Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R5F524T8ADFM#51

RENESAS · RENESAS · LQFP-64(10x10)

R5F524T8ADFM#51 from RENESAS, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P02 bidirectional General I/O port P02 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC9D, CTS1#, RTS1#, SS1#, IRQ5, ADST0.
2 P00 bidirectional General I/O port P00 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions IRQ2, ADST1.
3 VCL power_out Internal voltage-down circuit output; connect a 4.7 μF multilayer ceramic capacitor between VCL and VSS placed close to the pin, and do not apply the power supply voltage to this pin.
4 MD input Operating mode setting pin; the signal level on this pin must not be changed during operation (FINED is the alternate FINE interface function).
5 P01 bidirectional General I/O port P01 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE12#, IRQ4, ADST2.
6 RES# input Reset pin; the MCU enters the reset state when this signal goes low.
7 XTAL/P37 output Output pin for connecting a crystal to the main clock oscillator; also usable as general I/O port P37.
8 VSS power_in Ground pin; connect to the system power supply (0 V).
9 EXTAL/P36 input Input pin for an external clock or crystal connection (EXTAL); also usable as general I/O port P36.
10 VCC power_in Power supply pin; connect to the system power supply, operating range 2.7 V to 5.5 V.
11 PE2 input Input-only port pin PE2 (Table 1.4 lists PE2 as input); alternate functions POE10# and NMI, where NMI is the non-maskable interrupt request input.
12 PD7 bidirectional General I/O port PD7 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC9A, TMRI1, TMRI5, SSLA1.
13 PD6 bidirectional General I/O port PD6 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC9C, TMO1, CTS1#, RTS1#, SS1#.
14 PD5 bidirectional General I/O port PD5 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TMRI0, TMRI6, RXD1, SMISO1, SSCL1.
15 PD4 bidirectional General I/O port PD4 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TMCI0, TMCI6, SCK1, IRQ2.
16 PD3 bidirectional General I/O port PD3 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TMO0, TXD1, SMOSI1, SSDA1.
17 PB6 bidirectional General I/O port PB6 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions RXD5, SMISO5, SSCL5, IRQ5.
18 PB5 bidirectional General I/O port PB5 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions TXD5, SMOSI5, SSDA5.
19 PB4 bidirectional General I/O port PB4 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE8#, CTS5#, RTS5#, SS5#, IRQ3.
20 PB3 bidirectional General I/O port PB3 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0A, CACREF, SCK6, RSPCKA.
21 PB2 bidirectional General I/O port PB2 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0B, TMRI0, ADSM0, TXD6, SMOSI6, SSDA6, SDA0.
22 PB1 bidirectional General I/O port PB1 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0C, TMCI0, ADSM1, RXD6, SMISO6, SSCL6, SCL0.
23 VCC power_in Power supply pin; connect to the system power supply, operating range 2.7 V to 5.5 V.
24 P96 bidirectional General I/O port P96 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE4#, IRQ4.
25 VSS power_in Ground pin; connect to the system power supply (0 V).
26 P95 bidirectional General I/O port P95 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC6B.
27 P94 bidirectional General I/O port P94 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7A.
28 P93 bidirectional General I/O port P93 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7B.
29 P92 bidirectional General I/O port P92 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC6D.
30 P91 bidirectional General I/O port P91 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7C.
31 P90 bidirectional General I/O port P90 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC7D.
32 P76 bidirectional General I/O port P76 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4D.
33 P75 bidirectional General I/O port P75 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4C.
34 P74 bidirectional General I/O port P74 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC3D.
35 P73 bidirectional General I/O port P73 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4B.
36 P72 bidirectional General I/O port P72 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC4A.
37 P71 bidirectional General I/O port P71 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function MTIOC3B.
38 P70 bidirectional General I/O port P70 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions POE0#, IRQ5.
39 VCC power_in Power supply pin; connect to the system power supply, operating range 2.7 V to 5.5 V.
40 P31 bidirectional General I/O port P31 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0A, MTCLKC, TMRI6, SSLA1, IRQ6.
41 VSS power_in Ground pin; connect to the system power supply (0 V).
42 P30 bidirectional General I/O port P30 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC0B, MTCLKD, TMCI6, SSLA0, IRQ7, COMP3.
43 P24 bidirectional General I/O port P24 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIC5U, TMCI2, TMO6, RSPCKA, COMP0.
44 P23 bidirectional General I/O port P23 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIC5V, TMO2, CACREF, MOSIA, COMP1.
45 P22 bidirectional General I/O port P22 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIC5W, TMRI2, TMO4, MISOA, ADTRG2#, COMP2.
46 P21 bidirectional General I/O port P21 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTCLKA, MTIOC9A, TMCI4, IRQ6, ADTRG1#, AN116, CVREFC1.
47 AVCC2/VREF power_in Analog power supply for 12-bit A/D converter unit 2 and analog reference supply for comparator C and 8-bit D/A; on the 64-pin LFQFP, VREF is internally connected to AVCC2 and shared, and it should be connected to AVCC0, AVCC1 or AVCC2 when unused, with a range of VCC to 5.5 V.
48 AVSS2 power_in Analog ground and reference ground for 12-bit A/D converter unit 2, comparator C and 8-bit D/A converter; connect to AVSS0 or AVSS1 when these modules are not used.
49 P54 bidirectional General I/O port P54 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN210, IRQ2.
50 P53 bidirectional General I/O port P53 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN209, IRQ1.
51 P52 bidirectional General I/O port P52 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN208, IRQ0.
52 P51 bidirectional General I/O port P51 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN207.
53 P50 bidirectional General I/O port P50 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN206.
54 P46 bidirectional General I/O port P46 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN102, CMPC12, CMPC13, CMPC30, CMPC31.
55 P45 bidirectional General I/O port P45 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN101, CMPC02, CMPC03, CMPC20, CMPC21.
56 P44 bidirectional General I/O port P44 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN100, CMPC10, CMPC11, CMPC32, CMPC33.
57 P42 bidirectional General I/O port P42 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN002.
58 P41 bidirectional General I/O port P41 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate function AN001.
59 P40 bidirectional General I/O port P40 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions AN000, CMPC00, CMPC01, CMPC22, CMPC23.
60 AVCC1 power_in Analog power and reference supply for 12-bit A/D converter unit 1; connect to AVCC0, AVCC2 or VREF when unit 1 is not used, with a range of VCC to 5.5 V.
61 AVCC0 power_in Analog power and reference supply for 12-bit A/D converter unit 0; connect to AVCC1, AVCC2 or VREF when unit 0 is not used, with a range of VCC to 5.5 V.
62 AVSS0 power_in Analog ground and reference ground for 12-bit A/D converter unit 0; connect to AVSS1 or AVSS2 when unit 0 is not used.
63 AVSS1 power_in Analog ground and reference ground for 12-bit A/D converter unit 1; connect to AVSS0 or AVSS2 when unit 1 is not used.
64 P11 bidirectional General I/O port P11 (5-V tolerant, open-drain capable, input pull-up, switchable drive capacity); alternate functions MTIOC3A, MTCLKC, TMO3, IRQ1.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC -0.3 6.5 V 71
Input voltage, ports 4/5/6 (upper limit printed as VREF + 0.3) Vin -0.3 V 71
Input voltage, ports except 4/5/6 and 5 V tolerant ports (upper limit printed as VCC + 0.3) Vin -0.3 V 71
Input voltage, 5 V tolerant ports Vin -0.3 6.5 V 71
Analog power supply voltage AVCC0, AVCC1, AVCC2, VREF -0.3 6.5 V 71
Analog input voltage, AN000-003, AN100-103, AN200-211 (upper limit printed as VREF + 0.3) VAN -0.3 V 71
Analog input voltage, AN016, AN116, CVREFC0, CVREFC1 (upper limit printed as VCC + 0.3) VAN -0.3 V 71
Operating temperature Topr -40 85 °C 71
Storage temperature Tstg -55 125 °C 71
Power supply voltage (recommended operating) VCC 2.7 5.5 V 71
Analog power supply voltage (recommended operating, upper limit) AVCC0, AVCC1, AVCC2, VREF 5.5 V 71
Input pull-up resistor, all ports except E2 RU 10 20 50 kΩ Vin = 0 V 73
Schmitt/input high voltage, RIIC input pin (SMBus) (upper limit printed as VCC + 0.3) VIH 2.1 V VCC ≤ 5.2 V 72
Input low voltage, RIIC input pin (SMBus) VIL -0.3 0.8 V VCC ≤ 5.2 V 72
Input leakage current, RES#, MD, port E2 /Iin/ 1 μA Vin = 0 V, VCC 73
Three-state leakage current (off-state), port 4, port 5, port 6 /ITSI/ 1 μA Vin = 0 V, VREF 73
Three-state leakage current (off-state), ports except 5 V tolerant ports and port 4/5/6 0.2 Vin = 0 V, VCC 73
Three-state leakage current (off-state), 5 V tolerant ports 1 Vin = 0 V, 5.8 V 73
Input capacitance, all input pins Cin 4 15 pF Vin = 0 mV, f = 1 MHz, Ta = 25°C 73
Permissible total consumption power Pd 570 mW 78
Analog power supply current, A/D unit 0, during A/D conversion (programmable gain amplifier in use) IAVCC 1.5 2.5 mA During A/D conversion (programmable gain amplifier in use) 78
Analog power supply current, A/D unit 0, during A/D conversion (programmable gain amplifier not in use) 1 1.8 mA During A/D conversion (programmable gain amplifier not in use) 78
Analog power supply current, A/D unit 1, S/H circuits in use, PGA in use 4.6 6.9 mA During A/D conversion (sample-and-hold circuits in use, programmable gain amplifier in use) 78
Analog power supply current, A/D unit 1, S/H circuits in use, PGA not in use 3.1 4.8 mA During A/D conversion (sample-and-hold circuits in use, programmable gain amplifier not in use) 78
Analog power supply current, A/D unit 1, S/H circuits not in use, PGA in use 2.5 3.9 mA During A/D conversion (sample-and-hold circuits not in use, programmable gain amplifier in use) 78
Analog power supply current, A/D unit 1, S/H circuits not in use, PGA not in use 1 1.8 mA During A/D conversion (sample-and-hold circuits not in use, programmable gain amplifier not in use) 78
Analog power supply current, A/D unit 2 1 1.8 mA 78
Analog power supply current, D/A conversion (per channel) 0.7 1 mA During D/A conversion (per channel) 78
Analog power supply current, waiting for A/D or D/A conversion (all units) 2.2 μA Waiting for A/D or D/A conversion (all units) 78
Analog power supply current, waiting for A/D conversion (all units) 1.2 μA Waiting for A/D conversion (all units) 78
Comparator C operating current ICMP 40 60 μA Comparator enabled 78
Power-on VCC rising gradient, at normal startup SrVCC 0.02 20 ms/V At normal startup 78
Allowable ripple frequency fr (VCC) 10 kHz Figure 5.5, Vr (VCC) ≤ VCC × 0.2 79
Allowable ripple frequency 1 MHz Figure 5.5, Vr (VCC) ≤ VCC × 0.08 79
Allowable ripple frequency 10 MHz Figure 5.5, Vr (VCC) ≤ VCC × 0.06 79
Allowable voltage change rising/falling gradient dt/dVCC 1 ms/V When VCC change exceeds VCC ±10% 79
Permissible error of VCL pin external capacitance CVCL 3.3 4.7 6.1 μF 79
Permissible output low current, ports 71-76, 81, 90-95, B5, D3 IOL 10 mA 80
Permissible output low current, RIIC pins 6 mA 80
Permissible output low current, other ports, normal output mode 4 mA 80
Permissible output low current, other ports, high-drive output mode 8 mA 80
Permissible output low current, total of all output pins ΣIOL 110 mA 80
Permissible output high current, ports 71-76, 81, 90-95, B5, D3 IOH -5 mA 80
Permissible output high current, other ports, normal output mode -4 mA 80
Permissible output high current, other ports, high-drive output mode -8 mA 80
Permissible output high current, total of all output pins ΣIOH -35 mA 80
Output low voltage, ports 71-76, 81, 90-95, B5, D3 VOL 0.8 V IOL = 10.0mA 80
Output low voltage, RIIC pins, standard mode 0.4 V IOL = 3.0mA 80
Output low voltage, RIIC pins, fast mode 0.6 V IOL = 6.0mA 80
Output low voltage, other ports, normal output mode 0.8 V IOL = 1.0mA 80
Output low voltage, other ports, high-drive output mode 0.8 V IOL = 2.0mA 80
Operating frequency, system clock (ICLK), high-speed operating mode fmax 80 MHz 89
Operating frequency, FlashIF clock (FCLK), high-speed operating mode 32 MHz 89
EXTAL external clock input cycle time tXcyc 50 ns Figure 5.22 90
Main clock oscillator oscillation frequency fMAIN 1 20 MHz 90
LOCO clock oscillation frequency fLOCO 3.44 4 4.56 MHz 90
IWDT-dedicated clock oscillation frequency fILOCO 12.75 15 17.25 kHz 90
PLL circuit oscillation frequency fPLL 40 80 MHz 90

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Packaging/external pin surface treatment (lead-free) #3: Tray/Sn (Tin) only 8

CAD (KiCad official)

  • Symbol: R5F524T8ADFM#51
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: r5f524t8adfm-51-etched.step / r5f524t8adfm-51-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f524t8adfm-51.step / r5f524t8adfm-51.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (133 pp, sha256 58757432211d2de6, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF