main
Ray Publish 0.1.0 0558442

R5F513T5ADFJ#30

RENESAS · Pre-ordered MCUs · LQFP-32(7x7)

R5F513T5ADFJ#30 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCL passive Connect this pin to the VSS pin via a 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin.
2 MD/FINED input MD is the operating mode control pin whose signal level must not be changed during operation; the same pin is also the FINE interface pin FINED (I/O), and MD is always used as a mode pin.
3 RES# input Reset pin; the MCU enters the reset state when this signal goes low, and it should be connected to VCC via a pull-up resistor when unused.
4 P37/XTAL output XTAL is the crystal connection output pin of the main clock oscillator (resonator 1 to 20 MHz), and the pin is also general I/O port P37 when the main clock is stopped and P37 is set as a general port.
5 VSS power_in Ground pin; connect to the system power supply (0 V).
6 P36/EXTAL input EXTAL is the main clock oscillator input pin, which also accepts an external clock up to 20 MHz (max), and the pin is also general I/O port P36 when the main clock is not used.
7 VCC power_in Power supply pin; connect it to the system power supply.
8 PE2 input Input-only port pin PE2 that also serves as the NMI non-maskable interrupt request pin, IRQ0 and POE10#; connect to VCC via a pull-up resistor when unused.
9 PB7 bidirectional General I/O port PB7 with alternate functions MTIOC3C/MTCLKD, RXD1/SMISO1/SSCL1, RXD5/SMISO5/SSCL5 and IRQ5.
10 PB6 bidirectional General I/O port PB6 with alternate functions MTIOC1B/MTIOC3A, TXD1/SMOSI1/SSDA1 and TXD5/SMOSI5/SSDA5.
11 PB3 bidirectional General I/O port PB3 with alternate functions MTIOC0A/CACREF and SCK5/SCK12.
12 PB2 bidirectional General I/O port PB2 with alternate functions MTIOC0B/MTCLKC/ADSM0, TXD5/SMOSI5/SSDA5 and SDA0.
13 PB1 bidirectional General I/O port PB1 with alternate functions MTIOC0C/MTIC5W/MTCLKA, RXD5/SMISO5/SSCL5, SCL0 and IRQ2.
14 PB0 bidirectional General I/O port PB0 with alternate functions MTIOC0D/MTIOC2A/MTCLKB, TXD12/TXDX12/SIOX12/SMOSI12/SSDA12.
15 P94 bidirectional General I/O port P94 with alternate functions MTIOC2B/MTIC5U/MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1.
16 P93 bidirectional General I/O port P93 with alternate functions MTIOC1A/MTIC5V, SCK5/SCK12 and IRQ0/ADTRG0#.
17 P76 bidirectional General I/O port P76 with alternate function MTIOC4D.
18 P75 bidirectional General I/O port P75 with alternate function MTIOC4C.
19 P74 bidirectional General I/O port P74 with alternate function MTIOC3D.
20 P73 bidirectional General I/O port P73 with alternate function MTIOC4B.
21 P72 bidirectional General I/O port P72 with alternate function MTIOC4A.
22 P71 bidirectional General I/O port P71 with alternate function MTIOC3B.
23 VCC power_in Power supply pin; connect it to the system power supply.
24 VSS power_in Ground pin; connect it to the system power supply (0 V).
25 P44 bidirectional General I/O port P44 (I/O buffer powered from AVCC0) multiplexed with analog input AN004 and comparator input CMPC12.
26 P43 bidirectional General I/O port P43 (I/O buffer powered from AVCC0) multiplexed with analog input AN003 and comparator input CMPC02.
27 P42 bidirectional General I/O port P42 (I/O buffer powered from AVCC0) multiplexed with analog input AN002 and comparator input CMPC20.
28 P41 bidirectional General I/O port P41 (I/O buffer powered from AVCC0) multiplexed with analog input AN001 and comparator input CMPC10.
29 P40 bidirectional General I/O port P40 (I/O buffer powered from AVCC0) multiplexed with analog input AN000 and comparator input CMPC00.
30 AVCC0 power_in Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used.
31 AVSS0 power_in Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used.
32 P11 bidirectional General I/O port P11 with alternate functions MTIOC3A/MTCLKA/POE8#, IRQ1 and CVREFC0 (comparator C reference voltage input).

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-32(7x7)
Category Embedded Processors & Controllers
Pins 32

CAD (KiCad official)

  • Symbol: R5F513T5ADFJ#30
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: r5f513t5adfj-30-etched.step / r5f513t5adfj-30-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f513t5adfj-30.step / r5f513t5adfj-30.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (1055 pp, sha256 b57248feedc44923, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF