Generated by kicad-footprint-generator · KiCad file format 20260206
R5F513T5ADFJ#30
RENESAS · Pre-ordered MCUs · LQFP-32(7x7)
R5F513T5ADFJ#30 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to the VSS pin via a 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin. |
| 2 | MD/FINED | input | MD is the operating mode control pin whose signal level must not be changed during operation; the same pin is also the FINE interface pin FINED (I/O), and MD is always used as a mode pin. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low, and it should be connected to VCC via a pull-up resistor when unused. |
| 4 | P37/XTAL | output | XTAL is the crystal connection output pin of the main clock oscillator (resonator 1 to 20 MHz), and the pin is also general I/O port P37 when the main clock is stopped and P37 is set as a general port. |
| 5 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 6 | P36/EXTAL | input | EXTAL is the main clock oscillator input pin, which also accepts an external clock up to 20 MHz (max), and the pin is also general I/O port P36 when the main clock is not used. |
| 7 | VCC | power_in | Power supply pin; connect it to the system power supply. |
| 8 | PE2 | input | Input-only port pin PE2 that also serves as the NMI non-maskable interrupt request pin, IRQ0 and POE10#; connect to VCC via a pull-up resistor when unused. |
| 9 | PB7 | bidirectional | General I/O port PB7 with alternate functions MTIOC3C/MTCLKD, RXD1/SMISO1/SSCL1, RXD5/SMISO5/SSCL5 and IRQ5. |
| 10 | PB6 | bidirectional | General I/O port PB6 with alternate functions MTIOC1B/MTIOC3A, TXD1/SMOSI1/SSDA1 and TXD5/SMOSI5/SSDA5. |
| 11 | PB3 | bidirectional | General I/O port PB3 with alternate functions MTIOC0A/CACREF and SCK5/SCK12. |
| 12 | PB2 | bidirectional | General I/O port PB2 with alternate functions MTIOC0B/MTCLKC/ADSM0, TXD5/SMOSI5/SSDA5 and SDA0. |
| 13 | PB1 | bidirectional | General I/O port PB1 with alternate functions MTIOC0C/MTIC5W/MTCLKA, RXD5/SMISO5/SSCL5, SCL0 and IRQ2. |
| 14 | PB0 | bidirectional | General I/O port PB0 with alternate functions MTIOC0D/MTIOC2A/MTCLKB, TXD12/TXDX12/SIOX12/SMOSI12/SSDA12. |
| 15 | P94 | bidirectional | General I/O port P94 with alternate functions MTIOC2B/MTIC5U/MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1. |
| 16 | P93 | bidirectional | General I/O port P93 with alternate functions MTIOC1A/MTIC5V, SCK5/SCK12 and IRQ0/ADTRG0#. |
| 17 | P76 | bidirectional | General I/O port P76 with alternate function MTIOC4D. |
| 18 | P75 | bidirectional | General I/O port P75 with alternate function MTIOC4C. |
| 19 | P74 | bidirectional | General I/O port P74 with alternate function MTIOC3D. |
| 20 | P73 | bidirectional | General I/O port P73 with alternate function MTIOC4B. |
| 21 | P72 | bidirectional | General I/O port P72 with alternate function MTIOC4A. |
| 22 | P71 | bidirectional | General I/O port P71 with alternate function MTIOC3B. |
| 23 | VCC | power_in | Power supply pin; connect it to the system power supply. |
| 24 | VSS | power_in | Ground pin; connect it to the system power supply (0 V). |
| 25 | P44 | bidirectional | General I/O port P44 (I/O buffer powered from AVCC0) multiplexed with analog input AN004 and comparator input CMPC12. |
| 26 | P43 | bidirectional | General I/O port P43 (I/O buffer powered from AVCC0) multiplexed with analog input AN003 and comparator input CMPC02. |
| 27 | P42 | bidirectional | General I/O port P42 (I/O buffer powered from AVCC0) multiplexed with analog input AN002 and comparator input CMPC20. |
| 28 | P41 | bidirectional | General I/O port P41 (I/O buffer powered from AVCC0) multiplexed with analog input AN001 and comparator input CMPC10. |
| 29 | P40 | bidirectional | General I/O port P40 (I/O buffer powered from AVCC0) multiplexed with analog input AN000 and comparator input CMPC00. |
| 30 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 31 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 32 | P11 | bidirectional | General I/O port P11 with alternate functions MTIOC3A/MTCLKA/POE8#, IRQ1 and CVREFC0 (comparator C reference voltage input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
R5F513T5ADFJ#30 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f513t5adfj-30-etched.step/r5f513t5adfj-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f513t5adfj-30.step/r5f513t5adfj-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (1055 pp, sha256
b57248feedc44923, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).