main
Ray Publish 0.1.0 d9ddd7d

R5F562N8BDFP#V0

RENESAS · Pre-ordered MCUs · LQFP-100(14x14)

R5F562N8BDFP#V0 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Power supply pin, connect to the system power supply.
2 EMLE input Enables on-chip emulator connection; drive high when the emulator is used, low when not used.
3 VSS power_in Ground pin, connect to the system power supply (0 V).
4 MDE input Operating mode setting pin; its level must not be changed during operation.
5 VCL passive Connect to VSS via a 0.1 uF capacitor placed close to the pin.
6 MD1 input Operating mode setting pin; its level must not be changed during operation.
7 MD0 input Operating mode setting pin; its level must not be changed during operation.
8 XCIN input Sub-clock oscillator pin; connect a crystal resonator between XCOUT and XCIN.
9 XCOUT output Sub-clock oscillator pin; connect a crystal resonator between XCOUT and XCIN.
10 RES# input Reset input; the LSI enters the reset state when this signal goes low.
11 XTAL output Crystal resonator pin for the main clock.
12 VSS power_in Ground pin, connect to the system power supply (0 V).
13 EXTAL input Crystal resonator pin; an external clock signal can be input through this pin.
14 VCC power_in Power supply pin, connect to the system power supply.
15 P35/NMI input 1-bit input port and non-maskable interrupt request input.
16 P34 bidirectional I/O port P34 with MTU, TMR, PPG, SCI6 clock, IRQ4-A and TRST# on-chip emulator function.
17 P33 bidirectional I/O port P33 with MTU, PPG, CAN receive, SCI6 receive and IRQ3-A functions.
18 P32 bidirectional I/O port P32 with MTU, PPG, RTC 1-Hz output, CAN transmit, SCI6 transmit and IRQ2-A functions.
19 P31 bidirectional I/O port P31 with MTU, TMR, PPG, RSPI SSLB0-A, IRQ1 and TMS on-chip emulator function.
20 P30 bidirectional I/O port P30 with MTU, TMR, PPG, SCI1 receive, RSPI MISOB-A, IRQ0 and TDI on-chip emulator function.
21 P27 bidirectional I/O port P27 with CS7# chip select, MTU, PPG, RSPCKB-A, SCK1 and TCK on-chip emulator function.
22 P26 bidirectional I/O port P26 with CS6# chip select, MTU, TMR, PPG, MOSIB-A, TxD1 and TDO on-chip emulator output.
23 P25 bidirectional I/O port P25 with CS5# chip select, USB0 D+ pull-down enable, MTU, PPG, RxD3 and ADTRG0#-B.
24 P24 bidirectional I/O port P24 with CS4# chip select, USB0 VBUS enable, MTU, TMR, PPG and SCK3.
25 P23 bidirectional I/O port P23 with USB0 D+ pull-up enable, MTU, PPG and TxD3 functions.
26 P22 bidirectional I/O port P22 with USB0 D- pull-down enable, MTU, TMR, PPG and SCK0 functions.
27 P21 bidirectional I/O port P21 with USB0_EXICEN (OTG power supply IC connection), MTU, TMR, PPG and RxD0.
28 P20 bidirectional I/O port P20 with USB0_ID (OTG power supply IC connection), MTU, TMR, PPG and TxD0.
29 PLLVCC power_in Power supply pin for the PLL circuit, connect to the system power supply.
30 P16 bidirectional I/O port P16 with USB0 VBUS detection, over-current/VBUS enable, MTU, TMR, PPG and IRQ6-B.
31 PLLVSS power_in Ground pin for the PLL circuit.
32 P14 bidirectional I/O port P14 with USB0 over-current input, D+ pull-up enable, MTU, TMR, PPG and IRQ4-B.
33 P13 bidirectional I/O port P13 with MTU, TMR, PPG, I2C SDA0, TxD2-A, IRQ3-B and ADTRG1# A/D trigger.
34 P12 bidirectional I/O port P12 with TMR clock input, I2C SCL0, RxD2-A and IRQ2-B.
35 VCC_USB power_in USB power supply pin; connect to the system power supply even when USB is not used.
36 USB0_DM bidirectional Inputs or outputs D- data for the USB bus.
37 USB0_DP bidirectional Inputs or outputs D+ data for the USB bus.
38 VSS_USB power_in USB ground pin; connect to the system power supply (0 V) even when USB is not used.
39 P55/WAIT#-B/MTIOC4D-B bidirectional I/O port P55 with WAIT#-B external wait input and MTU function.
40 P54/MTIOC4B-B bidirectional I/O port P54 with MTIOC4B-B MTU function.
41 P53/BCLK output Outputs the external bus clock for external devices (pin is also 1-bit input port P53).
42 P52 bidirectional I/O port P52 with RD# read strobe, RSPI SSLB3-A and RxD2-B.
43 P51 bidirectional I/O port P51 with WR1#/BC1# strobe, WAIT#-D, RSPI SSLB2-A and SCK2.
44 P50 bidirectional I/O port P50 with WR0#/WR# write strobe, RSPI SSLB1-A and TxD2-B.
45 PC7 bidirectional I/O port PC7 with address A23, CS0#, Ethernet collision input, MTU and MISOA-A.
46 PC6 bidirectional I/O port PC6 with address A22, CS1#, Ethernet transmit data ET_ETXD3, MTU and MOSIA-A.
47 PC5 bidirectional I/O port PC5 with address A21, CS2#, WAIT#-C, Ethernet ET_ETXD2, MTU and RSPCKA-A.
48 PC4 bidirectional I/O port PC4 with address A20, CS3#, Ethernet transmit clock input, MTU clock and SSLA0-A.
49 PC3 bidirectional I/O port PC3 with address A19, Ethernet transmit error output, MTU clock and TxD5.
50 PC2 bidirectional I/O port PC2 with address A18, Ethernet ET_RX_DV, MTU clock, SSLA3-A and RxD5.
51 PC1 bidirectional I/O port PC1 with address A17, Ethernet receive data ET_ERXD2, MTU clock, SSLA2-A and SCK5.
52 PC0 bidirectional I/O port PC0 with address A16, Ethernet receive data ET_ERXD3, MTU clock and SSLA1-A.
53 PB7 bidirectional I/O port PB7 with address A15, Ethernet carrier sense/RMII CRS_DV, MTU and PPG.
54 PB6 bidirectional I/O port PB6 with address A14, Ethernet transmit data 1, MTU and PPG.
55 PB5 bidirectional I/O port PB5 with address A13, Ethernet transmit data 0, MTU and PPG.
56 PB4 bidirectional I/O port PB4 with address A12, Ethernet transmit enable, MTU and PPG.
57 PB3 bidirectional I/O port PB3 with address A11, Ethernet receive error input, MTU and PPG.
58 PB2 bidirectional I/O port PB2 with address A10, Ethernet receive clock/50-MHz RMII reference clock input, MTU and PPG.
59 PB1 bidirectional I/O port PB1 with address A9, Ethernet receive data 0, MTU and PPG.
60 VCC power_in Power supply pin, connect to the system power supply.
61 PB0 bidirectional I/O port PB0 with address A8, Ethernet receive data 1, MTU and PPG.
62 VSS power_in Ground pin, connect to the system power supply (0 V).
63 PA7 bidirectional I/O port PA7 with address A7, Ethernet Magic Packet output, MTU, PPG and MISOA-B.
64 PA6 bidirectional I/O port PA6 with address A6, Ethernet general-purpose output, MTU, PPG and MOSIA-B.
65 PA5 bidirectional I/O port PA5 with address A5, Ethernet link status input, MTU, PPG and RSPCKA-B.
66 PA4 bidirectional I/O port PA4 with address A4, Ethernet management clock output, MTU, PPG and SSLA0-B.
67 PA3 bidirectional I/O port PA3 with address A3, Ethernet management data I/O, MTU and PPG.
68 PA2 bidirectional I/O port PA2 with address A2, MTU, PPG and SSLA3-B.
69 PA1 bidirectional I/O port PA1 with address A1, MTU, PPG and SSLA2-B.
70 PA0 bidirectional I/O port PA0 with address A0/BC0#, MTU, PPG and SSLA1-B.
71 PE7/D15/MISOB-B/IRQ7 bidirectional I/O port PE7 with data bus D15, MISOB-B and IRQ7.
72 PE6/D14/MOSIB-B/IRQ6-A bidirectional I/O port PE6 with data bus D14, MOSIB-B and IRQ6-A.
73 PE5/D13/RSPCKB-B/IRQ5 bidirectional I/O port PE5 with data bus D13, RSPCKB-B and IRQ5.
74 PE4/D12/SSLB0-B bidirectional I/O port PE4 with data bus D12 and RSPI SSLB0-B.
75 PE3/D11/POE8# bidirectional I/O port PE3 with data bus D11 and POE8# port output enable input.
76 PE2 bidirectional I/O port PE2 with data bus D10, POE9# and SSLB3-B.
77 PE1/D9/SSLB2-B bidirectional I/O port PE1 with data bus D9 and RSPI SSLB2-B.
78 PE0/D8/SSLB1-B bidirectional I/O port PE0 with data bus D8 and RSPI SSLB1-B.
79 PD7/D7/MTIC5U/POE0# bidirectional I/O port PD7 with data bus D7, MTIC5U input capture and POE0#.
80 PD6/D6/MTIC5V/POE1# bidirectional I/O port PD6 with data bus D6, MTIC5V input capture and POE1#.
81 PD5/D5/MTIC5W/POE2# bidirectional I/O port PD5 with data bus D5, MTIC5W input capture and POE2#.
82 PD4/D4/MTIC11U-B/POE3# bidirectional I/O port PD4 with data bus D4, MTIC11U-B input capture and POE3#.
83 PD3/D3/MTIC11V-B/POE4# bidirectional I/O port PD3 with data bus D3, MTIC11V-B input capture and POE4#.
84 PD2/D2/MTIC11W-B/POE5# bidirectional I/O port PD2 with data bus D2, MTIC11W-B input capture and POE5#.
85 PD1/D1/POE6# bidirectional I/O port PD1 with data bus D1 and POE6#.
86 PD0/D0/POE7# bidirectional I/O port PD0 with data bus D0 and POE7#.
87 P47/AN7/IRQ15-B bidirectional I/O port P47 with A/D converter analog input AN7 and IRQ15-B.
88 P46/AN6/IRQ14 bidirectional I/O port P46 with A/D converter analog input AN6 and IRQ14.
89 P45/AN5/IRQ13-B bidirectional I/O port P45 with A/D converter analog input AN5 and IRQ13-B.
90 P44/AN4/IRQ12 bidirectional I/O port P44 with A/D converter analog input AN4 and IRQ12.
91 P43/AN3/IRQ11 bidirectional I/O port P43 with A/D converter analog input AN3 and IRQ11.
92 P42/AN2/IRQ10 bidirectional I/O port P42 with A/D converter analog input AN2 and IRQ10.
93 P41/AN1/IRQ9 bidirectional I/O port P41 with A/D converter analog input AN1 and IRQ9.
94 VREFL power_in Reference ground for the A/D and D/A converters; connect to analog reference power supply (0 V).
95 P40/AN0/IRQ8 bidirectional I/O port P40 with A/D converter analog input AN0 and IRQ8.
96 VREFH power_in Reference power supply for the A/D and D/A converters; connect to system power supply when converters are unused.
97 AVCC power_in Analog power supply for the A/D and D/A converters; connect to system power supply when converters are unused.
98 P07/ADTRG0#-A/IRQ15-A bidirectional I/O port P07 with A/D external trigger input ADTRG0#-A and IRQ15-A.
99 AVSS power_in Ground pin for the A/D and D/A converters; connect to system power supply (0 V).
100 P05/DA1/IRQ13-A bidirectional I/O port P05 with D/A converter output DA1 and IRQ13-A.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

CAD (KiCad official)

  • Symbol: R5F562N8BDFP#V0
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: r5f562n8bdfp-v0-etched.step / r5f562n8bdfp-v0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f562n8bdfp-v0.step / r5f562n8bdfp-v0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (150 pp, sha256 f3218395c57fbb55, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF