main
Ray Publish 0.1.0 fb5651b

R5F5651CDDFP#10

RENESAS · Pre-ordered MCUs · LQFP-100(14x14)

R5F5651CDDFP#10 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVCC1 power_in Analog supply and reference voltage for the 12-bit A/D converter unit 1, D/A converter and temperature sensor; connect to a branch of VCC and to AVSS1 via a 0.1-μF ceramic capacitor.
2 EMLE input On-chip emulator enable input; drive high when the on-chip emulator is used and low when not used.
3 AVSS1 power_in Analog ground for the 12-bit A/D converter unit 1, D/A converter and temperature sensor; connect to a branch of VSS.
4 PJ3 bidirectional General I/O port PJ3 with alternate functions EDACK1, MTIOC3C, ET0_EXOUT, CTS6#/RTS6#/SS6#, CTS0#/RTS0#/SS0#.
5 VCL passive Internal power supply stabilization pin; connect to VSS via a 0.22-μF multilayer ceramic capacitor placed close to the pin.
6 VBATT power_in Backup power supply pin.
7 MD/FINED bidirectional Operating mode setting input (level must not change during operation) shared with the FINE debug interface I/O.
8 XCIN input Sub-clock oscillator input; connect a crystal resonator between XCOUT and XCIN.
9 XCOUT output Sub-clock oscillator output; connect a crystal resonator between XCOUT and XCIN.
10 RES# input Reset signal input; the device enters the reset state when this pin goes low.
11 P37/XTAL bidirectional Port P37 shared with the main clock crystal resonator pin XTAL (8 to 24 MHz).
12 VSS power_in Ground pin; connect to the system ground (0 V).
13 P36/EXTAL bidirectional Port P36 shared with the EXTAL pin for crystal resonator or external clock input (up to 24 MHz).
14 VCC power_in Power supply pin (2.7 to 3.6 V); connect to VSS via a 0.1-μF multilayer ceramic capacitor placed close to the pin.
15 P35 input Input-only port P35 with non-maskable interrupt NMI and USB boot power selection UPSEL (low = self-powered, high = bus-powered).
16 P34 bidirectional Port P34 with MTIOC0A, TMCI3, PO12, POE10#, ET0_LINKSTA, SCK6/SCK0, IRQ4; also on-chip emulator TRST# input.
17 P33 bidirectional Port P33 with EDREQ1, MTIOC0D, TIOCD0, TMRI3, POE4#/POE11#, RXD6/RXD0, CRX0, IRQ3-DS.
18 P32 bidirectional Port P32 with MTIOC0C, TIOCC0, TMO3, RTCIC2, RTCOUT, POE0#/POE10#, TXD6/TXD0, CTX0, USB0_VBUSEN, IRQ2-DS.
19 P31 bidirectional Port P31 with MTIOC4D, TMCI2, PO9, RTCIC1, CTS1#/RTS1#/SS1#, SSLB0-A, IRQ1-DS; also on-chip emulator TMS input.
20 P30 bidirectional Port P30 with MTIOC4B, TMRI3, PO8, RTCIC0, POE8#, RXD1, MISOB-A, IRQ0-DS; also on-chip emulator TDI input.
21 P27 bidirectional Port P27 with CS7#, MTIOC2B, TMCI3, PO7, SCK1, RSPCKB-A; also on-chip emulator TCK input.
22 P26 bidirectional Port P26 with CS6#, MTIOC2A, TMO1, PO6, TXD1, CTS3#/RTS3#/SS3#, MOSIB-A; also on-chip emulator TDO output.
23 P25 bidirectional Port P25 with CS5#, EDACK1, MTIOC4C, MTCLKB, TIOCA4, PO5, RXD3, ADTRG0#.
24 P24 bidirectional Port P24 with CS4#, EDREQ1, MTIOC4A, MTCLKA, TIOCB4, TMRI1, PO4, SCK3, USB0_VBUSEN.
25 P23 bidirectional Port P23 with EDACK0, MTIOC3D, MTCLKD, TIOCD3, PO3, TXD3, CTS0#/RTS0#/SS0#.
26 P22 bidirectional Port P22 with EDREQ0, MTIOC3B, MTCLKC, TIOCC3, TMO0, PO2, SCK0, USB0_OVRCURB.
27 P21 bidirectional Port P21 with MTIOC1B, MTIOC4A, TIOCA3, TMCI0, PO1, RXD0, SCL1, USB0_EXICEN, IRQ9.
28 P20 bidirectional Port P20 with MTIOC1A, TIOCB3, TMRI0, PO0, TXD0, SDA1, USB0_ID, IRQ8.
29 P17 bidirectional Port P17 with MTIOC3A/3B/4B, TIOCB0, TCLKD, TMO1, PO15, POE8#, SCK1, TXD3, SDA2-DS, IRQ7, ADTRG1#.
30 P16 bidirectional Port P16 with MTIOC3C/3D, TIOCB1, TCLKC, TMO2, PO14, RTCOUT, TXD1, RXD3, SCL2-DS, USB0_VBUSEN, USB0_VBUS, USB0_OVRCURB, IRQ6, ADTRG0#.
31 P15 bidirectional Port P15 with MTIOC0B, MTCLKB, TIOCB2, TCLKB, TMCI2, PO13, RXD1, SCK3, CRX1-DS, IRQ5.
32 P14 bidirectional Port P14 with MTIOC3A, MTCLKA, TIOCB5, TCLKA, TMRI2, PO15, CTS1#/RTS1#/SS1#, CTX1, USB0_OVRCURA, IRQ4.
33 P13 bidirectional Port P13 with MTIOC0B, TIOCA5, TMO3, PO13, TXD2, SDA0[FM+], IRQ3, ADTRG1#.
34 P12 bidirectional Port P12 with TMCI1, RXD2, SCL0[FM+], IRQ2.
35 VCC_USB power_in USB power supply pin.
36 USB0_DM bidirectional USB transceiver D- data input/output.
37 USB0_DP bidirectional USB transceiver D+ data input/output.
38 VSS_USB power_in USB ground pin.
39 P55 bidirectional Port P55 with D0[A0/D0], WAIT#, EDREQ0, MTIOC4D, TMO3, ET0_EXOUT, CRX1, IRQ10.
40 P54 bidirectional Port P54 with ALE, D1[A1/D1], EDACK0, MTIOC4B, TMCI1, ET0_LINKSTA, CTS2#/RTS2#/SS2#, CTX1.
41 P53 bidirectional Port P53 multiplexed with BCLK external bus clock output; cannot be used as I/O port when the external bus is enabled.
42 P52 bidirectional Port P52 with RD#, RXD2/SMISO2/SSCL2, SSLB3-A.
43 P51 bidirectional Port P51 with WR1#/BC1#, WAIT#, SCK2, SSLB2-A.
44 P50 bidirectional Port P50 with WR0#/WR#, TXD2/SMOSI2/SSDA2, SSLB1-A.
45 PC7 bidirectional Port PC7 with A23/CS0#, MTIOC3A, TMO2, TOC0, CACREF, ET0_COL, TXD8/TXD10, MISOA-A, IRQ14; also USB boot mode enable input UB.
46 PC6 bidirectional Port PC6 with D2[A2/D2], A22/CS1#, MTIOC3C, MTCLKA, TMCI2, PO30, TIC0, ET0_ETXD3, RXD8/RXD10, MOSIA-A, IRQ13.
47 PC5 bidirectional Port PC5 with D3[A3/D3], A21/CS2#/WAIT#, MTIOC3B, MTCLKD, TMRI2, PO29, ET0_ETXD2, SCK8/SCK10, RSPCKA-A.
48 PC4 bidirectional Port PC4 with A20/CS3#, MTIOC3D, MTCLKC, TMCI1, PO25, POE0#, ET0_TX_CLK, SCK5, CTS8#/SS8#, CTS10#/SS10#, SSLA0-A.
49 PC3 bidirectional Port PC3 with A19, MTIOC4D, TCLKB, PO24, ET0_TX_ER, TXD5/SMOSI5/SSDA5.
50 PC2 bidirectional Port PC2 with A18, MTIOC4B, TCLKA, PO21, ET0_RX_DV, RXD5/SMISO5/SSCL5, SSLA3-A.
51 PC1 bidirectional Port PC1 with A17, MTIOC3A, TCLKD, PO18, ET0_ERXD2, SCK5, SSLA2-A, IRQ12.
52 PC0 bidirectional Port PC0 with A16, MTIOC3C, TCLKC, PO17, ET0_ERXD3, CTS5#/RTS5#/SS5#, SSLA1-A, IRQ14.
53 PB7 bidirectional Port PB7 with A15, MTIOC3B, TIOCB5, PO31, ET0_CRS, TXD9, TXD11, SDSI_D1-B.
54 PB6 bidirectional Port PB6 with A14, MTIOC3D, TIOCA5, PO30, ET0_ETXD1, RXD9, RXD11, SDSI_D0-B.
55 PB5 bidirectional Port PB5 with A13, MTIOC2A, MTIOC1B, TIOCB4, TMRI1, PO29, POE4#, ET0_ETXD0, SCK9/SCK11, SDSI_CLK-B, LCD_CLK-B.
56 PB4 bidirectional Port PB4 with A12, TIOCA4, PO28, ET0_TX_EN, CTS9#/SS9#, SS11#/CTS11#, SDSI_CMD-B, LCD_TCON0-B.
57 PB3 bidirectional Port PB3 with A11, MTIOC0A, MTIOC4A, TIOCD3, TCLKD, TMO0, PO27, POE11#, ET0_RX_ER, SCK6, SDSI_D3-B, LCD_TCON1-B.
58 PB2 bidirectional Port PB2 with A10, TIOCC3, TCLKC, PO26, ET0_RX_CLK, CTS6#/RTS6#/SS6#, SDSI_D2-B, LCD_TCON2-B.
59 PB1 bidirectional Port PB1 with A9, MTIOC0C, MTIOC4C, TIOCB3, TMCI0, PO25, ET0_ERXD0, TXD6, LCD_TCON3-B, IRQ4-DS.
60 VCC power_in Power supply pin (2.7 to 3.6 V); connect to VSS via a 0.1-μF multilayer ceramic capacitor placed close to the pin.
61 PB0 bidirectional Port PB0 with A8, MTIC5W, TIOCA3, PO24, ET0_ERXD1, RXD6, LCD_DATA0-B, IRQ12.
62 VSS power_in Ground pin; connect to the system ground (0 V).
63 PA7 bidirectional Port PA7 with A7, TIOCB2, PO23, ET0_WOL, MISOA-B, LCD_DATA1-B.
64 PA6 bidirectional Port PA6 with A6, MTIC5V, MTCLKB, TIOCA2, TMCI3, PO22, POE10#, ET0_EXOUT, CTS5#/SS5#, MOSIA-B, LCD_DATA2-B.
65 PA5 bidirectional Port PA5 with A5, MTIOC6B, TIOCB1, PO21, ET0_LINKSTA, RSPCKA-B, LCD_DATA3-B.
66 PA4 bidirectional Port PA4 with A4, MTIC5U, MTCLKA, TIOCA1, TMRI0, PO20, ET0_MDC, TXD5, SSLA0-B, LCD_DATA4-B, IRQ5-DS.
67 PA3 bidirectional Port PA3 with A3, MTIOC0D, MTCLKD, TIOCD0, TCLKB, PO19, ET0_MDIO, RXD5, LCD_DATA5-B, IRQ6-DS.
68 PA2 bidirectional Port PA2 with A2, MTIOC7A, PO18, RXD5/SMISO5/SSCL5, SSLA3-B, LCD_DATA6-B.
69 PA1 bidirectional Port PA1 with A1, MTIOC0B, MTCLKC, MTIOC7B, TIOCB0, PO17, ET0_WOL, SCK5, SSLA2-B, LCD_DATA7-B, IRQ11.
70 PA0 bidirectional Port PA0 with BC0#/A0, MTIOC4A, MTIOC6D, TIOCA0, PO16, CACREF, ET0_TX_EN, SSLA1-B, LCD_DATA8-B.
71 PE7 bidirectional Port PE7 with D15[A15/D15], MTIOC6A, TOC1, MISOB-B, SDHI_WP, MMC_RES#-B, LCD_DATA9-B, IRQ7, AN105.
72 PE6 bidirectional Port PE6 with D14[A14/D14], MTIOC6C, TIC1, MOSIB-B, SDHI_CD, MMC_CD-B, LCD_DATA10-B, IRQ6, AN104.
73 PE5 bidirectional Port PE5 with D13[A13/D13], MTIOC4C, MTIOC2B, ET0_RX_CLK, REF50CK0, RSPCKB-B, LCD_DATA11-B, IRQ5, AN103.
74 PE4 bidirectional Port PE4 with D12[A12/D12], MTIOC4D, MTIOC1A, PO28, ET0_ERXD2, SSLB0-B, LCD_DATA12-B, AN102.
75 PE3 bidirectional Port PE3 with D11[A11/D11], MTIOC4B, PO26, TOC3, POE8#, ET0_ERXD3, CTS12#/RTS12#/SS12#, MMC_D7-B, LCD_DATA13-B, AN101.
76 PE2 bidirectional Port PE2 with D10[A10/D10], MTIOC4A, PO23, TIC3, RXD12, SSLB3-B, MMC_D6-B, LCD_DATA14-B, IRQ7-DS, AN100.
77 PE1 bidirectional Port PE1 with D9[A9/D9], MTIOC4C, MTIOC3B, PO18, TXD12, SSLB2-B, MMC_D5-B, LCD_DATA15-B, ANEX1.
78 PE0 bidirectional Port PE0 with D8[A8/D8], MTIOC3D, SCK12, SSLB1-B, MMC_D4-B, LCD_DATA16-B, ANEX0.
79 PD7 bidirectional Port PD7 with D7[A7/D7], MTIC5U, POE0#, SSLC3-A, QMI-B/QIO1-B, SDHI_D1-B, MMC_D1-B, LCD_DATA17-B, IRQ7, AN107.
80 PD6 bidirectional Port PD6 with D6[A6/D6], MTIC5V, MTIOC8A, POE4#, SSLC2-A, QMO-B/QIO0-B, SDHI_D0-B, MMC_D0-B, LCD_DATA18-B, IRQ6, AN106.
81 PD5 bidirectional Port PD5 with D5[A5/D5], MTIC5W, MTIOC8C, POE10#, SSLC1-A, QSPCLK-B, SDHI_CLK-B, MMC_CLK-B, LCD_DATA19-B, IRQ5, AN113.
82 PD4 bidirectional Port PD4 with D4[A4/D4], MTIOC8B, POE11#, SSLC0-A, QSSL-B, SDHI_CMD-B, MMC_CMD-B, LCD_DATA20-B, IRQ4, AN112.
83 PD3 bidirectional Port PD3 with D3[A3/D3], MTIOC8D, TOC2, POE8#, RSPCKC-A, QIO3-B, SDHI_D3-B, MMC_D3-B, LCD_DATA21-B, IRQ3, AN111.
84 PD2 bidirectional Port PD2 with D2[A2/D2], MTIOC4D, TIC2, MISOC-A, CRX0, QIO2-B, SDHI_D2-B, MMC_D2-B, LCD_DATA22-B, IRQ2, AN110.
85 PD1 bidirectional Port PD1 with D1[A1/D1], MTIOC4B, POE0#, MOSIC-A, CTX0, LCD_DATA23-B, IRQ1, AN109.
86 PD0 bidirectional Port PD0 with D0[A0/D0], POE4#, LCD_EXTCLK-B, IRQ0, AN108.
87 P47 bidirectional Port P47 with IRQ15-DS and analog input AN007.
88 P46 bidirectional Port P46 with IRQ14-DS and analog input AN006.
89 P45 bidirectional Port P45 with IRQ13-DS and analog input AN005.
90 P44 bidirectional Port P44 with IRQ12-DS and analog input AN004.
91 P43 bidirectional Port P43 with IRQ11-DS and analog input AN003.
92 P42 bidirectional Port P42 with IRQ10-DS and analog input AN002.
93 P41 bidirectional Port P41 with IRQ9-DS and analog input AN001.
94 VREFL0 power_in Analog reference ground for the 12-bit A/D converter unit 0; connect to VSS if the A/D converter is not used.
95 P40 bidirectional Port P40 with IRQ8-DS and analog input AN000.
96 VREFH0 power_in Analog reference voltage supply for the 12-bit A/D converter unit 0; connect to VCC if the A/D converter is not used.
97 AVCC0 power_in Analog supply for the 12-bit A/D converter unit 0; connect to a branch of VCC and to AVSS0 via a 0.1-μF ceramic capacitor.
98 P07 bidirectional Port P07 with IRQ15 and ADTRG0# external A/D trigger input.
99 AVSS0 power_in Analog ground for the 12-bit A/D converter unit 0; connect to a branch of VSS.
100 P05 bidirectional Port P05 with IRQ13 and D/A converter output DA1.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC, VCC_USB 2.7 3.6 V 154
VBATT power supply voltage VBATT 2 3.6 V 154
Reference voltage VREFH0 VREFH0 2.7 V max is AVCC0 154
Operating temperature (D version) Topr -40 85 °C 154
Absolute max power supply voltage VCC, VCC_USB -0.3 4 V 154
Absolute max VBATT voltage VBATT -0.3 4 V 154
Absolute max analog power supply voltage AVCC0, AVCC1 -0.3 4 V 154
Absolute max input voltage (except 5 V tolerant ports) Vin -0.3 4 V -0.3 to VCC + 0.3 (up to 4.0) 154
Absolute max input voltage (5 V tolerant ports) Vin -0.3 5.8 V -0.3 to VCC + 4.0 (up to 5.8) 154
Absolute max analog input voltage VAN -0.3 4 V -0.3 to AVCC + 0.3 (up to 4.0) 154
Absolute max reference voltage VREFH0 -0.3 4 V -0.3 to AVCC0 + 0.3 (up to 4.0) 154
Junction temperature (D version) Tj -40 105 °C 154
Storage temperature Tstg -55 125 °C 154
Input high voltage ETHERC input pin VIH 2.3 V ETHERC input pin 155
Input high voltage RIIC (SMBus) VIH 2.1 V RIIC (SMBus) 155
Input low voltage RIIC (SMBus) VIL 0.8 V RIIC (SMBus) 155
Output low voltage all output pins VOL 0.5 V IOL = 1.0 mA 156
Output low voltage RIIC output pin VOL 0.4 V IOL = 3.0 mA 156
Output low voltage RIIC output pin VOL 0.6 V IOL = 6.0 mA 156
Output low voltage RIIC P12/P13 ch0 VOL 0.4 V IOL = 15.0 mA (ICFER.FMPE = 1) 156
Output low voltage RIIC P12/P13 ch0 VOL 0.4 V IOL = 20.0 mA (ICFER.FMPE = 1) 156
Output low voltage ETHERC output pin VOL 0.4 V IOL = 1.0 mA 156
Input leakage current RES#, MD, EMLE, BSCANP, NMI /Iin/ 1 μA Vin = 0 V, Vin = VCC 156
Three-state leakage current (other than 5 V tolerant) /ITSI/ 1 μA Vin = 0 V, Vin = VCC 156
Three-state leakage current (5 V tolerant ports) /ITSI/ 5 μA Vin = 0 V, Vin = 5.5 V 156
Input pull-up resistor current (other than P35) Ip -300 -10 μA VCC = 2.7 to 3.6 V, Vin = 0 V 156
Input pull-down resistor current EMLE, BSCANP Ip 10 300 μA Vin = VCC 156
Input capacitance (all input pins except listed) Cin 8 pF Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25°C 156
Input capacitance (ports 03, 05, 12, 13, 16, 17, 20, 21, EMLE, BSCANP, USB0_DP, USB0_DM) Cin 16 pF Vbias = 0 V, Vamp = 20 mV, f = 1 MHz, Ta = 25°C 156
Thermal resistance 100-pin LFQFP (PLQP0100KB-B) θja 52.5 °C/W JESD51-2 and JESD51-7 compliant 161
Thermal characterization parameter 100-pin LFQFP (PLQP0100KB-B) Ψjt 1.5 °C/W JESD51-2 and JESD51-7 compliant 161

CAD (KiCad official)

  • Symbol: R5F5651CDDFP#10
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: r5f5651cddfp-10-etched.step / r5f5651cddfp-10-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f5651cddfp-10.step / r5f5651cddfp-10.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (246 pp, sha256 739934bba43627d5, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF