Generated by kicad-footprint-generator · KiCad file format 20260206
R5F524TBADFP#31
RENESAS · Pre-ordered MCUs · LQFP-100(14x14)
R5F524TBADFP#31 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE5 | bidirectional | I/O port PE5 with alternate function IRQ0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 2 | P02 | bidirectional | I/O port P02 with functions MTIOC9D, MTIOC9D#, CTS1#, RTS1#, SS1#, IRQ5, ADST0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 3 | VSS | power_in | Ground pin, connected to the system power supply at 0 V. |
| 4 | P00 | bidirectional | I/O port P00 with functions IRQ2, ADST1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 5 | VCL | passive | Connect to VSS through a 4.7 μF smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin. |
| 6 | MD | input | Operating mode setting pin; the signal level must not be changed during operation. |
| 7 | P01 | bidirectional | I/O port P01 with functions POE12#, IRQ4, ADST2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 8 | PE4 | bidirectional | I/O port PE4 with functions MTCLKC, MTCLKC#, POE10#, IRQ1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 9 | PE3 | bidirectional | I/O port PE3 with functions MTCLKD, MTCLKD#, POE11#, IRQ2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 10 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 11 | XTAL/P37 | passive | Crystal connection pin for the main clock oscillator, also usable as general I/O port P37. |
| 12 | VSS | power_in | Ground pin, connected to the system power supply at 0 V. |
| 13 | EXTAL/P36 | input | External clock input pin (up to 20 MHz), also usable as general I/O port P36. |
| 14 | VCC | power_in | Power supply pin, connected to the system power supply (2.7 V to 5.5 V). |
| 15 | PE2 | input | Input-only port PE2 with functions POE10# and NMI; non-maskable interrupt request pin. |
| 16 | PE1 | bidirectional | I/O port PE1 with functions MTIOC9D, MTIOC9D#, TMO5, CTS5#, RTS5#, SS5#, SSLA3; 5-V tolerant, input pull-up, switchable drive capacity. |
| 17 | PE0 | bidirectional | I/O port PE0 with functions MTIOC9B, MTIOC9B#, TMCI1, TMCI5, RXD5, SMISO5, SSCL5, SSLA2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 18 | PD7 | bidirectional | I/O port PD7 with functions MTIOC9A, MTIOC9A#, TMRI1, TMRI5, GTIOC3A, GTIOC3A#, TXD5, SMOSI5, SSDA5, SSLA1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 19 | PD6 | bidirectional | I/O port PD6 with functions MTIOC9C, MTIOC9C#, TMO1, GTIOC3B, GTIOC3B#, CTS1#, RTS1#, SS1#, SSLA0, IRQ5, ADST0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 20 | PD5 | bidirectional | I/O port PD5 with functions TMRI0, TMRI6, GTECLKA, RXD1, SMISO1, SSCL1, IRQ3; 5-V tolerant, input pull-up, switchable drive capacity. |
| 21 | PD4 | bidirectional | I/O port PD4 with functions TMCI0, TMCI6, GTECLKB, SCK1, IRQ2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 22 | PD3 | bidirectional | I/O port PD3 with functions TMO0, GTECLKC, TXD1, SMOSI1, SSDA1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 23 | PD2 | bidirectional | I/O port PD2 with functions TMCI1, TMO4, GTIOC0A, GTIOC0A#, SCK5, MOSIA; 5-V tolerant, input pull-up, switchable drive capacity. |
| 24 | PD1 | bidirectional | I/O port PD1 with functions TMO2, GTIOC0B, GTIOC0B#, MISOA; 5-V tolerant, input pull-up, switchable drive capacity. |
| 25 | PD0 | bidirectional | I/O port PD0 with functions TMO6, GTIOC1A, GTIOC1A#, RSPCKA; 5-V tolerant, input pull-up, switchable drive capacity. |
| 26 | PB7 | bidirectional | I/O port PB7 with functions GTIOC1B, GTIOC1B#, SCK5; 5-V tolerant, input pull-up, switchable drive capacity. |
| 27 | PB6 | bidirectional | I/O port PB6 with functions GTIOC2A, GTIOC2A#, RXD5, SMISO5, SSCL5, IRQ5; 5-V tolerant, input pull-up, switchable drive capacity. |
| 28 | PB5 | bidirectional | I/O port PB5 with functions GTIOC2B, GTIOC2B#, TXD5, SMOSI5, SSDA5; 5-V tolerant, input pull-up, switchable drive capacity. |
| 29 | VCC | power_in | Power supply pin, connected to the system power supply (2.7 V to 5.5 V). |
| 30 | PB4 | bidirectional | I/O port PB4 with functions POE8#, GTETRG, GTECLKD, CTS5#, RTS5#, SS5#, IRQ3; 5-V tolerant, input pull-up, switchable drive capacity. |
| 31 | VSS | power_in | Ground pin, connected to the system power supply at 0 V. |
| 32 | PB3 | bidirectional | I/O port PB3 with functions MTIOC0A, MTIOC0A#, CACREF, SCK6, RSPCKA; 5-V tolerant, input pull-up, switchable drive capacity. |
| 33 | PB2 | bidirectional | I/O port PB2 with functions MTIOC0B, MTIOC0B#, TMRI0, ADSM0, TXD6, SMOSI6, SSDA6, SDA0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 34 | PB1 | bidirectional | I/O port PB1 with functions MTIOC0C, MTIOC0C#, TMCI0, ADSM1, RXD6, SMISO6, SSCL6, SCL0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 35 | PB0 | bidirectional | I/O port PB0 with functions MTIOC0D, MTIOC0D#, TMO0, TXD6, SMOSI6, SSDA6, MOSIA, ADTRG2#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 36 | PA5 | bidirectional | I/O port PA5 with functions MTIOC1A, MTIOC1A#, TMCI3, RXD6, SMISO6, SSCL6, MISOA, IRQ1, ADTRG1#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 37 | PA4 | bidirectional | I/O port PA4 with functions MTIOC1B, MTIOC1B#, TMCI7, SCK6, RSPCKA, ADTRG0#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 38 | PA3 | bidirectional | I/O port PA3 with functions MTIOC2A, MTIOC2A#, TMRI7, GTADSM0, SSLA0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 39 | PA2 | bidirectional | I/O port PA2 with functions MTIOC2B, MTIOC2B#, TMO7, GTADSM1, CTS6#, RTS6#, SS6#, SSLA1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 40 | PA1 | bidirectional | I/O port PA1 with functions MTIOC6A, MTIOC6A#, TMO4, SSLA2, CRXD0, ADTRG0#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 41 | PA0 | bidirectional | I/O port PA0 with functions MTIOC6C, MTIOC6C#, TMO2, SSLA3, CTXD0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 42 | VCC | power_in | Power supply pin, connected to the system power supply (2.7 V to 5.5 V). |
| 43 | P96 | bidirectional | I/O port P96 with functions POE4#, IRQ4; 5-V tolerant, input pull-up, switchable drive capacity. |
| 44 | VSS | power_in | Ground pin, connected to the system power supply at 0 V. |
| 45 | P95 | bidirectional | I/O port P95 with functions MTIOC6B, MTIOC6B#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 46 | P94 | bidirectional | I/O port P94 with functions MTIOC7A, MTIOC7A#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 47 | P93 | bidirectional | I/O port P93 with functions MTIOC7B, MTIOC7B#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 48 | P92 | bidirectional | I/O port P92 with functions MTIOC6D, MTIOC6D#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 49 | P91 | bidirectional | I/O port P91 with functions MTIOC7C, MTIOC7C#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 50 | P90 | bidirectional | I/O port P90 with functions MTIOC7D, MTIOC7D#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 51 | P76 | bidirectional | I/O port P76 with functions MTIOC4D, MTIOC4D#, GTIOC2B, GTIOC2B#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 52 | P75 | bidirectional | I/O port P75 with functions MTIOC4C, MTIOC4C#, GTIOC1B, GTIOC1B#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 53 | P74 | bidirectional | I/O port P74 with functions MTIOC3D, MTIOC3D#, GTIOC0B, GTIOC0B#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 54 | P73 | bidirectional | I/O port P73 with functions MTIOC4B, MTIOC4B#, GTIOC2A, GTIOC2A#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 55 | P72 | bidirectional | I/O port P72 with functions MTIOC4A, MTIOC4A#, GTIOC1A, GTIOC1A#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 56 | P71 | bidirectional | I/O port P71 with functions MTIOC3B, MTIOC3B#, GTIOC0A, GTIOC0A#; 5-V tolerant, input pull-up, switchable drive capacity. |
| 57 | P70 | bidirectional | I/O port P70 with functions POE0#, IRQ5; 5-V tolerant, input pull-up, switchable drive capacity. |
| 58 | P33 | bidirectional | I/O port P33 with functions MTIOC3A, MTIOC3A#, MTCLKA, MTCLKA#, TMO0, SSLA3; 5-V tolerant, input pull-up, switchable drive capacity. |
| 59 | P32 | bidirectional | I/O port P32 with functions MTIOC3C, MTIOC3C#, MTCLKB, MTCLKB#, TMO6, SSLA2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 60 | VCC | power_in | Power supply pin, connected to the system power supply (2.7 V to 5.5 V). |
| 61 | P31 | bidirectional | I/O port P31 with functions MTIOC0A, MTIOC0A#, MTCLKC, MTCLKC#, TMRI6, SSLA1, IRQ6; 5-V tolerant, input pull-up, switchable drive capacity. |
| 62 | VSS | power_in | Ground pin, connected to the system power supply at 0 V. |
| 63 | P30 | bidirectional | I/O port P30 with functions MTIOC0B, MTIOC0B#, MTCLKD, MTCLKD#, TMCI6, SSLA0, IRQ7, COMP3; 5-V tolerant, input pull-up, switchable drive capacity. |
| 64 | P24 | bidirectional | I/O port P24 with functions MTIC5U, MTIC5U#, TMCI2, TMO6, RSPCKA, COMP0, DA0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 65 | P23 | bidirectional | I/O port P23 with functions MTIC5V, MTIC5V#, TMO2, CACREF, MOSIA, COMP1, DA1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 66 | P22 | bidirectional | I/O port P22 with functions MTIC5W, MTIC5W#, TMRI2, TMO4, MISOA, ADTRG2#, COMP2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 67 | P21 | bidirectional | I/O port P21 with functions MTCLKA, MTCLKA#, MTIOC9A, MTIOC9A#, TMCI4, IRQ6, ADTRG1#, AN116; 5-V tolerant, input pull-up, switchable drive capacity. |
| 68 | P20 | bidirectional | I/O port P20 with functions MTCLKB, MTCLKB#, MTIOC9C, MTIOC9C#, TMRI4, IRQ7, ADTRG0#, AN016; 5-V tolerant, input pull-up, switchable drive capacity. |
| 69 | P65 | bidirectional | I/O port P65 with analog input AN205; 5-V tolerant, input pull-up, switchable drive capacity. |
| 70 | P64 | bidirectional | I/O port P64 with analog input AN204; 5-V tolerant, input pull-up, switchable drive capacity. |
| 71 | AVCC2 | power_in | Analog power and reference power supply pin for 12-bit A/D converter unit 2; connect to AVCC0, AVCC1 or VREF when unit 2 is not used. |
| 72 | VREF | power_in | Analog power supply pin for comparator C and 8-bit D/A converter; connect to AVCC0, AVCC1 or AVCC2 when they are not used. |
| 73 | AVSS2 | power_in | Analog and reference ground pin for 12-bit A/D converter unit 2, comparator C and 8-bit D/A converter. |
| 74 | P63 | bidirectional | I/O port P63 with functions AN203, IRQ7; 5-V tolerant, input pull-up, switchable drive capacity. |
| 75 | P62 | bidirectional | I/O port P62 with functions AN202, IRQ6; 5-V tolerant, input pull-up, switchable drive capacity. |
| 76 | P61 | bidirectional | I/O port P61 with functions AN201, IRQ5; 5-V tolerant, input pull-up, switchable drive capacity. |
| 77 | P60 | bidirectional | I/O port P60 with functions AN200, IRQ4; 5-V tolerant, input pull-up, switchable drive capacity. |
| 78 | P55 | bidirectional | I/O port P55 with functions AN211, IRQ3; 5-V tolerant, input pull-up, switchable drive capacity. |
| 79 | P54 | bidirectional | I/O port P54 with functions AN210, IRQ2; 5-V tolerant, input pull-up, switchable drive capacity. |
| 80 | P53 | bidirectional | I/O port P53 with functions AN209, IRQ1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 81 | P52 | bidirectional | I/O port P52 with functions AN208, IRQ0; 5-V tolerant, input pull-up, switchable drive capacity. |
| 82 | P51 | bidirectional | I/O port P51 with analog input AN207; 5-V tolerant, input pull-up, switchable drive capacity. |
| 83 | P50 | bidirectional | I/O port P50 with analog input AN206; 5-V tolerant, input pull-up, switchable drive capacity. |
| 84 | P47 | bidirectional | I/O port P47 with analog input AN103; 5-V tolerant, input pull-up, switchable drive capacity. |
| 85 | P46 | bidirectional | I/O port P46 with functions AN102, CMPC12, CMPC13, CMPC30, CMPC31; 5-V tolerant, input pull-up, switchable drive capacity. |
| 86 | P45 | bidirectional | I/O port P45 with functions AN101, CMPC02, CMPC03, CMPC20, CMPC21; 5-V tolerant, input pull-up, switchable drive capacity. |
| 87 | P44 | bidirectional | I/O port P44 with functions AN100, CMPC10, CMPC11, CMPC32, CMPC33; 5-V tolerant, input pull-up, switchable drive capacity. |
| 88 | P43 | bidirectional | I/O port P43 with analog input AN003; 5-V tolerant, input pull-up, switchable drive capacity. |
| 89 | P42 | bidirectional | I/O port P42 with analog input AN002; 5-V tolerant, input pull-up, switchable drive capacity. |
| 90 | P41 | bidirectional | I/O port P41 with analog input AN001; 5-V tolerant, input pull-up, switchable drive capacity. |
| 91 | P40 | bidirectional | I/O port P40 with functions AN000, CMPC00, CMPC01, CMPC22, CMPC23; 5-V tolerant, input pull-up, switchable drive capacity. |
| 92 | AVCC1 | power_in | Analog power and reference power supply pin for 12-bit A/D converter unit 1; connect to AVCC0, AVCC2 or VREF when unit 1 is not used. |
| 93 | AVCC0 | power_in | Analog power and reference power supply pin for 12-bit A/D converter unit 0; connect to AVCC1, AVCC2 or VREF when unit 0 is not used. |
| 94 | AVSS0 | power_in | Analog and reference ground pin for 12-bit A/D converter unit 0; connect to AVSS1 or AVSS2 when unit 0 is not used. |
| 95 | AVSS1 | power_in | Analog and reference ground pin for 12-bit A/D converter unit 1; connect to AVSS0 or AVSS2 when unit 1 is not used. |
| 96 | P82 | bidirectional | I/O port P82 with functions MTIC5U, MTIC5U#, TMO4, SCK6; 5-V tolerant, input pull-up, switchable drive capacity. |
| 97 | P81 | bidirectional | I/O port P81 with functions MTIC5V, MTIC5V#, TMCI4, TXD6, SMOSI6, SSDA6; 5-V tolerant, input pull-up, switchable drive capacity. |
| 98 | P80 | bidirectional | I/O port P80 with functions MTIC5W, MTIC5W#, TMRI4, RXD6, SMISO6, SSCL6; 5-V tolerant, input pull-up, switchable drive capacity. |
| 99 | P11 | bidirectional | I/O port P11 with functions MTIOC3A, MTIOC3A#, MTCLKC, MTCLKC#, TMO3, IRQ1; 5-V tolerant, input pull-up, switchable drive capacity. |
| 100 | P10 | bidirectional | I/O port P10 with functions MTIOC9B, MTIOC9B#, MTCLKD, MTCLKD#, TMRI3, POE12#, CTS6#, RTS6#, SS6#, IRQ0; 5-V tolerant, input pull-up, switchable drive capacity. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | 2.7 | 5.5 | V | 71 | ||
| Power supply voltage | VCC | -0.3 | 6.5 | V | VSS = AVSS0 = AVSS1 = AVSS2 = 0 V | 71 | |
| Analog power supply voltage | AVCC0, AVCC1, AVCC2, VREF | -0.3 | 6.5 | V | VSS = AVSS0 = AVSS1 = AVSS2 = 0 V | 71 | |
| Operating temperature | Topr | -40 | 85 | °C | 71 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 71 | ||
| Input capacitance | Cin | 4 | 15 | pF | All input pins; Vin = 0 mV, f = 1 MHz, Ta = 25°C | 73 | |
| Input pull-up resistor | RU | 10 | 20 | 50 | kΩ | All ports (except for port E2); Vin = 0 V | 73 |
| Input leakage current | /Iin/ | 1 | μA | RES#, MD, port E2; Vin = 0 V, VCC | 73 | ||
| Permissible total consumption power | Pd | 570 | mW | 78 | |||
| Power-on VCC rising gradient at normal startup | SrVCC | 0.02 | 20 | ms/V | At normal startup | 78 | |
| Permissible error of VCL pin external capacitance | CVCL | 3.3 | 4.7 | 6.1 | μF | 79 | |
| Permissible output low current (ports 71 to 76, port 81, ports 90 to 95, port B5, port D3) | IOL | 10 | mA | 80 | |||
| Permissible output low current (other ports, normal output mode) | IOL | 4 | mA | Normal output mode | 80 | ||
| Permissible output low current (other ports, high-drive output mode) | IOL | 8 | mA | High-drive output mode | 80 | ||
| Permissible output low current (total of all output pins) | ΣIOL | 110 | mA | 80 | |||
| Permissible output high current (ports 71 to 76, port 81, ports 90 to 95, port B5, port D3) | IOH | -5 | mA | 80 | |||
| Permissible output high current (other ports, normal output mode) | IOH | -4 | mA | Normal output mode | 80 | ||
| Permissible output high current (other ports, high-drive output mode) | IOH | -8 | mA | High-drive output mode | 80 | ||
| Permissible output high current (total of all output pins) | ΣIOH | -35 | mA | 80 | |||
| Output low voltage (ports 71 to 76, port 81, ports 90 to 95, port B5, port D3) | VOL | 0.8 | V | IOL = 10.0mA | 80 | ||
| Output low voltage (RIIC pins, standard mode) | VOL | 0.4 | V | IOL = 3.0mA | 80 | ||
| Output low voltage (RIIC pins, fast mode) | VOL | 0.6 | V | IOL = 6.0mA | 80 | ||
| Operating frequency, system clock (ICLK) | fmax | 80 | MHz | High-speed operating mode; VCC = 2.7 V to 5.5 V, Ta = -40 to +85°C | 89 | ||
| Main clock oscillator oscillation frequency | fMAIN | 1 | 20 | MHz | 90 | ||
| PLL circuit oscillation frequency | fPLL | 40 | 80 | MHz | 90 | ||
| LOCO clock oscillation frequency | fLOCO | 3.44 | 4 | 4.56 | MHz | 90 | |
| HOCO clock oscillation frequency (32MHz) | fHOCO (32MHz) | 31.68 | 32 | 32.32 | MHz | Ta = -20 to +75°C | 90 |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | 90 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Packaging/external pin surface treatment (lead-free) #3: Tray/Sn (Tin) only | 8 |
CAD (KiCad official)
- Symbol:
R5F524TBADFP#31 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
r5f524tbadfp-31-etched.step/r5f524tbadfp-31-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f524tbadfp-31.step/r5f524tbadfp-31.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (133 pp, sha256
04a171d1ceefd2bc, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).