Generated by kicad-footprint-generator · KiCad file format 20260206
R5F523T5ADFD#10
RENESAS · Pre-ordered MCUs · LQFP-52(10x10)
R5F523T5ADFD#10 from RENESAS, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P02 | bidirectional | General-purpose I/O port P02 (5-V tolerant, open drain, input pull-up); alternate functions CTS1#/RTS1#/SS1#, ADST0 and IRQ5. |
| 2 | VCL | passive | Connect to VSS through a 4.7 µF smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin. |
| 3 | MD | input | Operating mode setting pin; the signal level on this pin must not be changed during operation. Alternate function FINED (FINE emulator interface). |
| 4 | RES# | input | Reset input; the MCU enters the reset state when this signal goes low. |
| 5 | P37/XTAL | output | Crystal connection output (XTAL) for the main clock oscillator; also shared with general I/O port P37. |
| 6 | VSS | power_in | Ground pin; connect to the system power supply 0 V. |
| 7 | P36/EXTAL | input | External clock input (EXTAL, up to 20 MHz) or crystal connection with the main clock oscillator (1 to 20 MHz); also shared with general I/O port P36. |
| 8 | VCC | power_in | Power supply pin; operating range VCC = 2.7 to 5.5 V. |
| 9 | PE2 | input | 1-bit input-only port pin; alternate functions POE10# (port output enable request input) and NMI (non-maskable interrupt input). |
| 10 | PD6 | bidirectional | General-purpose I/O port PD6 (5-V tolerant, open drain, input pull-up); alternate functions TMO1, SSLA0/CTS1#/RTS1#/SS1#, ADST0 and IRQ5. |
| 11 | PD5 | bidirectional | General-purpose I/O port PD5 (5-V tolerant, open drain, input pull-up); alternate functions TMRI0, RXD1/SMISO1/SSCL1 and IRQ3. |
| 12 | PD4 | bidirectional | General-purpose I/O port PD4 (5-V tolerant, open drain, input pull-up); alternate functions TMCI0, SCK1 and IRQ2. |
| 13 | PD3 | bidirectional | Large-current I/O port PD3 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate functions TMO0 and TXD1/SMOSI1/SSDA1. |
| 14 | PB7 | bidirectional | General-purpose I/O port PB7 (5-V tolerant, open drain, input pull-up); alternate function SCK5. |
| 15 | PB6 | bidirectional | General-purpose I/O port PB6 (5-V tolerant, open drain, input pull-up); alternate functions RXD5/SMISO5/SSCL5 and IRQ5. |
| 16 | PB5 | bidirectional | Large-current I/O port PB5 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function TXD5/SMOSI5/SSDA5. |
| 17 | VCC | power_in | Power supply pin; operating range VCC = 2.7 to 5.5 V. |
| 18 | PB4 | bidirectional | General-purpose I/O port PB4 (5-V tolerant, open drain, input pull-up); alternate functions POE8# and IRQ3. |
| 19 | PB3 | bidirectional | General-purpose I/O port PB3 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0A, CACREF, SCK5 and RSPCKA. |
| 20 | PB2 | bidirectional | General-purpose I/O port PB2 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0B, ADSM0, TXD5/SMOSI5/SSDA5 and SDA0. |
| 21 | PB1 | bidirectional | General-purpose I/O port PB1 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0C, RXD5/SMISO5/SSCL5, SCL0 and IRQ2. |
| 22 | PB0 | bidirectional | General-purpose I/O port PB0 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0D and MOSIA. |
| 23 | PA3 | bidirectional | General-purpose I/O port PA3 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC2A and SSLA0. |
| 24 | PA2 | bidirectional | General-purpose I/O port PA2 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC2B, CTS5#/RTS5#/SS5#/SSLA1 and IRQ4. |
| 25 | P94 | bidirectional | General-purpose I/O port P94 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0C, TMO1, MISOA and IRQ1. |
| 26 | P93 | bidirectional | General-purpose I/O port P93 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC0B, TMRI1, SCK5/RSPCKA and IRQ0. |
| 27 | P76 | bidirectional | Large-current I/O port P76 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4D. |
| 28 | P75 | bidirectional | Large-current I/O port P75 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4C. |
| 29 | P74 | bidirectional | Large-current I/O port P74 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC3D. |
| 30 | P73 | bidirectional | Large-current I/O port P73 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4B. |
| 31 | P72 | bidirectional | Large-current I/O port P72 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC4A. |
| 32 | P71 | bidirectional | Large-current I/O port P71 (5-V tolerant, open drain, input pull-up); permissible output low current IOL 10.0 mA; alternate function MTIOC3B. |
| 33 | P70 | bidirectional | General-purpose I/O port P70 (5-V tolerant, open drain, input pull-up); alternate functions POE0# and IRQ5. |
| 34 | P33 | bidirectional | General-purpose I/O port P33 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC3A/MTCLKA and SSLA3. |
| 35 | VCC | power_in | Power supply pin; operating range VCC = 2.7 to 5.5 V. |
| 36 | VSS | power_in | Ground pin; connect to the system power supply 0 V. |
| 37 | P24 | bidirectional | General-purpose I/O port P24 (5-V tolerant, open drain, input pull-up); alternate functions MTIC5U/TMCI2, RSPCKA, COMP0 and IRQ3. |
| 38 | P23 | bidirectional | General-purpose I/O port P23 (5-V tolerant, open drain, input pull-up); alternate functions MTIC5V/CACREF/TMO2, MOSIA, COMP1 and IRQ4. |
| 39 | P22 | bidirectional | General-purpose I/O port P22 (5-V tolerant, open drain, input pull-up); alternate functions MTIC5W/TMRI2, MISOA, COMP2 and IRQ2. |
| 40 | P47 | bidirectional | General-purpose I/O port P47 (5-V tolerant, open drain, input pull-up); analog input AN007 for the 12-bit A/D converter, also CMPC12 and CMPC22 comparator C inputs. |
| 41 | P46 | bidirectional | General-purpose I/O port P46 (5-V tolerant, open drain, input pull-up); analog input AN006 for the 12-bit A/D converter, also CMPC02 comparator C input. |
| 42 | P45 | bidirectional | General-purpose I/O port P45 (5-V tolerant, open drain, input pull-up); analog input AN005 for the 12-bit A/D converter, also CMPC21 comparator C input. |
| 43 | P44 | bidirectional | General-purpose I/O port P44 (5-V tolerant, open drain, input pull-up); analog input AN004 for the 12-bit A/D converter, also CMPC11 comparator C input. |
| 44 | P43 | bidirectional | General-purpose I/O port P43 (5-V tolerant, open drain, input pull-up); analog input AN003 for the 12-bit A/D converter, also CMPC01 comparator C input. |
| 45 | P42 | bidirectional | General-purpose I/O port P42 (5-V tolerant, open drain, input pull-up); analog input AN002 for the 12-bit A/D converter, also CMPC20 comparator C input. |
| 46 | P41 | bidirectional | General-purpose I/O port P41 (5-V tolerant, open drain, input pull-up); analog input AN001 for the 12-bit A/D converter, also CMPC10 comparator C input. |
| 47 | P40 | bidirectional | General-purpose I/O port P40 (5-V tolerant, open drain, input pull-up); analog input AN000 for the 12-bit A/D converter, also CMPC00 comparator C input. |
| 48 | AVCC0 | power_in | Analog supply for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 49 | AVSS0 | power_in | Analog ground for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 50 | P11 | bidirectional | General-purpose I/O port P11 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC3A, MTCLKC, TMO3, IRQ1, analog input AN016 and CVREFC0 comparator reference input. |
| 51 | P10 | bidirectional | General-purpose I/O port P10 (5-V tolerant, open drain, input pull-up); alternate functions MTCLKD, TMRI3, IRQ0, analog input AN017 and CVREFC1 comparator reference input. |
| 52 | PA5 | bidirectional | General-purpose I/O port PA5 (5-V tolerant, open drain, input pull-up); alternate functions MTIOC1A, TMCI3 and MISOA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-52(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 52 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 6.5 | V | VSS = AVSS0 = VREFL0 = 0 V | 41 | |
| Input voltage Port 4 (max AVCC0+0.3 V) | Vin | -0.3 | V | 41 | |||
| Input voltage ports for 5 V tolerant | Vin | -0.3 | 6.5 | V | 41 | ||
| Input voltage except port 4 and 5 V tolerant ports (max VCC+0.3 V) | Vin | -0.3 | V | 41 | |||
| Reference power supply voltage (max AVCC0+0.3 V) | VREFH0 | -0.3 | V | 41 | |||
| Analog power supply voltage | AVCC0 | -0.3 | 6.5 | V | 41 | ||
| Analog input voltage AN000 to AN007 (max AVCC0+0.3 V) | VAN | -0.3 | V | 41 | |||
| Analog input voltage AN016, AN017 (max VCC+0.3 V) | VAN | -0.3 | V | 41 | |||
| Operating temperature, D version (product dependent) | Topr | -40 | 85 | °C | 41 | ||
| Operating temperature, G version (product dependent) | Topr | -40 | 105 | °C | 41 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 41 | ||
| Power supply voltage | VCC | 2.7 | 5.5 | V | 41 | ||
| Analog power supply voltage AVCC0 (min printed as VCC) | AVCC0 | 5.5 | V | 41 | |||
| Input level voltage RIIC input pin (SMBus) VIH (max VCC+0.3 V) | VIH | 2.1 | V | 42 | |||
| Input level voltage RIIC input pin (SMBus) VIL | VIL | -0.3 | 0.8 | V | 42 | ||
| Input leakage current RES#, MD, port E2 | Iin | 1 | μA | Vin = 0 V, VCC | 42 | ||
| Input pull-up resistor, all ports except E2 | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 42 |
| Input capacitance, all input pins | Cin | 4 | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 42 | |
| Supply current, normal operating mode, all peripheral operation Max. | ICC | 33 | mA | High-speed operating mode, ICLK = 40 MHz | 43 | ||
| Supply current, middle-speed normal operating mode, all peripheral operation Max. | ICC | 11 | mA | ICLK = 12 MHz | 43 | ||
| Supply current, software standby mode | ICC | 0.45 | 0.91 | μA | Ta = 25°C | 44 | |
| Supply current, software standby mode | ICC | 3.42 | 23.94 | μA | Ta = 105°C | 44 | |
| Permissible total consumption power, D-version | Pd | 300 | mW | D-version product | 46 | ||
| Permissible total consumption power, G-version | Pd | 125 | mW | G-version product | 46 | ||
| Analog power supply current during A/D conversion | IAVCC | 3.1 | 5.2 | mA | Sample-and-hold circuits in use | 46 | |
| Reference power supply current during A/D conversion | IREFH0 | 80 | 130 | μA | During A/D conversion | 46 | |
| Comparator C operating current | ICMP | 40 | 60 | μA | Comparator enabled (per channel) | 46 | |
| Power-on VCC rising gradient at normal startup | SrVCC | 0.02 | 20 | ms/V | At normal startup | 46 | |
| Allowable voltage change rising/falling gradient | dt/dVCC | 1 | ms/V | When VCC change exceeds VCC ±10% | 47 | ||
| Permissible error of VCL pin external capacitance | CVCL | 3.3 | 4.7 | 6.1 | μF | 47 | |
| Permissible output low current, large current ports (Ports 71 to 76, port B5, port D3) | IOL | 10 | mA | 47 | |||
| Permissible output low current, ports other than large current, normal output mode | IOL | 4 | mA | 47 | |||
| Permissible output high current, large current ports (Ports 71 to 76, port B5, port D3) | IOH | -5 | mA | 47 | |||
| Output low voltage, large current ports (Ports 71 to 76, port B5, port D3) | VOL | 0.8 | V | IOL = 10.0 mA | 48 | ||
| Output low voltage, ports other than large current, normal output mode | VOL | 0.8 | V | IOL = 1.0 mA | 48 | ||
| Maximum operating frequency, system clock (ICLK) | fmax | 40 | MHz | High-speed operating mode | 57 | ||
| EXTAL external clock input cycle time | tXcyc | 50 | ns | Figure 5.20 | 58 | ||
| Main clock oscillator oscillation frequency | fMAIN | 1 | 20 | MHz | 58 | ||
| LOCO clock oscillation frequency | fLOCO | 3.44 | 4 | 4.56 | MHz | 58 | |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | 58 | |
| HOCO clock oscillation frequency | fHOCO | 31.36 | 32 | 32.64 | MHz | Ta = -40 to +105°C | 58 |
| PLL circuit oscillation frequency | fPLL | 24 | 40 | MHz | 58 | ||
| PLL clock oscillation stabilization time | tPLL | 50 | μs | 58 | |||
| RES# pulse width at power-on | tRESWP | 3 | ms | Figure 5.27 | 61 | ||
| RES# pulse width other than power-on | tRESW | 30 | μs | Figure 5.28 | 61 | ||
| Recovery time from software standby mode, high-speed mode, crystal | tSBYMC | 2 | 3 | ms | Crystal connected to main clock oscillator, main clock oscillator operating | 62 | |
| NMI pulse width | tNMIW | 200 | ns | NMI digital filter disabled (NMIFLTE.NFLTEN = 0) | 64 | ||
| IRQ pulse width | tIRQW | 200 | ns | IRQ digital filter disabled (IRQFLTE0.FLTENi = 0) | 64 | ||
| A/D converter resolution | 12 | Bit | 76 | ||||
| A/D conversion time, high-precision channel (sample-and-hold not in use) | 1.15 | μs | Operation at PCLKD = 40 MHz; ADSSTRn.SST[7:0] = 0Eh | 76 | |||
| A/D offset error | -6.5 | 6.5 | LSB | 76 | |||
| A/D full-scale error | -6.5 | 6.5 | LSB | 76 | |||
| A/D absolute accuracy | -8 | 8 | LSB | 76 | |||
| A/D DNL differential nonlinearity error | -1.5 | 0.5 | 1.5 | LSB | 76 | ||
| A/D INL integral nonlinearity error | -4 | 2 | 4 | LSB | 76 | ||
| Internal reference voltage input channel | 1.36 | 1.43 | 1.5 | V | 76 | ||
| Comparator offset voltage | Vcioff | 40 | mV | 79 | |||
| D/A absolute accuracy | -3 | 1 | 3 | LSB | 80 | ||
| Power-on reset voltage detection level (POR) | VPOR | 1.35 | 1.5 | 1.65 | V | 81 | |
| Voltage detection circuit (LVD0) level Vdet0_0 | Vdet0_0 | 3.67 | 3.84 | 3.97 | V | 81 |
CAD (KiCad official)
- Symbol:
R5F523T5ADFD#10 - Footprint:
Package_QFP:LQFP-52_10x10mm_P0.65mm - 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
- 3D model files:
r5f523t5adfd-10-etched.step/r5f523t5adfd-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f523t5adfd-10.step/r5f523t5adfd-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (98 pp, sha256
58681e257aeabc3e, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).