Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R5F524TBADFP#31

RENESAS · Pre-ordered MCUs · LQFP-100(14x14)

R5F524TBADFP#31 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE5 bidirectional I/O port PE5 with alternate function IRQ0; 5-V tolerant, input pull-up, switchable drive capacity.
2 P02 bidirectional I/O port P02 with functions MTIOC9D, MTIOC9D#, CTS1#, RTS1#, SS1#, IRQ5, ADST0; 5-V tolerant, input pull-up, switchable drive capacity.
3 VSS power_in Ground pin, connected to the system power supply at 0 V.
4 P00 bidirectional I/O port P00 with functions IRQ2, ADST1; 5-V tolerant, input pull-up, switchable drive capacity.
5 VCL passive Connect to VSS through a 4.7 μF smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin.
6 MD input Operating mode setting pin; the signal level must not be changed during operation.
7 P01 bidirectional I/O port P01 with functions POE12#, IRQ4, ADST2; 5-V tolerant, input pull-up, switchable drive capacity.
8 PE4 bidirectional I/O port PE4 with functions MTCLKC, MTCLKC#, POE10#, IRQ1; 5-V tolerant, input pull-up, switchable drive capacity.
9 PE3 bidirectional I/O port PE3 with functions MTCLKD, MTCLKD#, POE11#, IRQ2; 5-V tolerant, input pull-up, switchable drive capacity.
10 RES# input Reset pin; the MCU enters the reset state when this signal goes low.
11 XTAL/P37 passive Crystal connection pin for the main clock oscillator, also usable as general I/O port P37.
12 VSS power_in Ground pin, connected to the system power supply at 0 V.
13 EXTAL/P36 input External clock input pin (up to 20 MHz), also usable as general I/O port P36.
14 VCC power_in Power supply pin, connected to the system power supply (2.7 V to 5.5 V).
15 PE2 input Input-only port PE2 with functions POE10# and NMI; non-maskable interrupt request pin.
16 PE1 bidirectional I/O port PE1 with functions MTIOC9D, MTIOC9D#, TMO5, CTS5#, RTS5#, SS5#, SSLA3; 5-V tolerant, input pull-up, switchable drive capacity.
17 PE0 bidirectional I/O port PE0 with functions MTIOC9B, MTIOC9B#, TMCI1, TMCI5, RXD5, SMISO5, SSCL5, SSLA2; 5-V tolerant, input pull-up, switchable drive capacity.
18 PD7 bidirectional I/O port PD7 with functions MTIOC9A, MTIOC9A#, TMRI1, TMRI5, GTIOC3A, GTIOC3A#, TXD5, SMOSI5, SSDA5, SSLA1; 5-V tolerant, input pull-up, switchable drive capacity.
19 PD6 bidirectional I/O port PD6 with functions MTIOC9C, MTIOC9C#, TMO1, GTIOC3B, GTIOC3B#, CTS1#, RTS1#, SS1#, SSLA0, IRQ5, ADST0; 5-V tolerant, input pull-up, switchable drive capacity.
20 PD5 bidirectional I/O port PD5 with functions TMRI0, TMRI6, GTECLKA, RXD1, SMISO1, SSCL1, IRQ3; 5-V tolerant, input pull-up, switchable drive capacity.
21 PD4 bidirectional I/O port PD4 with functions TMCI0, TMCI6, GTECLKB, SCK1, IRQ2; 5-V tolerant, input pull-up, switchable drive capacity.
22 PD3 bidirectional I/O port PD3 with functions TMO0, GTECLKC, TXD1, SMOSI1, SSDA1; 5-V tolerant, input pull-up, switchable drive capacity.
23 PD2 bidirectional I/O port PD2 with functions TMCI1, TMO4, GTIOC0A, GTIOC0A#, SCK5, MOSIA; 5-V tolerant, input pull-up, switchable drive capacity.
24 PD1 bidirectional I/O port PD1 with functions TMO2, GTIOC0B, GTIOC0B#, MISOA; 5-V tolerant, input pull-up, switchable drive capacity.
25 PD0 bidirectional I/O port PD0 with functions TMO6, GTIOC1A, GTIOC1A#, RSPCKA; 5-V tolerant, input pull-up, switchable drive capacity.
26 PB7 bidirectional I/O port PB7 with functions GTIOC1B, GTIOC1B#, SCK5; 5-V tolerant, input pull-up, switchable drive capacity.
27 PB6 bidirectional I/O port PB6 with functions GTIOC2A, GTIOC2A#, RXD5, SMISO5, SSCL5, IRQ5; 5-V tolerant, input pull-up, switchable drive capacity.
28 PB5 bidirectional I/O port PB5 with functions GTIOC2B, GTIOC2B#, TXD5, SMOSI5, SSDA5; 5-V tolerant, input pull-up, switchable drive capacity.
29 VCC power_in Power supply pin, connected to the system power supply (2.7 V to 5.5 V).
30 PB4 bidirectional I/O port PB4 with functions POE8#, GTETRG, GTECLKD, CTS5#, RTS5#, SS5#, IRQ3; 5-V tolerant, input pull-up, switchable drive capacity.
31 VSS power_in Ground pin, connected to the system power supply at 0 V.
32 PB3 bidirectional I/O port PB3 with functions MTIOC0A, MTIOC0A#, CACREF, SCK6, RSPCKA; 5-V tolerant, input pull-up, switchable drive capacity.
33 PB2 bidirectional I/O port PB2 with functions MTIOC0B, MTIOC0B#, TMRI0, ADSM0, TXD6, SMOSI6, SSDA6, SDA0; 5-V tolerant, input pull-up, switchable drive capacity.
34 PB1 bidirectional I/O port PB1 with functions MTIOC0C, MTIOC0C#, TMCI0, ADSM1, RXD6, SMISO6, SSCL6, SCL0; 5-V tolerant, input pull-up, switchable drive capacity.
35 PB0 bidirectional I/O port PB0 with functions MTIOC0D, MTIOC0D#, TMO0, TXD6, SMOSI6, SSDA6, MOSIA, ADTRG2#; 5-V tolerant, input pull-up, switchable drive capacity.
36 PA5 bidirectional I/O port PA5 with functions MTIOC1A, MTIOC1A#, TMCI3, RXD6, SMISO6, SSCL6, MISOA, IRQ1, ADTRG1#; 5-V tolerant, input pull-up, switchable drive capacity.
37 PA4 bidirectional I/O port PA4 with functions MTIOC1B, MTIOC1B#, TMCI7, SCK6, RSPCKA, ADTRG0#; 5-V tolerant, input pull-up, switchable drive capacity.
38 PA3 bidirectional I/O port PA3 with functions MTIOC2A, MTIOC2A#, TMRI7, GTADSM0, SSLA0; 5-V tolerant, input pull-up, switchable drive capacity.
39 PA2 bidirectional I/O port PA2 with functions MTIOC2B, MTIOC2B#, TMO7, GTADSM1, CTS6#, RTS6#, SS6#, SSLA1; 5-V tolerant, input pull-up, switchable drive capacity.
40 PA1 bidirectional I/O port PA1 with functions MTIOC6A, MTIOC6A#, TMO4, SSLA2, CRXD0, ADTRG0#; 5-V tolerant, input pull-up, switchable drive capacity.
41 PA0 bidirectional I/O port PA0 with functions MTIOC6C, MTIOC6C#, TMO2, SSLA3, CTXD0; 5-V tolerant, input pull-up, switchable drive capacity.
42 VCC power_in Power supply pin, connected to the system power supply (2.7 V to 5.5 V).
43 P96 bidirectional I/O port P96 with functions POE4#, IRQ4; 5-V tolerant, input pull-up, switchable drive capacity.
44 VSS power_in Ground pin, connected to the system power supply at 0 V.
45 P95 bidirectional I/O port P95 with functions MTIOC6B, MTIOC6B#; 5-V tolerant, input pull-up, switchable drive capacity.
46 P94 bidirectional I/O port P94 with functions MTIOC7A, MTIOC7A#; 5-V tolerant, input pull-up, switchable drive capacity.
47 P93 bidirectional I/O port P93 with functions MTIOC7B, MTIOC7B#; 5-V tolerant, input pull-up, switchable drive capacity.
48 P92 bidirectional I/O port P92 with functions MTIOC6D, MTIOC6D#; 5-V tolerant, input pull-up, switchable drive capacity.
49 P91 bidirectional I/O port P91 with functions MTIOC7C, MTIOC7C#; 5-V tolerant, input pull-up, switchable drive capacity.
50 P90 bidirectional I/O port P90 with functions MTIOC7D, MTIOC7D#; 5-V tolerant, input pull-up, switchable drive capacity.
51 P76 bidirectional I/O port P76 with functions MTIOC4D, MTIOC4D#, GTIOC2B, GTIOC2B#; 5-V tolerant, input pull-up, switchable drive capacity.
52 P75 bidirectional I/O port P75 with functions MTIOC4C, MTIOC4C#, GTIOC1B, GTIOC1B#; 5-V tolerant, input pull-up, switchable drive capacity.
53 P74 bidirectional I/O port P74 with functions MTIOC3D, MTIOC3D#, GTIOC0B, GTIOC0B#; 5-V tolerant, input pull-up, switchable drive capacity.
54 P73 bidirectional I/O port P73 with functions MTIOC4B, MTIOC4B#, GTIOC2A, GTIOC2A#; 5-V tolerant, input pull-up, switchable drive capacity.
55 P72 bidirectional I/O port P72 with functions MTIOC4A, MTIOC4A#, GTIOC1A, GTIOC1A#; 5-V tolerant, input pull-up, switchable drive capacity.
56 P71 bidirectional I/O port P71 with functions MTIOC3B, MTIOC3B#, GTIOC0A, GTIOC0A#; 5-V tolerant, input pull-up, switchable drive capacity.
57 P70 bidirectional I/O port P70 with functions POE0#, IRQ5; 5-V tolerant, input pull-up, switchable drive capacity.
58 P33 bidirectional I/O port P33 with functions MTIOC3A, MTIOC3A#, MTCLKA, MTCLKA#, TMO0, SSLA3; 5-V tolerant, input pull-up, switchable drive capacity.
59 P32 bidirectional I/O port P32 with functions MTIOC3C, MTIOC3C#, MTCLKB, MTCLKB#, TMO6, SSLA2; 5-V tolerant, input pull-up, switchable drive capacity.
60 VCC power_in Power supply pin, connected to the system power supply (2.7 V to 5.5 V).
61 P31 bidirectional I/O port P31 with functions MTIOC0A, MTIOC0A#, MTCLKC, MTCLKC#, TMRI6, SSLA1, IRQ6; 5-V tolerant, input pull-up, switchable drive capacity.
62 VSS power_in Ground pin, connected to the system power supply at 0 V.
63 P30 bidirectional I/O port P30 with functions MTIOC0B, MTIOC0B#, MTCLKD, MTCLKD#, TMCI6, SSLA0, IRQ7, COMP3; 5-V tolerant, input pull-up, switchable drive capacity.
64 P24 bidirectional I/O port P24 with functions MTIC5U, MTIC5U#, TMCI2, TMO6, RSPCKA, COMP0, DA0; 5-V tolerant, input pull-up, switchable drive capacity.
65 P23 bidirectional I/O port P23 with functions MTIC5V, MTIC5V#, TMO2, CACREF, MOSIA, COMP1, DA1; 5-V tolerant, input pull-up, switchable drive capacity.
66 P22 bidirectional I/O port P22 with functions MTIC5W, MTIC5W#, TMRI2, TMO4, MISOA, ADTRG2#, COMP2; 5-V tolerant, input pull-up, switchable drive capacity.
67 P21 bidirectional I/O port P21 with functions MTCLKA, MTCLKA#, MTIOC9A, MTIOC9A#, TMCI4, IRQ6, ADTRG1#, AN116; 5-V tolerant, input pull-up, switchable drive capacity.
68 P20 bidirectional I/O port P20 with functions MTCLKB, MTCLKB#, MTIOC9C, MTIOC9C#, TMRI4, IRQ7, ADTRG0#, AN016; 5-V tolerant, input pull-up, switchable drive capacity.
69 P65 bidirectional I/O port P65 with analog input AN205; 5-V tolerant, input pull-up, switchable drive capacity.
70 P64 bidirectional I/O port P64 with analog input AN204; 5-V tolerant, input pull-up, switchable drive capacity.
71 AVCC2 power_in Analog power and reference power supply pin for 12-bit A/D converter unit 2; connect to AVCC0, AVCC1 or VREF when unit 2 is not used.
72 VREF power_in Analog power supply pin for comparator C and 8-bit D/A converter; connect to AVCC0, AVCC1 or AVCC2 when they are not used.
73 AVSS2 power_in Analog and reference ground pin for 12-bit A/D converter unit 2, comparator C and 8-bit D/A converter.
74 P63 bidirectional I/O port P63 with functions AN203, IRQ7; 5-V tolerant, input pull-up, switchable drive capacity.
75 P62 bidirectional I/O port P62 with functions AN202, IRQ6; 5-V tolerant, input pull-up, switchable drive capacity.
76 P61 bidirectional I/O port P61 with functions AN201, IRQ5; 5-V tolerant, input pull-up, switchable drive capacity.
77 P60 bidirectional I/O port P60 with functions AN200, IRQ4; 5-V tolerant, input pull-up, switchable drive capacity.
78 P55 bidirectional I/O port P55 with functions AN211, IRQ3; 5-V tolerant, input pull-up, switchable drive capacity.
79 P54 bidirectional I/O port P54 with functions AN210, IRQ2; 5-V tolerant, input pull-up, switchable drive capacity.
80 P53 bidirectional I/O port P53 with functions AN209, IRQ1; 5-V tolerant, input pull-up, switchable drive capacity.
81 P52 bidirectional I/O port P52 with functions AN208, IRQ0; 5-V tolerant, input pull-up, switchable drive capacity.
82 P51 bidirectional I/O port P51 with analog input AN207; 5-V tolerant, input pull-up, switchable drive capacity.
83 P50 bidirectional I/O port P50 with analog input AN206; 5-V tolerant, input pull-up, switchable drive capacity.
84 P47 bidirectional I/O port P47 with analog input AN103; 5-V tolerant, input pull-up, switchable drive capacity.
85 P46 bidirectional I/O port P46 with functions AN102, CMPC12, CMPC13, CMPC30, CMPC31; 5-V tolerant, input pull-up, switchable drive capacity.
86 P45 bidirectional I/O port P45 with functions AN101, CMPC02, CMPC03, CMPC20, CMPC21; 5-V tolerant, input pull-up, switchable drive capacity.
87 P44 bidirectional I/O port P44 with functions AN100, CMPC10, CMPC11, CMPC32, CMPC33; 5-V tolerant, input pull-up, switchable drive capacity.
88 P43 bidirectional I/O port P43 with analog input AN003; 5-V tolerant, input pull-up, switchable drive capacity.
89 P42 bidirectional I/O port P42 with analog input AN002; 5-V tolerant, input pull-up, switchable drive capacity.
90 P41 bidirectional I/O port P41 with analog input AN001; 5-V tolerant, input pull-up, switchable drive capacity.
91 P40 bidirectional I/O port P40 with functions AN000, CMPC00, CMPC01, CMPC22, CMPC23; 5-V tolerant, input pull-up, switchable drive capacity.
92 AVCC1 power_in Analog power and reference power supply pin for 12-bit A/D converter unit 1; connect to AVCC0, AVCC2 or VREF when unit 1 is not used.
93 AVCC0 power_in Analog power and reference power supply pin for 12-bit A/D converter unit 0; connect to AVCC1, AVCC2 or VREF when unit 0 is not used.
94 AVSS0 power_in Analog and reference ground pin for 12-bit A/D converter unit 0; connect to AVSS1 or AVSS2 when unit 0 is not used.
95 AVSS1 power_in Analog and reference ground pin for 12-bit A/D converter unit 1; connect to AVSS0 or AVSS2 when unit 1 is not used.
96 P82 bidirectional I/O port P82 with functions MTIC5U, MTIC5U#, TMO4, SCK6; 5-V tolerant, input pull-up, switchable drive capacity.
97 P81 bidirectional I/O port P81 with functions MTIC5V, MTIC5V#, TMCI4, TXD6, SMOSI6, SSDA6; 5-V tolerant, input pull-up, switchable drive capacity.
98 P80 bidirectional I/O port P80 with functions MTIC5W, MTIC5W#, TMRI4, RXD6, SMISO6, SSCL6; 5-V tolerant, input pull-up, switchable drive capacity.
99 P11 bidirectional I/O port P11 with functions MTIOC3A, MTIOC3A#, MTCLKC, MTCLKC#, TMO3, IRQ1; 5-V tolerant, input pull-up, switchable drive capacity.
100 P10 bidirectional I/O port P10 with functions MTIOC9B, MTIOC9B#, MTCLKD, MTCLKD#, TMRI3, POE12#, CTS6#, RTS6#, SS6#, IRQ0; 5-V tolerant, input pull-up, switchable drive capacity.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC 2.7 5.5 V 71
Power supply voltage VCC -0.3 6.5 V VSS = AVSS0 = AVSS1 = AVSS2 = 0 V 71
Analog power supply voltage AVCC0, AVCC1, AVCC2, VREF -0.3 6.5 V VSS = AVSS0 = AVSS1 = AVSS2 = 0 V 71
Operating temperature Topr -40 85 °C 71
Storage temperature Tstg -55 125 °C 71
Input capacitance Cin 4 15 pF All input pins; Vin = 0 mV, f = 1 MHz, Ta = 25°C 73
Input pull-up resistor RU 10 20 50 kΩ All ports (except for port E2); Vin = 0 V 73
Input leakage current /Iin/ 1 μA RES#, MD, port E2; Vin = 0 V, VCC 73
Permissible total consumption power Pd 570 mW 78
Power-on VCC rising gradient at normal startup SrVCC 0.02 20 ms/V At normal startup 78
Permissible error of VCL pin external capacitance CVCL 3.3 4.7 6.1 μF 79
Permissible output low current (ports 71 to 76, port 81, ports 90 to 95, port B5, port D3) IOL 10 mA 80
Permissible output low current (other ports, normal output mode) IOL 4 mA Normal output mode 80
Permissible output low current (other ports, high-drive output mode) IOL 8 mA High-drive output mode 80
Permissible output low current (total of all output pins) ΣIOL 110 mA 80
Permissible output high current (ports 71 to 76, port 81, ports 90 to 95, port B5, port D3) IOH -5 mA 80
Permissible output high current (other ports, normal output mode) IOH -4 mA Normal output mode 80
Permissible output high current (other ports, high-drive output mode) IOH -8 mA High-drive output mode 80
Permissible output high current (total of all output pins) ΣIOH -35 mA 80
Output low voltage (ports 71 to 76, port 81, ports 90 to 95, port B5, port D3) VOL 0.8 V IOL = 10.0mA 80
Output low voltage (RIIC pins, standard mode) VOL 0.4 V IOL = 3.0mA 80
Output low voltage (RIIC pins, fast mode) VOL 0.6 V IOL = 6.0mA 80
Operating frequency, system clock (ICLK) fmax 80 MHz High-speed operating mode; VCC = 2.7 V to 5.5 V, Ta = -40 to +85°C 89
Main clock oscillator oscillation frequency fMAIN 1 20 MHz 90
PLL circuit oscillation frequency fPLL 40 80 MHz 90
LOCO clock oscillation frequency fLOCO 3.44 4 4.56 MHz 90
HOCO clock oscillation frequency (32MHz) fHOCO (32MHz) 31.68 32 32.32 MHz Ta = -20 to +75°C 90
IWDT-dedicated clock oscillation frequency fILOCO 12.75 15 17.25 kHz 90

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Packaging/external pin surface treatment (lead-free) #3: Tray/Sn (Tin) only 8

CAD (KiCad official)

  • Symbol: R5F524TBADFP#31
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: r5f524tbadfp-31-etched.step / r5f524tbadfp-31-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f524tbadfp-31.step / r5f524tbadfp-31.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (133 pp, sha256 04a171d1ceefd2bc, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF