,21 +673,23 @@ "extractor": "extract_pins 0.3", "primary_model": "claude-haiku-5-5", "primary_mode": "text",- "consensus_model": "claude-opus-5-5",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet names VCL0/VCL only as a 0.1 µF stabilization capacitor connection with no direction s; P213/XTAL is typed output and P212/EXTAL input per Table 1.17 (XTAL Output, EXTAL Input); the pin li; P201/MD and P200/NMI are multi-function pins; typed bidirectional and input respectively based on th"+ "extractor flagged: Pin numbering was taken from the LQFP100 column of the pin list (Section 1.7, pp.24-28), not from th; Shared debug, mode and oscillator pins were typed by their dedicated function, not by the port I/O c; Ports P202, P203, P204, P311-P315, P511-P513, P700-P713 (except the pins listed), PB00, PB01, P800-P",+ "8/100 pins cited to the wrong page (name found elsewhere): ['38:RES@p13', '39:P201/MD@p13', '86:VREFL@p17', '87:VREFH@p17']" ], "pages_sent": 115,- "cost_usd": 0.6541,- "at": "2026-11-16T18:53:45"+ "cost_usd": 0.7693,+ "at": "2026-11-20T11:38:23" }, "datasheet": { "url": "https://www.renesas.com/us/en/document/dst/ra6m3-group-datasheet", "pages": 115, "sha256": "61df63b02547f21b",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "RENESAS datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -718,7 +720,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",- "checked": "2026-11-16",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -736,8 +738,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "bfae78ddf3f13723798b6f10b232d2f24cee13333b3476f7dd9b9ca1e964bdf4",- "checked": "2026-11-16",+ "sha256": "5d3beb15d456d401f7e2711c018519bb7f8ee4d93d2a4ee95218cdf7df30eb53",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -789,5 +791,721 @@ "by": "factory/package_fit.py" } }+ },+ "metadata": {+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "rows": [+ {+ "name": "Power supply voltage",+ "symbol": "VCC, VCC_USB",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 4,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "VBATT power supply voltage",+ "symbol": "VBATT",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 4,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Input voltage (except 5 V-tolerant ports)",+ "symbol": "Vin",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Input voltage (5 V-tolerant ports)",+ "symbol": "Vin",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Reference power supply voltage",+ "symbol": "VREFH/VREFH0",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Analog power supply voltage",+ "symbol": "AVCC0",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 4,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Operating temperature (-40 to +85 °C product)",+ "symbol": "Topr",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 85,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Operating temperature (-40 to +105 °C product)",+ "symbol": "Topr",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 105,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Storage temperature",+ "symbol": "Tstg",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -55,+ "typ": null,+ "max": 125,+ "conditions": "",+ "source_page": 29,+ "source": "datasheet"+ },+ {+ "name": "Power supply voltage (USB/SDRAM not used)",+ "symbol": "VCC",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 2.7,+ "typ": null,+ "max": 3.6,+ "conditions": "When USB/SDRAM is not used",+ "source_page": 30,+ "source": "datasheet"+ },+ {+ "name": "Power supply voltage (USB/SDRAM used)",+ "symbol": "VCC",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 3,+ "typ": null,+ "max": 3.6,+ "conditions": "When USB/SDRAM is used",+ "source_page": 30,+ "source": "datasheet"+ },+ {+ "name": "VBATT power supply voltage",+ "symbol": "VBATT",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 1.65,+ "typ": null,+ "max": 3.6,+ "conditions": "",+ "source_page": 30,+ "source": "datasheet"+ },+ {+ "name": "Permissible junction temperature",+ "symbol": "Tj",+ "kind": "electrical",+ "unit": "°C",+ "min": null,+ "typ": null,+ "max": 125,+ "conditions": "High-speed mode, Low-speed mode",+ "source_page": 30,+ "source": "datasheet"+ },+ {+ "name": "Permissible junction temperature",+ "symbol": "Tj",+ "kind": "electrical",+ "unit": "°C",+ "min": null,+ "typ": null,+ "max": 105,+ "conditions": "Subosc-speed mode",+ "source_page": 30,+ "source": "datasheet"+ },+ {+ "name": "Input high voltage, ETHERC",+ "symbol": "VIH",+ "kind": "electrical",+ "unit": "V",+ "min": 2.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 31,+ "source": "datasheet"+ },+ {+ "name": "Input high voltage, IIC (SMBus) *1",+ "symbol": "VIH",+ "kind": "electrical",+ "unit": "V",+ "min": 2.1,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 31,+ "source": "datasheet"+ },+ {+ "name": "Input low voltage, IIC (SMBus) *1",+ "symbol": "VIL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -0.8,+ "conditions": "",+ "source_page": 31,+ "source": "datasheet"+ },+ {+ "name": "Input high voltage, IIC (SMBus) *2",+ "symbol": "VIH",+ "kind": "electrical",+ "unit": "V",+ "min": 2.1,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 31,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), ports P008 to P010, P201",+ "symbol": "IOH",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -2,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), ports P008 to P010, P201",+ "symbol": "IOL",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 2,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), ports P014, P015",+ "symbol": "IOH",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -4,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), ports P014, P015",+ "symbol": "IOL",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 4,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), 19-pin ports, high drive",+ "symbol": "IOH",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -20,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), 19-pin ports, high drive",+ "symbol": "IOL",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 20,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), other output pins, high drive",+ "symbol": "IOH",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -16,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (average per pin), other output pins, high drive",+ "symbol": "IOL",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 16,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (max per pin), 19-pin ports, high drive",+ "symbol": "IOH",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -40,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (max per pin), 19-pin ports, high drive",+ "symbol": "IOL",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 40,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (max per pin), other output pins, high drive",+ "symbol": "IOH",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -32,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (max per pin), other output pins, high drive",+ "symbol": "IOL",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 32,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (max total, all output pins)",+ "symbol": "ΣIOH (max)",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": -80,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Permissible output current (max total, all output pins)",+ "symbol": "ΣIOL (max)",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 80,+ "conditions": "",+ "source_page": 32,+ "source": "datasheet"+ },+ {+ "name": "Output voltage, IIC",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -0.4,+ "conditions": "IOL = 3.0 mA",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Output voltage, IIC",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -0.6,+ "conditions": "IOL = 6.0 mA",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Output voltage, IIC*1",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -0.4,+ "conditions": "IOL = 15.0 mA (ICFER.FMPE = 1)",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Output voltage, ETHERC",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -0.4,+ "conditions": "IOL = 1.0 mA",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Output voltage, ports P205, P206, P407 to P415, P602, P708 to P713, PB01 (19 pins)",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -1,+ "conditions": "IOL = 20 mA, VCC = 3.3 V",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Output voltage, other output pins",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": -0.5,+ "conditions": "IOL = 1.0 mA",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input leakage current, RES",+ "symbol": "|Iin|",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": null,+ "max": -5,+ "conditions": "Vin = 0 V, Vin = 5.5 V",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input leakage current, ports P000 to P002, P004 to P006, P200",+ "symbol": "Iin",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": null,+ "max": 1,+ "conditions": "Vin = 0 V, Vin = VCC",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input leakage current, ports P003, P007 before initialization",+ "symbol": "Iin",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": null,+ "max": -45,+ "conditions": "Vin = 0 V, Vin = VCC",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input leakage current, ports P003, P007 after initialization",+ "symbol": "Iin",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": null,+ "max": -1,+ "conditions": "Vin = 0 V, Vin = VCC",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Three-state leakage current, 5 V-tolerant ports",+ "symbol": "|ITSI|",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": null,+ "max": 5,+ "conditions": "Vin = 0 V, Vin = 5.5 V",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Three-state leakage current, other ports (except P000 to P007, P200)",+ "symbol": "ITSI",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": null,+ "max": 1,+ "conditions": "Vin = 0 V, Vin = VCC",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input pull-up MOS current, ports P0 to PB (except P000 to P007)",+ "symbol": "Ip",+ "kind": "electrical",+ "unit": "μA",+ "min": -300,+ "typ": null,+ "max": -10,+ "conditions": "VCC = 2.7 to 3.6 V, Vin = 0 V",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input capacitance, USB_DP, USB_DM, ports P003, P007, P014, P015, P400, P401, P511, P512",+ "symbol": "Cin",+ "kind": "electrical",+ "unit": "pF",+ "min": null,+ "typ": null,+ "max": 16,+ "conditions": "Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Input capacitance, other input pins",+ "symbol": "Cin",+ "kind": "electrical",+ "unit": "pF",+ "min": null,+ "typ": null,+ "max": 8,+ "conditions": "Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25 °C",+ "source_page": 33,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, system clock (ICLK)",+ "symbol": "f",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 120,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, peripheral module clock (PCLKA)",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 120,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, peripheral module clock (PCLKB)",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 60,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, peripheral module clock (PCLKC)",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 60,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, peripheral module clock (PCLKD)",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 120,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, flash interface clock (FCLK)",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 60,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, external bus clock (BCLK)",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 120,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Operation frequency, EBCLK pin output",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 60,+ "conditions": "",+ "source_page": 38,+ "source": "datasheet"+ },+ {+ "name": "Supply current, high-speed mode maximum",+ "symbol": "ICC",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 137,+ "conditions": "ICLK = 120 MHz, PCLKA = 120 MHz, PCLKB = 60 MHz, PCLKC = 60 MHz, PCLKD = 120 MHz, FCLK = 60 MHz, BCLK = 120 MHz",+ "source_page": 34,+ "source": "datasheet"+ },+ {+ "name": "Supply current, sleep mode",+ "symbol": "ICC",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 46,+ "conditions": "Sleep mode",+ "source_page": 34,+ "source": "datasheet"+ },+ {+ "name": "Full-speed USB operating current",+ "symbol": "ICCUSBFS",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 10,+ "conditions": "VCC_USB",+ "source_page": 35,+ "source": "datasheet"+ },+ {+ "name": "Low-speed USB operating current",+ "symbol": "ICCUSBLS",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 6.5,+ "conditions": "VCC_USB",+ "source_page": 35,+ "source": "datasheet"+ }+ ]+ } } }
page.json+114−127@@ -4,7 +4,7 @@ "slug": "r7fa6m3ah3cfp-aa0", "title": "R7FA6M3AH3CFP#AA0", "brief": "RENESAS Pre-ordered MCUs, QFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "968-7FA6M3AH3CFP#AA0" }, "distributor_check": {- "checked_at": "2026-11-16T18:54:11Z",+ "checked_at": "2026-11-20T11:38:41Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "559-R7FA6M3AH3CFP#AA0-ND",@@ -52,511 +52,511 @@ "number": "1", "name": "P400", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ0, AGTIO1, GTIOC6A, SCK4, ET0_WOL."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ0, AGTIO1, GTIOC6A and AUDIO_CLK per the pin list." }, { "number": "2", "name": "P401", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ5, GTETRGA, GTIOC6B, CTX0, TXD7/MOSI7/SDA7."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ5-DS, GTETRGA, GTIOC6B and CTX0." }, { "number": "3", "name": "P402", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ4, CACREF, AGTIO0/AGTIO1, RTCIC0, CRX0."+ "description": "General-purpose I/O port; alternate functions include CACREF, IRQ4-DS, AGTIO0/AGTIO1, RTCIC0 and CRX0." }, { "number": "4", "name": "P403", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates AGTIO0/AGTIO1, GTIOC3A, RTCIC1, CTS7_RTS7/SS7."+ "description": "General-purpose I/O port; alternate functions include AGTIO0/AGTIO1, GTIOC3A, RTCIC1 and CTS7_RTS7/SS7." }, { "number": "5", "name": "P404", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC3B, RTCIC2, SSILRCK0/SSIFS0_A, ET0_EXOUT."+ "description": "General-purpose I/O port; alternate functions include GTIOC3B, RTCIC2 and SSILRCK0/SSIFS0_A." }, { "number": "6", "name": "P405", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC1A, SSITXD0_A, ET0_TX_EN, RMII0_TXD_EN_B."+ "description": "General-purpose I/O port; alternate functions include GTIOC1A, SSITXD0_A, ET0_TX_EN and PIXD5." }, { "number": "7", "name": "P406", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTIOC1B, SSLB3_C, SSIRXD0_A, ET0_RX_ER."+ "description": "General-purpose I/O port; alternate functions include GTIOC1B, SSLB3_C, SSIRXD0_A and ET0_RX_ER." }, { "number": "8", "name": "VBATT", "type": "power_in",- "description": "Backup power supply pin for the RTC, sub-clock oscillator and backup area; VBATT is 1.65 to 3.6 V (Table 2.2)."+ "description": "Backup power pin for the battery backup area (RTC, sub-clock oscillator, backup registers); VBATT is specified at 1.65 to 3.6 V." }, { "number": "9", "name": "VCL0", "type": "passive",- "description": "Connect to VSS through a 0.1 µF smoothing capacitor placed close to the pin to stabilize the internal power supply."+ "description": "Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL0 pin to stabilize the internal power supply." }, { "number": "10", "name": "XCIN", "type": "input",- "description": "Sub-clock oscillator input; a 32.768 kHz crystal is connected between XCOUT and XCIN."+ "description": "Input pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN." }, { "number": "11", "name": "XCOUT", "type": "output",- "description": "Sub-clock oscillator output; a 32.768 kHz crystal is connected between XCOUT and XCIN."+ "description": "Output pin of the sub-clock oscillator; connect a crystal resonator between XCOUT and XCIN." }, { "number": "12", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "13", "name": "P213/XTAL", "type": "output",- "description": "Crystal resonator output for the main clock oscillator (8 to 24 MHz); the same pin also provides IRQ2, GTETRGC, GTIOC0A and TXD1/MOSI1/SDA1."+ "description": "Crystal resonator output pin of the main clock oscillator (8 to 24 MHz); shares port P213 with IRQ2 and GTIOC0A." }, { "number": "14", "name": "P212/EXTAL", "type": "input",- "description": "External clock input or crystal input for the main clock oscillator (8 to 24 MHz); the same pin also provides IRQ3, AGTEE1, GTETRGD and GTIOC0B."+ "description": "External clock input pin of the main clock oscillator (or crystal input); shares port P212 with IRQ3, AGTEE1 and GTIOC0B." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "16", "name": "P708", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ11, RXD1/MISO1/SCL1, SSLA3_B, ET0_ETXD3, TS12."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ11, RXD1/MISO1/SCL1, SSLA3_B and TS12." }, { "number": "17", "name": "P415", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ8, GTIOC0A, USB_VBUSEN, SD0CD_A, TS11."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ8, GTIOC0A, USB_VBUSEN and ET0_TX_EN." }, { "number": "18", "name": "P414", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ9, GTIOC0B, SSLA1_B, SD0WP_A, TS10."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ9, GTIOC0B, SSLA1_B and ET0_RX_ER." }, { "number": "19", "name": "P413", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates GTOUUP, CTS0_RTS0/SS0, SSLA0_B, SD0CLK_A, TS09."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include GTOUUP, CTS0_RTS0/SS0, SSLA0_B and ET0_ETXD1." }, { "number": "20", "name": "P412", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTEE1, GTOULO, SCK0, RSPCKA_B, SD0CMD_A, TS08."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include AGTEE1, GTOULO, SCK0 and RSPCKA_B." }, { "number": "21", "name": "P411", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTOA1, GTOVUP, GTIOC9A, TXD0/MOSI0/SDA0, SD0DAT0_A, TS07."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ4, AGTOA1, GTOVUP, GTIOC9A and TXD0/MOSI0/SDA0." }, { "number": "22", "name": "P410", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTOB1, GTOVLO, GTIOC9B, RXD0/MISO0/SCL0, SD0DAT1_A, TS06."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ5, AGTOB1, GTOVLO, GTIOC9B and RXD0/MISO0/SCL0." }, { "number": "23", "name": "P409", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN, TS05."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ6, GTOWUP, GTIOC10A, USBHS_EXICEN and TXD3/MOSI3/SDA3." }, { "number": "24", "name": "P408", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ7, GTOWLO, GTIOC10B, USBHS_ID, TS04."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include IRQ7, GTOWLO, GTIOC10B, USBHS_ID and ET0_CRS." }, { "number": "25", "name": "P407", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates AGTIO0, RTCOUT, USB_VBUS, CTS4_RTS4/SS4, ADTRG0, TS03."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include AGTIO0, RTCOUT, CTS4_RTS4/SS4 and ADTRG0." }, { "number": "26", "name": "VSS_USB", "type": "power_in",- "description": "Ground pin for the USB on-chip transceiver; connect to the system ground at 0 V."+ "description": "Ground pin for the USB (USBFS) transceiver; connect to the system ground (0 V)." }, { "number": "27", "name": "USB_DM", "type": "bidirectional",- "description": "USB D- I/O pin of the USB Full-Speed on-chip transceiver; connect to the D- line of the USB bus."+ "description": "D- I/O pin of the USBFS on-chip transceiver; connect to the D- pin of the USB bus." }, { "number": "28", "name": "USB_DP", "type": "bidirectional",- "description": "USB D+ I/O pin of the USB Full-Speed on-chip transceiver; connect to the D+ line of the USB bus."+ "description": "D+ I/O pin of the USBFS on-chip transceiver; connect to the D+ pin of the USB bus." }, { "number": "29", "name": "VCC_USB", "type": "power_in",- "description": "USB power supply pin; must be supplied at the same voltage as VCC (Table 2.2)."+ "description": "USB power supply pin; connect to VCC (Note 2, p.30)." }, { "number": "30", "name": "P207", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates SSLB2_A/QSSL, TS02, LCD_DATA23_B."+ "description": "General-purpose I/O port; alternate functions include A17, SSLB2_A/QSSL, TS02 and LCD_DATA23_B." }, { "number": "31", "name": "P206", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ0, WAIT, GTIU, USB_VBUSEN, RXD4/MISO4/SCL4, TS01."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include WAIT, GTIU, USB_VBUSEN and ET0_LINKSTA." }, { "number": "32", "name": "P205", "type": "bidirectional",- "description": "5 V-tolerant I/O port; input up to VCC+3.6 V (max 5.8 V) and high-drive output 20 mA average / 40 mA max per pin; alternates IRQ1, A16, AGTO1, GTIV, GTIOC4A, TXD4/MOSI4/SDA4, and CLKOUT."+ "description": "5 V-tolerant general-purpose I/O port; alternate functions include CLKOUT, IRQ1-DS, GTIV, GTIOC4A and USB_OVRCURA." }, { "number": "33", "name": "P214", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TCLK, GTIU, QSPCLK, ET0_MDC, SD0CLK_B, LCD_DATA22_B."+ "description": "General-purpose I/O port; alternate functions include TCLK, GTIU, QSPCLK and ET0_MDC." }, { "number": "34", "name": "P211", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA0, GTIV, QIO0, ET0_MDIO, SD0CMD_B, LCD_DATA21_B."+ "description": "General-purpose I/O port; alternate functions include TDATA0, GTIV, QIO0 and ET0_MDIO." }, { "number": "35", "name": "P210", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA1, GTIW, QIO1, ET0_WOL, SD0CD_B, LCD_DATA20_B."+ "description": "General-purpose I/O port; alternate functions include TDATA1, GTIW, QIO1 and ET0_WOL." }, { "number": "36", "name": "P209", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA2, GTOVUP, QIO2, ET0_EXOUT, SD0WP_B, LCD_DATA19_B."+ "description": "General-purpose I/O port; alternate functions include TDATA2, GTOVUP, QIO2 and ET0_EXOUT." }, { "number": "37", "name": "P208", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates TDATA3, GTOVLO, QIO3, ET0_LINKSTA, SD0DAT0_B, LCD_DATA18_B."+ "description": "General-purpose I/O port; alternate functions include TDATA3, GTOVLO, QIO3 and ET0_LINKSTA." }, { "number": "38", "name": "RES", "type": "input",- "description": "Reset input; the MCU enters the reset state when this pin goes low, with a minimum pulse width of 200 µs in normal operation (Table 2.15)."+ "description": "Reset signal input; the MCU enters the reset state when this pin goes low." }, { "number": "39", "name": "P201/MD",- "type": "bidirectional",- "description": "General-purpose I/O port P201; MD is the operating-mode select pin whose level must not change during operating-mode transition on release from reset."+ "type": "input",+ "description": "Operating mode control pin (MD); its level must not change during operating mode transition on release from reset; shares port P201." }, { "number": "40", "name": "P200", "type": "input",- "description": "Input-only port P200; NMI is the non-maskable interrupt request input, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only port P200, also the non-maskable interrupt request input (NMI)." }, { "number": "41", "name": "P307", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A12, GTOUUP, CTS6, QIO0, LCD_DATA19_A."+ "description": "General-purpose I/O port; alternate functions include A12, GTOUUP, CTS6 and QIO0." }, { "number": "42", "name": "P306", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A11, GTOULO, SCK6, QSSL, LCD_DATA18_A."+ "description": "General-purpose I/O port; alternate functions include A11, GTOULO, SCK6 and QSSL." }, { "number": "43", "name": "P305", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ8, A10, GTOWUP, TXD6/MOSI6/SDA6, QSPCLK, LCD_DATA17_A."+ "description": "General-purpose I/O port; alternate functions include IRQ8, A10, GTOWUP and TXD6/MOSI6/SDA6." }, { "number": "44", "name": "P304", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ9, A09, GTOWLO, GTIOC7A, RXD6/MISO6/SCL6, LCD_DATA16_A."+ "description": "General-purpose I/O port; alternate functions include IRQ9, A09, GTOWLO, GTIOC7A and RXD6/MISO6/SCL6." }, { "number": "45", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "46", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "47", "name": "P303", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A08, GTIOC7B, LCD_DATA15_A."+ "description": "General-purpose I/O port; alternate functions include A08, GTIOC7B and LCD_DATA15_A." }, { "number": "48", "name": "P302", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ5, A07, GTOUUP, GTIOC4A, TXD2/MOSI2/SDA2, SSLB3_B, LCD_DATA14_A."+ "description": "General-purpose I/O port; alternate functions include IRQ5, A07, GTOUUP, GTIOC4A and TXD2/MOSI2/SDA2." }, { "number": "49", "name": "P301", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ6, A06, AGTIO0, GTOULO, GTIOC4B, RXD2/MISO2/SCL2, LCD_DATA13_A."+ "description": "General-purpose I/O port; alternate functions include AGTIO0, A06, GTOULO, GTIOC4B and RXD2/MISO2/SCL2." }, { "number": "50", "name": "P300/TCK/SWCLK", "type": "input",- "description": "JTAG test clock input TCK, also the SWCLK serial-wire clock input; minimum TCK cycle time is 40 ns (Table 2.56)."+ "description": "JTAG TCK / serial wire SWCLK clock input; shares port P300 (GTIOC0A_A, GTOUUP)." }, { "number": "51", "name": "P108/TMS/SWDIO", "type": "bidirectional",- "description": "JTAG mode select input TMS and SWDIO serial-wire data I/O; SWDIO setup and hold times are minimum 8 ns (Table 2.57)."+ "description": "JTAG TMS / serial wire SWDIO data input/output; shares port P108 (GTOULO, GTIOC0B_A)." }, { "number": "52",- "name": "P109/TDO",+ "name": "P109/TDO/SWO", "type": "output",- "description": "JTAG test data output TDO, also the SWO serial-wire trace output; TDO data delay is maximum 20 ns (Table 2.56)."+ "description": "JTAG TDO / serial wire trace output (SWO); shares port P109 (CLKOUT, GTOVUP, GTIOC1A_A, CTX1)." }, { "number": "53", "name": "P110/TDI", "type": "input",- "description": "JTAG test data input TDI; setup and hold times are minimum 8 ns (Table 2.56)."+ "description": "JTAG TDI data input; shares port P110 (IRQ3, GTOVLO, GTIOC1B_A, CRX1)." }, { "number": "54", "name": "P111", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ4, A05, GTIOC3A_A, SCK2, SCK9, LCD_DATA12_A."+ "description": "General-purpose I/O port; alternate functions include IRQ4, A05, GTIOC3A_A and SCK2." }, { "number": "55", "name": "P112", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A04, GTIOC3B_A, TXD2/MOSI2/SDA2, SCK1, SSLB0_B, LCD_DATA11_A."+ "description": "General-purpose I/O port; alternate functions include A04, GTIOC3B_A, TXD2/MOSI2/SDA2 and SSIBCK0_B." }, { "number": "56", "name": "P113", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A03, GTIOC2A, RXD2/MISO2/SCL2, SSILRCK0/SSIFS0_B, LCD_DATA10_A."+ "description": "General-purpose I/O port; alternate functions include A03, GTIOC2A, RXD2/MISO2/SCL2 and SSILRCK0/SSIFS0_B." }, { "number": "57", "name": "P114", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A02, GTIOC2B, SSIRXD0_B, LCD_DATA09_A."+ "description": "General-purpose I/O port; alternate functions include A02, GTIOC2B and SSIRXD0_B." }, { "number": "58", "name": "P115", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A01, GTIOC4A, SSITXD0_B, LCD_DATA08_A."+ "description": "General-purpose I/O port; alternate functions include A01, GTIOC4A and SSITXD0_B." }, { "number": "59", "name": "P608", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates A00/BC0, A00/DQM1, GTIOC4B, LCD_DATA07_A."+ "description": "General-purpose I/O port; alternate functions include A00/BC0, GTIOC4B and LCD_DATA07_A." }, { "number": "60", "name": "P609", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates CS1, CKE, GTIOC5A, CTX1, LCD_DATA06_A."+ "description": "General-purpose I/O port; alternate functions include CS1, CKE, GTIOC5A and CTX1." }, { "number": "61", "name": "P610", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates CS0, WE, GTIOC5B, CRX1, LCD_DATA05_A."+ "description": "General-purpose I/O port; alternate functions include CS0, WE, GTIOC5B and CRX1." }, { "number": "62", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "63", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "64", "name": "VCL", "type": "passive",- "description": "Connect to VSS through a 0.1 µF smoothing capacitor placed close to the pin to stabilize the internal power supply."+ "description": "Connect to VSS through a 0.1-uF smoothing capacitor close to the VCL pin to stabilize the internal power supply." }, { "number": "65", "name": "P602", "type": "bidirectional",- "description": "I/O port with high-drive capability (20 mA average / 40 mA max per pin, Table 2.5); alternates EBCLK, SDCLK, GTIOC7B, TXD9, LCD_DATA04_A."+ "description": "General-purpose I/O port; alternate functions include EBCLK, SDCLK, GTIOC7B and TXD9." }, { "number": "66", "name": "P601", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates WR/WR0, DQM0, GTIOC6A, RXD9, LCD_DATA03_A."+ "description": "General-purpose I/O port; alternate functions include WR/WR0, DQM0, GTIOC6A and RXD9." }, { "number": "67", "name": "P600", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates RD, GTIOC6B, SCK9, LCD_DATA02_A, and CLKOUT/CACREF."+ "description": "General-purpose I/O port; alternate functions include RD, GTIOC6B, SCK9 and CLKOUT." }, { "number": "68", "name": "P107", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR07, D07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8, LCD_DATA01_A."+ "description": "General-purpose I/O port; alternate functions include D07/A07, AGTOA0, GTIOC8A, CTS8_RTS8/SS8 and KR07." }, { "number": "69", "name": "P106", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR06, D06, AGTOB0, GTIOC8B, SCK8, SSLA3_A, LCD_DATA00_A."+ "description": "General-purpose I/O port; alternate functions include D06/A06, AGTOB0, GTIOC8B, SCK8 and KR06." }, { "number": "70", "name": "P105", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ0/KR05, D05, GTETRGA, GTIOC1A, TXD8/MOSI8/SDA8, LCD_TCON3_A."+ "description": "General-purpose I/O port; alternate functions include IRQ0/KR05, D05/A05, GTETRGA, GTIOC1A and TXD8/MOSI8/SDA8." }, { "number": "71", "name": "P104", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ1/KR04, D04, GTETRGB, GTIOC1B, RXD8/MISO8/SCL8, LCD_TCON2_A."+ "description": "General-purpose I/O port; alternate functions include IRQ1/KR04, D04/A04, GTETRGB, GTIOC1B and RXD8/MISO8/SCL8." }, { "number": "72", "name": "P103", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR03, D03, GTOWUP, GTIOC2A_A, CTX0, CTS0_RTS0/SS0, LCD_TCON1_A."+ "description": "General-purpose I/O port; alternate functions include KR03, D03/A03, GTOWUP, GTIOC2A_A and CTX0." }, { "number": "73", "name": "P102", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR02, D02, AGTO0, GTOWLO, GTIOC2B_A, CRX0, SCK0, ADTRG0, LCD_TCON0_A."+ "description": "General-purpose I/O port; alternate functions include KR02, D02/A02, AGTO0, GTOWLO and CRX0." }, { "number": "74", "name": "P101", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates KR01, D01, AGTEE0, GTETRGB, GTIOC5A, TXD0/MOSI0/SDA0, CTS1_RTS1/SS1."+ "description": "General-purpose I/O port; alternate functions include IRQ1/KR01, D01/A01, AGTEE0, GTETRGB and GTIOC5A." }, { "number": "75", "name": "P100", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ2/KR00, D00, AGTIO0, GTETRGA, GTIOC5B, RXD0/MISO0/SCL0, LCD_EXTCLK_A."+ "description": "General-purpose I/O port; alternate functions include IRQ2/KR00, D00/A00, AGTIO0, GTETRGA and GTIOC5B." }, { "number": "76", "name": "P500", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates AGTOA0, GTIU, GTIOC11A, USB_VBUSEN, QSPCLK, SD1CLK_A, AN016, IVREF0."+ "description": "General-purpose I/O port; alternate functions include AGTOA0, GTIU, GTIOC11A, QSPCLK and analog input AN016." }, { "number": "77", "name": "P501", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ11, AGTOB0, GTIV, GTIOC11B, USB_OVRCURA, TXD5/MOSI5/SDA5, QSSL, AN116, IVREF1."+ "description": "General-purpose I/O port; alternate functions include IRQ11, AGTOB0, GTIV, GTIOC11B and analog input AN116." }, { "number": "78", "name": "P502", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates IRQ12, GTIW, GTIOC12A, USB_OVRCURB, RXD5/MISO5/SCL5, QIO0, AN017, IVCMP0."+ "description": "General-purpose I/O port; alternate functions include IRQ12, GTIW, GTIOC12A, QIO0 and analog input AN017." }, { "number": "79", "name": "P503", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates GTETRGC, GTIOC12B, USB_EXICEN, CTS6_RTS6/SS6, SCK5, QIO1, AN117."+ "description": "General-purpose I/O port; alternate functions include GTETRGC, GTIOC12B, CTS6_RTS6/SS6 and analog input AN117." }, { "number": "80", "name": "P504", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates ALE, GTETRGD, GTIOC13A, USB_ID, SCK6, CTS5_RTS5/SS5, QIO2, AN018."+ "description": "General-purpose I/O port; alternate functions include ALE, GTETRGD, GTIOC13A, SCK6 and analog input AN018." }, { "number": "81", "name": "P508", "type": "bidirectional",- "description": "General-purpose I/O port with pull-up (-10 to -300 µA) and selectable drive, high drive 16 mA average / 32 mA max per pin; alternates SCK6, SCK5 and ADC12 analog input AN020."+ "description": "General-purpose I/O port; alternate functions include SCK6, SCK5 and analog input AN020." }, { "number": "82", "name": "VCC", "type": "power_in",- "description": "Digital power supply, 2.7 to 3.6 V (3.0 to 3.6 V when USB or SDRAM is used); connect a 0.1 µF capacitor to VSS close to each VCC pin."+ "description": "Digital power supply, 2.7 to 3.6 V; connect a 0.1-uF smoothing capacitor to VSS close to each VCC pin." }, { "number": "83", "name": "VSS", "type": "power_in",- "description": "Ground pin; connect to the system power supply at 0 V."+ "description": "Ground pin; connect to the system power supply (0 V)." }, { "number": "84", "name": "P015", "type": "bidirectional",- "description": "I/O port with 4 mA average / 8 mA max output current per pin (Table 2.5); alternates IRQ13, AN006/AN106, DA1/IVCMP1."+ "description": "General-purpose I/O port (IRQ13); analog input AN006/AN106 and D/A output DA1 or comparator input IVCMP1 per the pin list." }, { "number": "85", "name": "P014", "type": "bidirectional",- "description": "I/O port with 4 mA average / 8 mA max output current per pin (Table 2.5); alternates IRQ... AN005/AN105 and DA0/IVREF3."+ "description": "General-purpose I/O port; analog input AN005/AN105 and D/A output DA0 or comparator reference IVREF3 per the pin list." }, { "number": "86",@@ -574,13 +574,13 @@ "number": "88", "name": "AVCC0", "type": "power_in",- "description": "Analog power supply for the ADC12 and PGA; supply at the same voltage as VCC (Table 2.2)."+ "description": "Analog power supply for the ADC12, comparator and PGA; supply at the same voltage as VCC (Note 2, p.30)." }, { "number": "89", "name": "AVSS0", "type": "power_in",- "description": "Analog ground for the ADC12 and PGA; supply at the same voltage as VSS (0 V)."+ "description": "Analog ground for the ADC12, comparator and PGA; supply at the same voltage as VSS." }, { "number": "90",@@ -592,61 +592,61 @@ "number": "91", "name": "VREFH0", "type": "power_in",- "description": "Analog reference voltage supply for the ADC12 unit 0; must satisfy 2.7 V ≤ VREFH0 ≤ AVCC0 and be connected to VCC when not used."+ "description": "Analog reference voltage supply for the ADC12 unit 0, with 2.7 V <= VREFH0 <= AVCC0; connect to VCC when not used." }, { "number": "92", "name": "P008", "type": "bidirectional",- "description": "I/O port with 2 mA average / 4 mA max output current per pin (Table 2.5); alternates IRQ12-DS and ADC12 analog input AN003."+ "description": "General-purpose I/O port; alternate functions include IRQ12-DS and analog input AN003." }, { "number": "93", "name": "P007", "type": "input",- "description": "Input-only port P007; alternates PGAVSS100/AN107 analog functions, with input leakage up to 45 µA before initialization (Table 2.6)."+ "description": "Input-only general-purpose port; the pin is also PGAVSS100/AN107 for the PGA differential input." }, { "number": "94", "name": "P006", "type": "input",- "description": "Input-only port P006; alternates IRQ11-DS, AN102 and IVCMP2, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ11-DS, analog input AN102 and comparator input IVCMP2." }, { "number": "95", "name": "P005", "type": "input",- "description": "Input-only port P005; alternates IRQ10-DS and AN101, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ10-DS, analog input AN101 and comparator input IVCMP2." }, { "number": "96", "name": "P004", "type": "input",- "description": "Input-only port P004; alternates IRQ9-DS and AN100, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ9-DS, analog input AN100 and comparator input IVCMP2." }, { "number": "97", "name": "P003", "type": "input",- "description": "Input-only port P003; alternates PGAVSS000/AN007 analog functions, with input leakage up to 45 µA before initialization (Table 2.6)."+ "description": "Input-only general-purpose port; the pin is also PGAVSS000/AN007 for the PGA differential input." }, { "number": "98", "name": "P002", "type": "input",- "description": "Input-only port P002; alternates IRQ8-DS and AN002, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ8-DS, analog input AN002 and comparator input IVCMP2." }, { "number": "99", "name": "P001", "type": "input",- "description": "Input-only port P001; alternates IRQ7-DS and AN001, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ7-DS, analog input AN001 and comparator input IVCMP2." }, { "number": "100", "name": "P000", "type": "input",- "description": "Input-only port P000; alternates IRQ6-DS and AN000, with input leakage limited to 1.0 µA (Table 2.6)."+ "description": "Input-only general-purpose port; alternate functions include IRQ6-DS, analog input AN000 and comparator input IVCMP2." } ], "provenance": {@@ -656,21 +656,23 @@ "extractor": "extract_pins 0.3", "primary_model": "claude-haiku-5-5", "primary_mode": "text",- "consensus_model": "claude-opus-5-5",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet names VCL0/VCL only as a 0.1 µF stabilization capacitor connection with no direction s; P213/XTAL is typed output and P212/EXTAL input per Table 1.17 (XTAL Output, EXTAL Input); the pin li; P201/MD and P200/NMI are multi-function pins; typed bidirectional and input respectively based on th"+ "extractor flagged: Pin numbering was taken from the LQFP100 column of the pin list (Section 1.7, pp.24-28), not from th; Shared debug, mode and oscillator pins were typed by their dedicated function, not by the port I/O c; Ports P202, P203, P204, P311-P315, P511-P513, P700-P713 (except the pins listed), PB00, PB01, P800-P",+ "8/100 pins cited to the wrong page (name found elsewhere): ['38:RES@p13', '39:P201/MD@p13', '86:VREFL@p17', '87:VREFH@p17']" ], "pages_sent": 115,- "cost_usd": 0.6541,- "at": "2026-11-16T18:53:45"+ "cost_usd": 0.7693,+ "at": "2026-11-20T11:38:23" }, "datasheet": { "url": "https://www.renesas.com/us/en/document/dst/ra6m3-group-datasheet", "pages": 115, "sha256": "61df63b02547f21b",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "RENESAS datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -701,7 +703,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",- "checked": "2026-11-16",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -719,8 +721,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "bfae78ddf3f13723798b6f10b232d2f24cee13333b3476f7dd9b9ca1e964bdf4",- "checked": "2026-11-16",+ "sha256": "5d3beb15d456d401f7e2711c018519bb7f8ee4d93d2a4ee95218cdf7df30eb53",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -774,26 +776,9 @@ } }, "metadata": {- "specs": {- "Manufacturer": "RENESAS",- "Package": "QFP-100(14x14)",- "Category": "Embedded Processors & Controllers",- "Pins": "100"- },- "appearance": {- "contacts": {- "quote": "Terminal material (Pb-free) A: Sn (Tin) only",- "page": 10,- "doc": "ds.pdf",- "plating": "tin"- },- "version": 1,- "datasheet_sha256": "61df63b02547f21b49eb51832fbdb0ca773319c72c66270e2938cc9f0d7fe8ea"- }, "characteristics": { "version": 1, "source": "datasheet",- "datasheet_sha256": "61df63b02547f21b49eb51832fbdb0ca773319c72c66270e2938cc9f0d7fe8ea", "rows": [ { "name": "Power supply voltage",@@ -1544,5 +1529,7 @@ ], "visibility": { "public": true- }+ },+ "description": "RENESAS Pre-ordered MCUs, QFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
r7fa6m3ah3cfp-aa0-hero.glb⋯ 1 unchanged line ⋯
r7fa6m3ah3cfp-aa0-hero.overlay.json+2282−2287@@ -1,2289 +1,2284 @@ {- "spec": "adom-hero 1.4",- "mpn": "R7FA6M3AH3CFP#AA0",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 100,- "span_mm": 16.95,- "dash_mm": 0.4238,- "gap_mm": 0.2542,- "pad_stroke_mm": 0.09- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 9,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 100,- "sides": "top + mirrored underside (single-sided)",- "omitted": null,- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "board_underside": true,- "electrical_pads_without_contact": [],- "mounting_pads_left_out": [],- "centre_offset_mm": 0.0,- "over_pads": true,- "tolerance_mm": 1.356,- "orientation_flipped": false,- "contacts_bbox_mm": [- -8.0,- 8.0,- -8.0,- 8.0+ "spec": "adom-hero 1.4",+ "mpn": "R7FA6M3AH3CFP#AA0",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 100,+ "span_mm": 16.95,+ "dash_mm": 0.4238,+ "gap_mm": 0.2542,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 100,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 1.356,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -8.0,+ 8.0,+ -8.0,+ 8.0+ ],+ "pads_bbox_mm": [+ -8.475,+ 8.475,+ -8.475,+ 8.475+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "r7fa6m3ah3cfp-aa0-etched.glb",+ "glb_sha256": "05fe856f5eb343eb3a44d412a5278fd9826f0b9d6e962048b54690c27b63fe35",+ "footprint": "r7fa6m3ah3cfp-aa0.kicad_mod",+ "footprint_sha256": "983eaf67626d2fe2566a4758bbf3f3ae02731fd07e16a9ae43ec0737af60043c",+ "pins": "page.json component.pins",+ "pins_sha256": "5d49ad5f41e9666dd268d2ebe63cf2138216d38c3e39e511de6723985848cfd4"+ },+ "generator": "adom-wiki 1.8.30 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "P400",+ "x": -8.575,+ "y": -6.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "P401",+ "x": -8.575,+ "y": -5.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "P402",+ "x": -8.575,+ "y": -5.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "P403",+ "x": -8.575,+ "y": -4.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "P404",+ "x": -8.575,+ "y": -4.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "P405",+ "x": -8.575,+ "y": -3.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "P406",+ "x": -8.575,+ "y": -3.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "VBATT",+ "x": -8.575,+ "y": -2.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "VCL0",+ "x": -8.575,+ "y": -2.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "XCIN",+ "x": -8.575,+ "y": -1.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "XCOUT",+ "x": -8.575,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "VSS",+ "x": -8.575,+ "y": -0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "P213/XTAL",+ "x": -8.575,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "P212/EXTAL",+ "x": -8.575,+ "y": 0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "15",+ "text": "VCC",+ "x": -8.575,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "16",+ "text": "P708",+ "x": -8.575,+ "y": 1.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "17",+ "text": "P415",+ "x": -8.575,+ "y": 2.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "18",+ "text": "P414",+ "x": -8.575,+ "y": 2.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "19",+ "text": "P413",+ "x": -8.575,+ "y": 3.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "20",+ "text": "P412",+ "x": -8.575,+ "y": 3.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "21",+ "text": "P411",+ "x": -8.575,+ "y": 4.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "22",+ "text": "P410",+ "x": -8.575,+ "y": 4.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "23",+ "text": "P409",+ "x": -8.575,+ "y": 5.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "24",+ "text": "P408",+ "x": -8.575,+ "y": 5.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "25",+ "text": "P407",+ "x": -8.575,+ "y": 6.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "26",+ "text": "VSS_USB",+ "x": -6.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "27",+ "text": "USB_DM",+ "x": -5.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "28",+ "text": "USB_DP",+ "x": -5.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "29",+ "text": "VCC_USB",+ "x": -4.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "30",+ "text": "P207",+ "x": -4.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "31",+ "text": "P206",+ "x": -3.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "32",+ "text": "P205",+ "x": -3.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "33",+ "text": "P214",+ "x": -2.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "34",+ "text": "P211",+ "x": -2.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "35",+ "text": "P210",+ "x": -1.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "36",+ "text": "P209",+ "x": -1.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "37",+ "text": "P208",+ "x": -0.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "38",+ "text": "RES",+ "x": 0.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "39",+ "text": "P201/MD",+ "x": 0.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "40",+ "text": "P200",+ "x": 1.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "41",+ "text": "P307",+ "x": 1.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "42",+ "text": "P306",+ "x": 2.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "43",+ "text": "P305",+ "x": 2.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "44",+ "text": "P304",+ "x": 3.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "45",+ "text": "VSS",+ "x": 3.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "46",+ "text": "VCC",+ "x": 4.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "47",+ "text": "P303",+ "x": 4.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "48",+ "text": "P302",+ "x": 5.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "49",+ "text": "P301",+ "x": 5.5,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "50",+ "text": "P300/TCK/SWCLK",+ "x": 6.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "51",+ "text": "P108/TMS/SWDIO",+ "x": 8.575,+ "y": 6.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "52",+ "text": "P109/TDO/SWO",+ "x": 8.575,+ "y": 5.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "53",+ "text": "P110/TDI",+ "x": 8.575,+ "y": 5.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "54",+ "text": "P111",+ "x": 8.575,+ "y": 4.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "55",+ "text": "P112",+ "x": 8.575,+ "y": 4.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "56",+ "text": "P113",+ "x": 8.575,+ "y": 3.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "57",+ "text": "P114",+ "x": 8.575,+ "y": 3.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "58",+ "text": "P115",+ "x": 8.575,+ "y": 2.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "59",+ "text": "P608",+ "x": 8.575,+ "y": 2.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "60",+ "text": "P609",+ "x": 8.575,+ "y": 1.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "61",+ "text": "P610",+ "x": 8.575,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "62",+ "text": "VCC",+ "x": 8.575,+ "y": 0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "63",+ "text": "VSS",+ "x": 8.575,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "64",+ "text": "VCL",+ "x": 8.575,+ "y": -0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "65",+ "text": "P602",+ "x": 8.575,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "66",+ "text": "P601",+ "x": 8.575,+ "y": -1.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "67",+ "text": "P600",+ "x": 8.575,+ "y": -2.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "68",+ "text": "P107",+ "x": 8.575,+ "y": -2.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "69",+ "text": "P106",+ "x": 8.575,+ "y": -3.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "70",+ "text": "P105",+ "x": 8.575,+ "y": -3.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "71",+ "text": "P104",+ "x": 8.575,+ "y": -4.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "72",+ "text": "P103",+ "x": 8.575,+ "y": -4.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "73",+ "text": "P102",+ "x": 8.575,+ "y": -5.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "74",+ "text": "P101",+ "x": 8.575,+ "y": -5.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "75",+ "text": "P100",+ "x": 8.575,+ "y": -6.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "76",+ "text": "P500",+ "x": 6.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "77",+ "text": "P501",+ "x": 5.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "78",+ "text": "P502",+ "x": 5.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "79",+ "text": "P503",+ "x": 4.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "80",+ "text": "P504",+ "x": 4.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "81",+ "text": "P508",+ "x": 3.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "82",+ "text": "VCC",+ "x": 3.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "83",+ "text": "VSS",+ "x": 2.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "84",+ "text": "P015",+ "x": 2.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "85",+ "text": "P014",+ "x": 1.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "86",+ "text": "VREFL",+ "x": 1.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "87",+ "text": "VREFH",+ "x": 0.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "88",+ "text": "AVCC0",+ "x": 0.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "89",+ "text": "AVSS0",+ "x": -0.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "90",+ "text": "VREFL0",+ "x": -1.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "91",+ "text": "VREFH0",+ "x": -1.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "92",+ "text": "P008",+ "x": -2.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "93",+ "text": "P007",+ "x": -2.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "94",+ "text": "P006",+ "x": -3.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "95",+ "text": "P005",+ "x": -3.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "96",+ "text": "P004",+ "x": -4.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "97",+ "text": "P003",+ "x": -4.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "98",+ "text": "P002",+ "x": -5.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "99",+ "text": "P001",+ "x": -5.5,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "100",+ "text": "P000",+ "x": -6.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.25+ } ],- "pads_bbox_mm": [- -8.475,- 8.475,- -8.475,- 8.475- ],- "seating_z_mm": -0.0- },- "sources": {- "glb": "r7fa6m3ah3cfp-aa0-etched.glb",- "glb_sha256": "05fe856f5eb343eb3a44d412a5278fd9826f0b9d6e962048b54690c27b63fe35",- "footprint": "r7fa6m3ah3cfp-aa0.kicad_mod",- "footprint_sha256": "983eaf67626d2fe2566a4758bbf3f3ae02731fd07e16a9ae43ec0737af60043c",- "pins": "page.json component.pins",- "pins_sha256": "38497b67501c8ae4ac3f6c383983bf9c9aeb77b5d5d35891125542e739797a71"- },- "generator": "factory/hero_glb.py",- "labels": [- {- "pad": "1",- "text": "P400",- "x": -8.575,- "y": -6.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "2",- "text": "P401",- "x": -8.575,- "y": -5.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "3",- "text": "P402",- "x": -8.575,- "y": -5.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "4",- "text": "P403",- "x": -8.575,- "y": -4.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "5",- "text": "P404",- "x": -8.575,- "y": -4.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "6",- "text": "P405",- "x": -8.575,- "y": -3.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "7",- "text": "P406",- "x": -8.575,- "y": -3.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "8",- "text": "VBATT",- "x": -8.575,- "y": -2.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "9",- "text": "VCL0",- "x": -8.575,- "y": -2.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "10",- "text": "XCIN",- "x": -8.575,- "y": -1.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "11",- "text": "XCOUT",- "x": -8.575,- "y": -1.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "12",- "text": "VSS",- "x": -8.575,- "y": -0.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "13",- "text": "P213/XTAL",- "x": -8.575,- "y": 0.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "14",- "text": "P212/EXTAL",- "x": -8.575,- "y": 0.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "15",- "text": "VCC",- "x": -8.575,- "y": 1.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "16",- "text": "P708",- "x": -8.575,- "y": 1.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "17",- "text": "P415",- "x": -8.575,- "y": 2.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "18",- "text": "P414",- "x": -8.575,- "y": 2.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "19",- "text": "P413",- "x": -8.575,- "y": 3.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "20",- "text": "P412",- "x": -8.575,- "y": 3.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "21",- "text": "P411",- "x": -8.575,- "y": 4.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "22",- "text": "P410",- "x": -8.575,- "y": 4.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "23",- "text": "P409",- "x": -8.575,- "y": 5.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "24",- "text": "P408",- "x": -8.575,- "y": 5.5,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "25",- "text": "P407",- "x": -8.575,- "y": 6.0,- "align": "right",- "vertical": false,- "h": 0.25- },- {- "pad": "26",- "text": "VSS_USB",- "x": -6.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "27",- "text": "USB_DM",- "x": -5.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "28",- "text": "USB_DP",- "x": -5.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "29",- "text": "VCC_USB",- "x": -4.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "30",- "text": "P207",- "x": -4.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "31",- "text": "P206",- "x": -3.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "32",- "text": "P205",- "x": -3.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "33",- "text": "P214",- "x": -2.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "34",- "text": "P211",- "x": -2.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "35",- "text": "P210",- "x": -1.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "36",- "text": "P209",- "x": -1.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "37",- "text": "P208",- "x": -0.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "38",- "text": "RES",- "x": 0.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "39",- "text": "P201/MD",- "x": 0.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "40",- "text": "P200",- "x": 1.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "41",- "text": "P307",- "x": 1.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "42",- "text": "P306",- "x": 2.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "43",- "text": "P305",- "x": 2.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "44",- "text": "P304",- "x": 3.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "45",- "text": "VSS",- "x": 3.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "46",- "text": "VCC",- "x": 4.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "47",- "text": "P303",- "x": 4.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "48",- "text": "P302",- "x": 5.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "49",- "text": "P301",- "x": 5.5,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "50",- "text": "P300/TCK/SWCLK",- "x": 6.0,- "y": 8.575,- "align": "right",- "vertical": true,- "h": 0.25- },- {- "pad": "51",- "text": "P108/TMS/SWDIO",- "x": 8.575,- "y": 6.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "52",- "text": "P109/TDO",- "x": 8.575,- "y": 5.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "53",- "text": "P110/TDI",- "x": 8.575,- "y": 5.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "54",- "text": "P111",- "x": 8.575,- "y": 4.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "55",- "text": "P112",- "x": 8.575,- "y": 4.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "56",- "text": "P113",- "x": 8.575,- "y": 3.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "57",- "text": "P114",- "x": 8.575,- "y": 3.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "58",- "text": "P115",- "x": 8.575,- "y": 2.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "59",- "text": "P608",- "x": 8.575,- "y": 2.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "60",- "text": "P609",- "x": 8.575,- "y": 1.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "61",- "text": "P610",- "x": 8.575,- "y": 1.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "62",- "text": "VCC",- "x": 8.575,- "y": 0.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "63",- "text": "VSS",- "x": 8.575,- "y": 0.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "64",- "text": "VCL",- "x": 8.575,- "y": -0.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "65",- "text": "P602",- "x": 8.575,- "y": -1.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "66",- "text": "P601",- "x": 8.575,- "y": -1.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "67",- "text": "P600",- "x": 8.575,- "y": -2.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "68",- "text": "P107",- "x": 8.575,- "y": -2.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "69",- "text": "P106",- "x": 8.575,- "y": -3.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "70",- "text": "P105",- "x": 8.575,- "y": -3.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "71",- "text": "P104",- "x": 8.575,- "y": -4.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "72",- "text": "P103",- "x": 8.575,- "y": -4.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "73",- "text": "P102",- "x": 8.575,- "y": -5.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "74",- "text": "P101",- "x": 8.575,- "y": -5.5,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "75",- "text": "P100",- "x": 8.575,- "y": -6.0,- "align": "left",- "vertical": false,- "h": 0.25- },- {- "pad": "76",- "text": "P500",- "x": 6.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "77",- "text": "P501",- "x": 5.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "78",- "text": "P502",- "x": 5.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "79",- "text": "P503",- "x": 4.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "80",- "text": "P504",- "x": 4.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "81",- "text": "P508",- "x": 3.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "82",- "text": "VCC",- "x": 3.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "83",- "text": "VSS",- "x": 2.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "84",- "text": "P015",- "x": 2.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "85",- "text": "P014",- "x": 1.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "86",- "text": "VREFL",- "x": 1.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "87",- "text": "VREFH",- "x": 0.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "88",- "text": "AVCC0",- "x": 0.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "89",- "text": "AVSS0",- "x": -0.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "90",- "text": "VREFL0",- "x": -1.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "91",- "text": "VREFH0",- "x": -1.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "92",- "text": "P008",- "x": -2.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "93",- "text": "P007",- "x": -2.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "94",- "text": "P006",- "x": -3.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "95",- "text": "P005",- "x": -3.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "96",- "text": "P004",- "x": -4.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "97",- "text": "P003",- "x": -4.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "98",- "text": "P002",- "x": -5.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "99",- "text": "P001",- "x": -5.5,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- },- {- "pad": "100",- "text": "P000",- "x": -6.0,- "y": -8.575,- "align": "left",- "vertical": true,- "h": 0.25- }- ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -7.675,- -6.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -7.675,- -5.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -7.675,- -5.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -7.675,- -4.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -7.675,- -4.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -7.675,- -3.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -7.675,- -3.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -7.675,- -2.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -7.675,- -2.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -7.675,- -1.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- -7.675,- -1.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- -7.675,- -0.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- -7.675,- 0.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- -7.675,- 0.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- -7.675,- 1.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- -7.675,- 1.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- -7.675,- 2.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- -7.675,- 2.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- -7.675,- 3.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- -7.675,- 3.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "21",- "shape": "roundrect",- "center_mm": [- -7.675,- 4.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "22",- "shape": "roundrect",- "center_mm": [- -7.675,- 4.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "23",- "shape": "roundrect",- "center_mm": [- -7.675,- 5.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "24",- "shape": "roundrect",- "center_mm": [- -7.675,- 5.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "25",- "shape": "roundrect",- "center_mm": [- -7.675,- 6.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "26",- "shape": "roundrect",- "center_mm": [- -6.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "27",- "shape": "roundrect",- "center_mm": [- -5.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "28",- "shape": "roundrect",- "center_mm": [- -5.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "29",- "shape": "roundrect",- "center_mm": [- -4.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "30",- "shape": "roundrect",- "center_mm": [- -4.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "31",- "shape": "roundrect",- "center_mm": [- -3.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "32",- "shape": "roundrect",- "center_mm": [- -3.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "33",- "shape": "roundrect",- "center_mm": [- -2.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "34",- "shape": "roundrect",- "center_mm": [- -2.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "35",- "shape": "roundrect",- "center_mm": [- -1.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "36",- "shape": "roundrect",- "center_mm": [- -1.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "37",- "shape": "roundrect",- "center_mm": [- -0.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "38",- "shape": "roundrect",- "center_mm": [- 0.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "39",- "shape": "roundrect",- "center_mm": [- 0.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "40",- "shape": "roundrect",- "center_mm": [- 1.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "41",- "shape": "roundrect",- "center_mm": [- 1.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "42",- "shape": "roundrect",- "center_mm": [- 2.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "43",- "shape": "roundrect",- "center_mm": [- 2.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "44",- "shape": "roundrect",- "center_mm": [- 3.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "45",- "shape": "roundrect",- "center_mm": [- 3.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "46",- "shape": "roundrect",- "center_mm": [- 4.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "47",- "shape": "roundrect",- "center_mm": [- 4.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "48",- "shape": "roundrect",- "center_mm": [- 5.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "49",- "shape": "roundrect",- "center_mm": [- 5.5,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "50",- "shape": "roundrect",- "center_mm": [- 6.0,- 7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "51",- "shape": "roundrect",- "center_mm": [- 7.675,- 6.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "52",- "shape": "roundrect",- "center_mm": [- 7.675,- 5.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "53",- "shape": "roundrect",- "center_mm": [- 7.675,- 5.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "54",- "shape": "roundrect",- "center_mm": [- 7.675,- 4.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "55",- "shape": "roundrect",- "center_mm": [- 7.675,- 4.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "56",- "shape": "roundrect",- "center_mm": [- 7.675,- 3.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "57",- "shape": "roundrect",- "center_mm": [- 7.675,- 3.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "58",- "shape": "roundrect",- "center_mm": [- 7.675,- 2.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "59",- "shape": "roundrect",- "center_mm": [- 7.675,- 2.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "60",- "shape": "roundrect",- "center_mm": [- 7.675,- 1.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "61",- "shape": "roundrect",- "center_mm": [- 7.675,- 1.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "62",- "shape": "roundrect",- "center_mm": [- 7.675,- 0.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "63",- "shape": "roundrect",- "center_mm": [- 7.675,- 0.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "64",- "shape": "roundrect",- "center_mm": [- 7.675,- -0.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "65",- "shape": "roundrect",- "center_mm": [- 7.675,- -1.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "66",- "shape": "roundrect",- "center_mm": [- 7.675,- -1.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "67",- "shape": "roundrect",- "center_mm": [- 7.675,- -2.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "68",- "shape": "roundrect",- "center_mm": [- 7.675,- -2.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "69",- "shape": "roundrect",- "center_mm": [- 7.675,- -3.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "70",- "shape": "roundrect",- "center_mm": [- 7.675,- -3.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "71",- "shape": "roundrect",- "center_mm": [- 7.675,- -4.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "72",- "shape": "roundrect",- "center_mm": [- 7.675,- -4.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "73",- "shape": "roundrect",- "center_mm": [- 7.675,- -5.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "74",- "shape": "roundrect",- "center_mm": [- 7.675,- -5.5- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "75",- "shape": "roundrect",- "center_mm": [- 7.675,- -6.0- ],- "size_mm": [- 1.6,- 0.3- ],- "rot": 0.0- },- {- "number": "76",- "shape": "roundrect",- "center_mm": [- 6.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "77",- "shape": "roundrect",- "center_mm": [- 5.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "78",- "shape": "roundrect",- "center_mm": [- 5.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "79",- "shape": "roundrect",- "center_mm": [- 4.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "80",- "shape": "roundrect",- "center_mm": [- 4.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "81",- "shape": "roundrect",- "center_mm": [- 3.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "82",- "shape": "roundrect",- "center_mm": [- 3.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "83",- "shape": "roundrect",- "center_mm": [- 2.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "84",- "shape": "roundrect",- "center_mm": [- 2.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "85",- "shape": "roundrect",- "center_mm": [- 1.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "86",- "shape": "roundrect",- "center_mm": [- 1.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "87",- "shape": "roundrect",- "center_mm": [- 0.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "88",- "shape": "roundrect",- "center_mm": [- 0.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "89",- "shape": "roundrect",- "center_mm": [- -0.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "90",- "shape": "roundrect",- "center_mm": [- -1.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "91",- "shape": "roundrect",- "center_mm": [- -1.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "92",- "shape": "roundrect",- "center_mm": [- -2.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "93",- "shape": "roundrect",- "center_mm": [- -2.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "94",- "shape": "roundrect",- "center_mm": [- -3.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "95",- "shape": "roundrect",- "center_mm": [- -3.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "96",- "shape": "roundrect",- "center_mm": [- -4.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "97",- "shape": "roundrect",- "center_mm": [- -4.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "98",- "shape": "roundrect",- "center_mm": [- -5.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "99",- "shape": "roundrect",- "center_mm": [- -5.5,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- },- {- "number": "100",- "shape": "roundrect",- "center_mm": [- -6.0,- -7.675- ],- "size_mm": [- 0.3,- 1.6- ],- "rot": 0.0- }- ]-}+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -6.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -5.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -5.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -4.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -4.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -3.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -3.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -2.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -2.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -1.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -1.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -0.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 0.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 1.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 1.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 2.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 2.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 3.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 3.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 4.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 4.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 5.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 5.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 6.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ -6.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ -5.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ -5.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "roundrect",+ "center_mm": [+ -4.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "30",+ "shape": "roundrect",+ "center_mm": [+ -4.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "31",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "32",+ "shape": "roundrect",+ "center_mm": [+ -3.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "33",+ "shape": "roundrect",+ "center_mm": [+ -2.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "34",+ "shape": "roundrect",+ "center_mm": [+ -2.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "35",+ "shape": "roundrect",+ "center_mm": [+ -1.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "36",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "37",+ "shape": "roundrect",+ "center_mm": [+ -0.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "38",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "39",+ "shape": "roundrect",+ "center_mm": [+ 0.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "40",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "41",+ "shape": "roundrect",+ "center_mm": [+ 1.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "42",+ "shape": "roundrect",+ "center_mm": [+ 2.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "43",+ "shape": "roundrect",+ "center_mm": [+ 2.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "44",+ "shape": "roundrect",+ "center_mm": [+ 3.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "45",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "46",+ "shape": "roundrect",+ "center_mm": [+ 4.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "47",+ "shape": "roundrect",+ "center_mm": [+ 4.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "48",+ "shape": "roundrect",+ "center_mm": [+ 5.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "49",+ "shape": "roundrect",+ "center_mm": [+ 5.5,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "50",+ "shape": "roundrect",+ "center_mm": [+ 6.0,+ 7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "51",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 6.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "52",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 5.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "53",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 5.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "54",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 4.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "55",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 4.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "56",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 3.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "57",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 3.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "58",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 2.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "59",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 2.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "60",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 1.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "61",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 1.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "62",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 0.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "63",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "64",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -0.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "65",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -1.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "66",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -1.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "67",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -2.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "68",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -2.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "69",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -3.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "70",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -3.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "71",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -4.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "72",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -4.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "73",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -5.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "74",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -5.5+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "75",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -6.0+ ],+ "size_mm": [+ 1.6,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "76",+ "shape": "roundrect",+ "center_mm": [+ 6.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "77",+ "shape": "roundrect",+ "center_mm": [+ 5.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "78",+ "shape": "roundrect",+ "center_mm": [+ 5.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "79",+ "shape": "roundrect",+ "center_mm": [+ 4.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "80",+ "shape": "roundrect",+ "center_mm": [+ 4.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "81",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "82",+ "shape": "roundrect",+ "center_mm": [+ 3.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "83",+ "shape": "roundrect",+ "center_mm": [+ 2.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "84",+ "shape": "roundrect",+ "center_mm": [+ 2.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "85",+ "shape": "roundrect",+ "center_mm": [+ 1.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "86",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "87",+ "shape": "roundrect",+ "center_mm": [+ 0.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "88",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "89",+ "shape": "roundrect",+ "center_mm": [+ -0.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "90",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "91",+ "shape": "roundrect",+ "center_mm": [+ -1.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "92",+ "shape": "roundrect",+ "center_mm": [+ -2.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "93",+ "shape": "roundrect",+ "center_mm": [+ -2.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "94",+ "shape": "roundrect",+ "center_mm": [+ -3.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "95",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "96",+ "shape": "roundrect",+ "center_mm": [+ -4.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "97",+ "shape": "roundrect",+ "center_mm": [+ -4.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "98",+ "shape": "roundrect",+ "center_mm": [+ -5.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "99",+ "shape": "roundrect",+ "center_mm": [+ -5.5,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "100",+ "shape": "roundrect",+ "center_mm": [+ -6.0,+ -7.675+ ],+ "size_mm": [+ 0.3,+ 1.6+ ],+ "rot": 0.0+ }+ ]+}
r7fa6m3ah3cfp-aa0.kicad_sym+2−2@@ -160,7 +160,7 @@ (name "RES" (effects (font (size 1.27 1.27)))) (number "38" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -25.40 -35.56 0) (length 5.08)+ (pin input line (at -25.40 -35.56 0) (length 5.08) (name "P201/MD" (effects (font (size 1.27 1.27)))) (number "39" (effects (font (size 1.27 1.27)))) )@@ -401,7 +401,7 @@ (number "53" (effects (font (size 1.27 1.27)))) ) (pin output line (at 25.40 -60.96 180) (length 5.08)- (name "P109/TDO" (effects (font (size 1.27 1.27))))+ (name "P109/TDO/SWO" (effects (font (size 1.27 1.27)))) (number "52" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at 25.40 -63.50 180) (length 5.08)
r7fa6m3ah3cfp-aa0.lbr+3−3@@ -225,7 +225,7 @@ <pin name="P209" x="-25.4" y="-27.94" length="middle" direction="io"/> <pin name="P208" x="-25.4" y="-30.48" length="middle" direction="io"/> <pin name="RES" x="-25.4" y="-33.02" length="middle" direction="in"/>- <pin name="P201/MD" x="-25.4" y="-35.56" length="middle" direction="io"/>+ <pin name="P201/MD" x="-25.4" y="-35.56" length="middle" direction="in"/> <pin name="P200" x="-25.4" y="-38.1" length="middle" direction="in"/> <pin name="P307" x="-25.4" y="-40.64" length="middle" direction="io"/> <pin name="P306" x="-25.4" y="-43.18" length="middle" direction="io"/>@@ -285,7 +285,7 @@ <pin name="P112" x="25.4" y="-53.34" length="middle" direction="io" rot="R180"/> <pin name="P111" x="25.4" y="-55.88" length="middle" direction="io" rot="R180"/> <pin name="P110/TDI" x="25.4" y="-58.42" length="middle" direction="in" rot="R180"/>- <pin name="P109/TDO" x="25.4" y="-60.96" length="middle" direction="out" rot="R180"/>+ <pin name="P109/TDO/SWO" x="25.4" y="-60.96" length="middle" direction="out" rot="R180"/> <pin name="P108/TMS/SWDIO" x="25.4" y="-63.5" length="middle" direction="io" rot="R180"/> </symbol> </symbols>@@ -396,7 +396,7 @@ <connect gate="G$1" pin="P112" pad="55"/> <connect gate="G$1" pin="P111" pad="54"/> <connect gate="G$1" pin="P110/TDI" pad="53"/>- <connect gate="G$1" pin="P109/TDO" pad="52"/>+ <connect gate="G$1" pin="P109/TDO/SWO" pad="52"/> <connect gate="G$1" pin="P108/TMS/SWDIO" pad="51"/> </connects> <technologies>