main
Ray Publish 0.1.0 1f6f263

R5F523T5ADFD#10

RENESAS · Pre-ordered MCUs · LQFP-52(10x10)

R5F523T5ADFD#10 from RENESAS, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P02 bidirectional General-purpose I/O port P02 (5-V tolerant, open drain, input pull-up); alternate functions CTS1#/RTS1#/SS1#, ADST0 and IRQ5.
2 VCL passive Connect to VSS through a 4.7 µF smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin.
3 MD input Operating mode setting pin; the signal level on this pin must not be changed during operation. Alternate function FINED (FINE emulator interface).
4 RES# input Reset input; the MCU enters the reset state when this signal goes low.
5 P37/XTAL output Crystal connection output (XTAL) for the main clock oscillator; also shared with general I/O port P37.
6 VSS power_in Ground pin; connect to the system power supply 0 V.
7 P36/EXTAL input External clock input (EXTAL, up to 20 MHz) or crystal connection with the main clock oscillator (1 to 20 MHz); also shared with general I/O port P36.
8 VCC power_in Power supply pin; operating range VCC = 2.7 to 5.5 V.
9 PE2 input 1-bit input-only port pin; alternate functions POE10# (port output enable request input) and NMI (non-maskable interrupt input).
10 PD6 bidirectional General-purpose I/O port PD6 (5-V tolerant, open drain, input pull-up); alternate functions TMO1, SSLA0/CTS1#/RTS1#/SS1#, ADST0 and IRQ5.
11 PD5 bidirectional General-purpose I/O port PD5 (5-V tolerant, open drain, input pull-up); alternate functions TMRI0, RXD1/SMISO1/SSCL1 and IRQ3.
12 PD4 bidirectional General-purpose I/O port PD4 (5-V tolerant, open drain, input pull-up); alternate functions TMCI0, SCK1 and IRQ2.
13 PD3 bidirectional Large-current I/O port PD3 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate functions TMO0 and TXD1/SMOSI1/SSDA1.
14 PB7 bidirectional General-purpose I/O port PB7 (5-V tolerant, open drain, input pull-up); alternate function SCK5.
15 PB6 bidirectional General-purpose I/O port PB6 (5-V tolerant, open drain, input pull-up); alternate functions RXD5/SMISO5/SSCL5 and IRQ5.
16 PB5 bidirectional Large-current I/O port PB5 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function TXD5/SMOSI5/SSDA5.
17 VCC power_in Power supply pin; operating range VCC = 2.7 to 5.5 V.
18 PB4 bidirectional General-purpose I/O port PB4 (5-V tolerant, open drain, input pull-up); alternate functions POE8# and IRQ3.
19 PB3 bidirectional General-purpose I/O port PB3 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0A, CACREF, SCK5 and RSPCKA.
20 PB2 bidirectional General-purpose I/O port PB2 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0B, ADSM0, TXD5/SMOSI5/SSDA5 and SDA0.
21 PB1 bidirectional General-purpose I/O port PB1 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0C, RXD5/SMISO5/SSCL5, SCL0 and IRQ2.
22 PB0 bidirectional General-purpose I/O port PB0 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0D and MOSIA.
23 PA3 bidirectional General-purpose I/O port PA3 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC2A and SSLA0.
24 PA2 bidirectional General-purpose I/O port PA2 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC2B, CTS5#/RTS5#/SS5#/SSLA1 and IRQ4.
25 P94 bidirectional General-purpose I/O port P94 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0C, TMO1, MISOA and IRQ1.
26 P93 bidirectional General-purpose I/O port P93 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0B, TMRI1, SCK5/RSPCKA and IRQ0.
27 P76 bidirectional Large-current I/O port P76 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4D.
28 P75 bidirectional Large-current I/O port P75 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4C.
29 P74 bidirectional Large-current I/O port P74 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC3D.
30 P73 bidirectional Large-current I/O port P73 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4B.
31 P72 bidirectional Large-current I/O port P72 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4A.
32 P71 bidirectional Large-current I/O port P71 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC3B.
33 P70 bidirectional General-purpose I/O port P70 (5-V tolerant, open drain, input pull-up); alternate functions POE0# and IRQ5.
34 P33 bidirectional General-purpose I/O port P33 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC3A/MTCLKA and SSLA3.
35 VCC power_in Power supply pin; operating range VCC = 2.7 to 5.5 V.
36 VSS power_in Ground pin; connect to the system power supply 0 V.
37 P24 bidirectional General-purpose I/O port P24 (5-V tolerant, open drain, input pull-up); alternate functions MTIC5U/TMCI2, RSPCKA, COMP0 and IRQ3.
38 P23 bidirectional General-purpose I/O port P23 (5-V tolerant, open drain, input pull-up); alternate functions MTIC5V/CACREF/TMO2, MOSIA, COMP1 and IRQ4.
39 P22 bidirectional General-purpose I/O port P22 (5-V tolerant, open drain, input pull-up); alternate functions MTIC5W/TMRI2, MISOA, COMP2 and IRQ2.
40 P47 bidirectional General-purpose I/O port P47 (5-V tolerant, open drain, input pull-up); analog input AN007 for the 12-bit A/D converter, also CMPC12 and CMPC22 comparator C inputs.
41 P46 bidirectional General-purpose I/O port P46 (5-V tolerant, open drain, input pull-up); analog input AN006 for the 12-bit A/D converter, also CMPC02 comparator C input.
42 P45 bidirectional General-purpose I/O port P45 (5-V tolerant, open drain, input pull-up); analog input AN005 for the 12-bit A/D converter, also CMPC21 comparator C input.
43 P44 bidirectional General-purpose I/O port P44 (5-V tolerant, open drain, input pull-up); analog input AN004 for the 12-bit A/D converter, also CMPC11 comparator C input.
44 P43 bidirectional General-purpose I/O port P43 (5-V tolerant, open drain, input pull-up); analog input AN003 for the 12-bit A/D converter, also CMPC01 comparator C input.
45 P42 bidirectional General-purpose I/O port P42 (5-V tolerant, open drain, input pull-up); analog input AN002 for the 12-bit A/D converter, also CMPC20 comparator C input.
46 P41 bidirectional General-purpose I/O port P41 (5-V tolerant, open drain, input pull-up); analog input AN001 for the 12-bit A/D converter, also CMPC10 comparator C input.
47 P40 bidirectional General-purpose I/O port P40 (5-V tolerant, open drain, input pull-up); analog input AN000 for the 12-bit A/D converter, also CMPC00 comparator C input.
48 AVCC0 power_in Analog supply for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used.
49 AVSS0 power_in Analog ground for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used.
50 P11 bidirectional General-purpose I/O port P11 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC3A, MTCLKC, TMO3, IRQ1, analog input AN016 and CVREFC0 comparator reference input.
51 P10 bidirectional General-purpose I/O port P10 (5-V tolerant, open drain, input pull-up); alternate functions MTCLKD, TMRI3, IRQ0, analog input AN017 and CVREFC1 comparator reference input.
52 PA5 bidirectional General-purpose I/O port PA5 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC1A, TMCI3 and MISOA.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-52(10x10)
Category Embedded Processors & Controllers
Pins 52

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC -0.3 6.5 V VSS = AVSS0 = VREFL0 = 0 V 41
Input voltage Port 4 (max AVCC0+0.3 V) Vin -0.3 V 41
Input voltage ports for 5 V tolerant Vin -0.3 6.5 V 41
Input voltage except port 4 and 5 V tolerant ports (max VCC+0.3 V) Vin -0.3 V 41
Reference power supply voltage (max AVCC0+0.3 V) VREFH0 -0.3 V 41
Analog power supply voltage AVCC0 -0.3 6.5 V 41
Analog input voltage AN000 to AN007 (max AVCC0+0.3 V) VAN -0.3 V 41
Analog input voltage AN016, AN017 (max VCC+0.3 V) VAN -0.3 V 41
Operating temperature, D version (product dependent) Topr -40 85 °C 41
Operating temperature, G version (product dependent) Topr -40 105 °C 41
Storage temperature Tstg -55 125 °C 41
Power supply voltage VCC 2.7 5.5 V 41
Analog power supply voltage AVCC0 (min printed as VCC) AVCC0 5.5 V 41
Input level voltage RIIC input pin (SMBus) VIH (max VCC+0.3 V) VIH 2.1 V 42
Input level voltage RIIC input pin (SMBus) VIL VIL -0.3 0.8 V 42
Input leakage current RES#, MD, port E2 Iin 1 μA Vin = 0 V, VCC 42
Input pull-up resistor, all ports except E2 RU 10 20 50 kΩ Vin = 0 V 42
Input capacitance, all input pins Cin 4 15 pF Vin = 0 mV, f = 1 MHz, Ta = 25°C 42
Supply current, normal operating mode, all peripheral operation Max. ICC 33 mA High-speed operating mode, ICLK = 40 MHz 43
Supply current, middle-speed normal operating mode, all peripheral operation Max. ICC 11 mA ICLK = 12 MHz 43
Supply current, software standby mode ICC 0.45 0.91 μA Ta = 25°C 44
Supply current, software standby mode ICC 3.42 23.94 μA Ta = 105°C 44
Permissible total consumption power, D-version Pd 300 mW D-version product 46
Permissible total consumption power, G-version Pd 125 mW G-version product 46
Analog power supply current during A/D conversion IAVCC 3.1 5.2 mA Sample-and-hold circuits in use 46
Reference power supply current during A/D conversion IREFH0 80 130 μA During A/D conversion 46
Comparator C operating current ICMP 40 60 μA Comparator enabled (per channel) 46
Power-on VCC rising gradient at normal startup SrVCC 0.02 20 ms/V At normal startup 46
Allowable voltage change rising/falling gradient dt/dVCC 1 ms/V When VCC change exceeds VCC ±10% 47
Permissible error of VCL pin external capacitance CVCL 3.3 4.7 6.1 μF 47
Permissible output low current, large current ports (Ports 71 to 76, port B5, port D3) IOL 10 mA 47
Permissible output low current, ports other than large current, normal output mode IOL 4 mA 47
Permissible output high current, large current ports (Ports 71 to 76, port B5, port D3) IOH -5 mA 47
Output low voltage, large current ports (Ports 71 to 76, port B5, port D3) VOL 0.8 V IOL = 10.0 mA 48
Output low voltage, ports other than large current, normal output mode VOL 0.8 V IOL = 1.0 mA 48
Maximum operating frequency, system clock (ICLK) fmax 40 MHz High-speed operating mode 57
EXTAL external clock input cycle time tXcyc 50 ns Figure 5.20 58
Main clock oscillator oscillation frequency fMAIN 1 20 MHz 58
LOCO clock oscillation frequency fLOCO 3.44 4 4.56 MHz 58
IWDT-dedicated clock oscillation frequency fILOCO 12.75 15 17.25 kHz 58
HOCO clock oscillation frequency fHOCO 31.36 32 32.64 MHz Ta = -40 to +105°C 58
PLL circuit oscillation frequency fPLL 24 40 MHz 58
PLL clock oscillation stabilization time tPLL 50 μs 58
RES# pulse width at power-on tRESWP 3 ms Figure 5.27 61
RES# pulse width other than power-on tRESW 30 μs Figure 5.28 61
Recovery time from software standby mode, high-speed mode, crystal tSBYMC 2 3 ms Crystal connected to main clock oscillator, main clock oscillator operating 62
NMI pulse width tNMIW 200 ns NMI digital filter disabled (NMIFLTE.NFLTEN = 0) 64
IRQ pulse width tIRQW 200 ns IRQ digital filter disabled (IRQFLTE0.FLTENi = 0) 64
A/D converter resolution 12 Bit 76
A/D conversion time, high-precision channel (sample-and-hold not in use) 1.15 μs Operation at PCLKD = 40 MHz; ADSSTRn.SST[7:0] = 0Eh 76
A/D offset error -6.5 6.5 LSB 76
A/D full-scale error -6.5 6.5 LSB 76
A/D absolute accuracy -8 8 LSB 76
A/D DNL differential nonlinearity error -1.5 0.5 1.5 LSB 76
A/D INL integral nonlinearity error -4 2 4 LSB 76
Internal reference voltage input channel 1.36 1.43 1.5 V 76
Comparator offset voltage Vcioff 40 mV 79
D/A absolute accuracy -3 1 3 LSB 80
Power-on reset voltage detection level (POR) VPOR 1.35 1.5 1.65 V 81
Voltage detection circuit (LVD0) level Vdet0_0 Vdet0_0 3.67 3.84 3.97 V 81

CAD (KiCad official)

  • Symbol: R5F523T5ADFD#10
  • Footprint: Package_QFP:LQFP-52_10x10mm_P0.65mm
  • 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
  • 3D model files: r5f523t5adfd-10-etched.step / r5f523t5adfd-10-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f523t5adfd-10.step / r5f523t5adfd-10.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (98 pp, sha256 58681e257aeabc3e, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF