Generated by kicad-footprint-generator · KiCad file format 20260206
R5F524T8ADFM#51
RENESAS · RENESAS · LQFP-64(10x10)
R5F524T8ADFM#51 from RENESAS, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P02 | bidirectional | General I/O port P02 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC9D, CTS1#, RTS1#, SS1#, IRQ5, ADST0. |
| 2 | P00 | bidirectional | General I/O port P00 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions IRQ2, ADST1. |
| 3 | VCL | power_out | Internal voltage-down circuit output; connect a 4.7 μF multilayer ceramic capacitor between VCL and VSS placed close to the pin, and do not apply the power supply voltage to this pin. |
| 4 | MD | input | Operating mode setting pin; the signal level on this pin must not be changed during operation (FINED is the alternate FINE interface function). |
| 5 | P01 | bidirectional | General I/O port P01 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE12#, IRQ4, ADST2. |
| 6 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 7 | XTAL/P37 | output | Output pin for connecting a crystal to the main clock oscillator; also usable as general I/O port P37. |
| 8 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 9 | EXTAL/P36 | input | Input pin for an external clock or crystal connection (EXTAL); also usable as general I/O port P36. |
| 10 | VCC | power_in | Power supply pin; connect to the system power supply, operating range 2.7 V to 5.5 V. |
| 11 | PE2 | input | Input-only port pin PE2 (Table 1.4 lists PE2 as input); alternate functions POE10# and NMI, where NMI is the non-maskable interrupt request input. |
| 12 | PD7 | bidirectional | General I/O port PD7 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC9A, TMRI1, TMRI5, SSLA1. |
| 13 | PD6 | bidirectional | General I/O port PD6 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC9C, TMO1, CTS1#, RTS1#, SS1#. |
| 14 | PD5 | bidirectional | General I/O port PD5 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TMRI0, TMRI6, RXD1, SMISO1, SSCL1. |
| 15 | PD4 | bidirectional | General I/O port PD4 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TMCI0, TMCI6, SCK1, IRQ2. |
| 16 | PD3 | bidirectional | General I/O port PD3 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TMO0, TXD1, SMOSI1, SSDA1. |
| 17 | PB6 | bidirectional | General I/O port PB6 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions RXD5, SMISO5, SSCL5, IRQ5. |
| 18 | PB5 | bidirectional | General I/O port PB5 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TXD5, SMOSI5, SSDA5. |
| 19 | PB4 | bidirectional | General I/O port PB4 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE8#, CTS5#, RTS5#, SS5#, IRQ3. |
| 20 | PB3 | bidirectional | General I/O port PB3 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0A, CACREF, SCK6, RSPCKA. |
| 21 | PB2 | bidirectional | General I/O port PB2 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0B, TMRI0, ADSM0, TXD6, SMOSI6, SSDA6, SDA0. |
| 22 | PB1 | bidirectional | General I/O port PB1 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0C, TMCI0, ADSM1, RXD6, SMISO6, SSCL6, SCL0. |
| 23 | VCC | power_in | Power supply pin; connect to the system power supply, operating range 2.7 V to 5.5 V. |
| 24 | P96 | bidirectional | General I/O port P96 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE4#, IRQ4. |
| 25 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 26 | P95 | bidirectional | General I/O port P95 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC6B. |
| 27 | P94 | bidirectional | General I/O port P94 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7A. |
| 28 | P93 | bidirectional | General I/O port P93 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7B. |
| 29 | P92 | bidirectional | General I/O port P92 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC6D. |
| 30 | P91 | bidirectional | General I/O port P91 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7C. |
| 31 | P90 | bidirectional | General I/O port P90 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7D. |
| 32 | P76 | bidirectional | General I/O port P76 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4D. |
| 33 | P75 | bidirectional | General I/O port P75 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4C. |
| 34 | P74 | bidirectional | General I/O port P74 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC3D. |
| 35 | P73 | bidirectional | General I/O port P73 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4B. |
| 36 | P72 | bidirectional | General I/O port P72 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4A. |
| 37 | P71 | bidirectional | General I/O port P71 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC3B. |
| 38 | P70 | bidirectional | General I/O port P70 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE0#, IRQ5. |
| 39 | VCC | power_in | Power supply pin; connect to the system power supply, operating range 2.7 V to 5.5 V. |
| 40 | P31 | bidirectional | General I/O port P31 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0A, MTCLKC, TMRI6, SSLA1, IRQ6. |
| 41 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 42 | P30 | bidirectional | General I/O port P30 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0B, MTCLKD, TMCI6, SSLA0, IRQ7, COMP3. |
| 43 | P24 | bidirectional | General I/O port P24 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIC5U, TMCI2, TMO6, RSPCKA, COMP0. |
| 44 | P23 | bidirectional | General I/O port P23 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIC5V, TMO2, CACREF, MOSIA, COMP1. |
| 45 | P22 | bidirectional | General I/O port P22 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIC5W, TMRI2, TMO4, MISOA, ADTRG2#, COMP2. |
| 46 | P21 | bidirectional | General I/O port P21 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTCLKA, MTIOC9A, TMCI4, IRQ6, ADTRG1#, AN116, CVREFC1. |
| 47 | AVCC2/VREF | power_in | Analog power supply for 12-bit A/D converter unit 2 and analog reference supply for comparator C and 8-bit D/A; on the 64-pin LFQFP, VREF is internally connected to AVCC2 and shared, and it should be connected to AVCC0, AVCC1 or AVCC2 when unused, with a range of VCC to 5.5 V. |
| 48 | AVSS2 | power_in | Analog ground and reference ground for 12-bit A/D converter unit 2, comparator C and 8-bit D/A converter; connect to AVSS0 or AVSS1 when these modules are not used. |
| 49 | P54 | bidirectional | General I/O port P54 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN210, IRQ2. |
| 50 | P53 | bidirectional | General I/O port P53 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN209, IRQ1. |
| 51 | P52 | bidirectional | General I/O port P52 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN208, IRQ0. |
| 52 | P51 | bidirectional | General I/O port P51 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN207. |
| 53 | P50 | bidirectional | General I/O port P50 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN206. |
| 54 | P46 | bidirectional | General I/O port P46 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN102, CMPC12, CMPC13, CMPC30, CMPC31. |
| 55 | P45 | bidirectional | General I/O port P45 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN101, CMPC02, CMPC03, CMPC20, CMPC21. |
| 56 | P44 | bidirectional | General I/O port P44 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN100, CMPC10, CMPC11, CMPC32, CMPC33. |
| 57 | P42 | bidirectional | General I/O port P42 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN002. |
| 58 | P41 | bidirectional | General I/O port P41 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN001. |
| 59 | P40 | bidirectional | General I/O port P40 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN000, CMPC00, CMPC01, CMPC22, CMPC23. |
| 60 | AVCC1 | power_in | Analog power and reference supply for 12-bit A/D converter unit 1; connect to AVCC0, AVCC2 or VREF when unit 1 is not used, with a range of VCC to 5.5 V. |
| 61 | AVCC0 | power_in | Analog power and reference supply for 12-bit A/D converter unit 0; connect to AVCC1, AVCC2 or VREF when unit 0 is not used, with a range of VCC to 5.5 V. |
| 62 | AVSS0 | power_in | Analog ground and reference ground for 12-bit A/D converter unit 0; connect to AVSS1 or AVSS2 when unit 0 is not used. |
| 63 | AVSS1 | power_in | Analog ground and reference ground for 12-bit A/D converter unit 1; connect to AVSS0 or AVSS2 when unit 1 is not used. |
| 64 | P11 | bidirectional | General I/O port P11 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC3A, MTCLKC, TMO3, IRQ1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 6.5 | V | 71 | ||
| Input voltage, ports 4/5/6 (upper limit printed as VREF + 0.3) | Vin | -0.3 | V | 71 | |||
| Input voltage, ports except 4/5/6 and 5 V tolerant ports (upper limit printed as VCC + 0.3) | Vin | -0.3 | V | 71 | |||
| Input voltage, 5 V tolerant ports | Vin | -0.3 | 6.5 | V | 71 | ||
| Analog power supply voltage | AVCC0, AVCC1, AVCC2, VREF | -0.3 | 6.5 | V | 71 | ||
| Analog input voltage, AN000-003, AN100-103, AN200-211 (upper limit printed as VREF + 0.3) | VAN | -0.3 | V | 71 | |||
| Analog input voltage, AN016, AN116, CVREFC0, CVREFC1 (upper limit printed as VCC + 0.3) | VAN | -0.3 | V | 71 | |||
| Operating temperature | Topr | -40 | 85 | °C | 71 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 71 | ||
| Power supply voltage (recommended operating) | VCC | 2.7 | 5.5 | V | 71 | ||
| Analog power supply voltage (recommended operating, upper limit) | AVCC0, AVCC1, AVCC2, VREF | 5.5 | V | 71 | |||
| Input pull-up resistor, all ports except E2 | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 73 |
| Schmitt/input high voltage, RIIC input pin (SMBus) (upper limit printed as VCC + 0.3) | VIH | 2.1 | V | VCC ≤ 5.2 V | 72 | ||
| Input low voltage, RIIC input pin (SMBus) | VIL | -0.3 | 0.8 | V | VCC ≤ 5.2 V | 72 | |
| Input leakage current, RES#, MD, port E2 | /Iin/ | 1 | μA | Vin = 0 V, VCC | 73 | ||
| Three-state leakage current (off-state), port 4, port 5, port 6 | /ITSI/ | 1 | μA | Vin = 0 V, VREF | 73 | ||
| Three-state leakage current (off-state), ports except 5 V tolerant ports and port 4/5/6 | 0.2 | Vin = 0 V, VCC | 73 | ||||
| Three-state leakage current (off-state), 5 V tolerant ports | 1 | Vin = 0 V, 5.8 V | 73 | ||||
| Input capacitance, all input pins | Cin | 4 | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 73 | |
| Permissible total consumption power | Pd | 570 | mW | 78 | |||
| Analog power supply current, A/D unit 0, during A/D conversion (programmable gain amplifier in use) | IAVCC | 1.5 | 2.5 | mA | During A/D conversion (programmable gain amplifier in use) | 78 | |
| Analog power supply current, A/D unit 0, during A/D conversion (programmable gain amplifier not in use) | 1 | 1.8 | mA | During A/D conversion (programmable gain amplifier not in use) | 78 | ||
| Analog power supply current, A/D unit 1, S/H circuits in use, PGA in use | 4.6 | 6.9 | mA | During A/D conversion (sample-and-hold circuits in use, programmable gain amplifier in use) | 78 | ||
| Analog power supply current, A/D unit 1, S/H circuits in use, PGA not in use | 3.1 | 4.8 | mA | During A/D conversion (sample-and-hold circuits in use, programmable gain amplifier not in use) | 78 | ||
| Analog power supply current, A/D unit 1, S/H circuits not in use, PGA in use | 2.5 | 3.9 | mA | During A/D conversion (sample-and-hold circuits not in use, programmable gain amplifier in use) | 78 | ||
| Analog power supply current, A/D unit 1, S/H circuits not in use, PGA not in use | 1 | 1.8 | mA | During A/D conversion (sample-and-hold circuits not in use, programmable gain amplifier not in use) | 78 | ||
| Analog power supply current, A/D unit 2 | 1 | 1.8 | mA | 78 | |||
| Analog power supply current, D/A conversion (per channel) | 0.7 | 1 | mA | During D/A conversion (per channel) | 78 | ||
| Analog power supply current, waiting for A/D or D/A conversion (all units) | 2.2 | μA | Waiting for A/D or D/A conversion (all units) | 78 | |||
| Analog power supply current, waiting for A/D conversion (all units) | 1.2 | μA | Waiting for A/D conversion (all units) | 78 | |||
| Comparator C operating current | ICMP | 40 | 60 | μA | Comparator enabled | 78 | |
| Power-on VCC rising gradient, at normal startup | SrVCC | 0.02 | 20 | ms/V | At normal startup | 78 | |
| Allowable ripple frequency | fr (VCC) | 10 | kHz | Figure 5.5, Vr (VCC) ≤ VCC × 0.2 | 79 | ||
| Allowable ripple frequency | 1 | MHz | Figure 5.5, Vr (VCC) ≤ VCC × 0.08 | 79 | |||
| Allowable ripple frequency | 10 | MHz | Figure 5.5, Vr (VCC) ≤ VCC × 0.06 | 79 | |||
| Allowable voltage change rising/falling gradient | dt/dVCC | 1 | ms/V | When VCC change exceeds VCC ±10% | 79 | ||
| Permissible error of VCL pin external capacitance | CVCL | 3.3 | 4.7 | 6.1 | μF | 79 | |
| Permissible output low current, ports 71-76, 81, 90-95, B5, D3 | IOL | 10 | mA | 80 | |||
| Permissible output low current, RIIC pins | 6 | mA | 80 | ||||
| Permissible output low current, other ports, normal output mode | 4 | mA | 80 | ||||
| Permissible output low current, other ports, high-drive output mode | 8 | mA | 80 | ||||
| Permissible output low current, total of all output pins | ΣIOL | 110 | mA | 80 | |||
| Permissible output high current, ports 71-76, 81, 90-95, B5, D3 | IOH | -5 | mA | 80 | |||
| Permissible output high current, other ports, normal output mode | -4 | mA | 80 | ||||
| Permissible output high current, other ports, high-drive output mode | -8 | mA | 80 | ||||
| Permissible output high current, total of all output pins | ΣIOH | -35 | mA | 80 | |||
| Output low voltage, ports 71-76, 81, 90-95, B5, D3 | VOL | 0.8 | V | IOL = 10.0mA | 80 | ||
| Output low voltage, RIIC pins, standard mode | 0.4 | V | IOL = 3.0mA | 80 | |||
| Output low voltage, RIIC pins, fast mode | 0.6 | V | IOL = 6.0mA | 80 | |||
| Output low voltage, other ports, normal output mode | 0.8 | V | IOL = 1.0mA | 80 | |||
| Output low voltage, other ports, high-drive output mode | 0.8 | V | IOL = 2.0mA | 80 | |||
| Operating frequency, system clock (ICLK), high-speed operating mode | fmax | 80 | MHz | 89 | |||
| Operating frequency, FlashIF clock (FCLK), high-speed operating mode | 32 | MHz | 89 | ||||
| EXTAL external clock input cycle time | tXcyc | 50 | ns | Figure 5.22 | 90 | ||
| Main clock oscillator oscillation frequency | fMAIN | 1 | 20 | MHz | 90 | ||
| LOCO clock oscillation frequency | fLOCO | 3.44 | 4 | 4.56 | MHz | 90 | |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | 90 | |
| PLL circuit oscillation frequency | fPLL | 40 | 80 | MHz | 90 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Packaging/external pin surface treatment (lead-free) #3: Tray/Sn (Tin) only | 8 |
CAD (KiCad official)
- Symbol:
R5F524T8ADFM#51 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
r5f524t8adfm-51-etched.step/r5f524t8adfm-51-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f524t8adfm-51.step/r5f524t8adfm-51.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (133 pp, sha256
58757432211d2de6, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).