main
Ray Publish 0.1.0 1d6b572

R5F51306BDFN#10

RENESAS · Pre-ordered MCUs · LQFP-80(12x12)

R5F51306BDFN#10 from RENESAS, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P06 bidirectional I/O port P06 whose I/O buffer power source is AVCC0 (Table 1.6 note 1).
2 P03 bidirectional I/O port P03 (I/O buffer powered from AVCC0) that also serves as the D/A converter analog output DA0.
3 P04 bidirectional I/O port P04 whose I/O buffer power source is AVCC0 (Table 1.6 note 1).
4 VCL passive Connect to VSS through a 4.7 µF multilayer ceramic smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin.
5 PJ1 bidirectional I/O port PJ1 that also serves as MTU function MTIOC3A.
6 MD input Operating mode setting pin whose signal level must not be changed during operation; the same pin row also lists the FINED on-chip emulator interface.
7 XCIN input Input pin of the sub-clock oscillator; connect a crystal between XCIN and XCOUT.
8 XCOUT output Output pin of the sub-clock oscillator; connect a crystal between XCIN and XCOUT.
9 RES# input Reset pin; the MCU enters the reset state when this signal goes low.
10 XTAL output Pin for connecting the main clock crystal, also usable as port P37; an external clock can be input through the EXTAL pin.
11 VSS power_in Ground pin; connect to the system power supply 0 V.
12 EXTAL input Main clock input pin for an external clock or crystal connection, also usable as port P36.
13 VCC power_in Power supply pin; connect to the system supply, which operates from 1.8 V to 5.5 V.
14 P35 input Input-only port P35 that also serves as the non-maskable interrupt request pin NMI.
15 P34 bidirectional I/O port P34 multiplexed with MTIOC0A, TMCI3, POE2#, SCI6 SCK6 and IRQ4.
16 P32 bidirectional I/O port P32 multiplexed with MTIOC0C, TMO3, SCI6 TXD6/SMOSI6/SSDA6, touch pin TS0, and IRQ2/RTCOUT.
17 P31 bidirectional I/O port P31 multiplexed with MTIOC4D, TMCI2, SCI1 CTS1#/RTS1#/SS1#, touch pin TS1, and IRQ1.
18 P30 bidirectional I/O port P30 multiplexed with MTIOC4B, TMRI3, POE8#, SCI1 RXD1/SMISO1/SSCL1, touch pin TS2, and IRQ0.
19 P27 bidirectional I/O port P27 multiplexed with MTIOC2B, TMCI3, SCI1 SCK1, and touch pin TS3.
20 P26 bidirectional I/O port P26 multiplexed with MTIOC2A, TMO1, SCI1 TXD1/SMOSI1/SSDA1, and touch pin TS4.
21 P21 bidirectional I/O port P21 multiplexed with MTIOC1B and TMCI0.
22 P20 bidirectional I/O port P20 multiplexed with MTIOC1A and TMRI0.
23 P17 bidirectional 5-V tolerant I/O port P17 (open drain capable, input pull-up) multiplexed with MTIOC3A/MTIOC3B/TMO1/POE8#, SCI1 SCK1/MISOA/SDA0, and IRQ7.
24 P16 bidirectional 5-V tolerant I/O port P16 multiplexed with MTIOC3C/MTIOC3D/TMO2, SCI1 TXD1/SMOSI1/SSDA1/MOSIA/SCL0, IRQ6/RTCOUT and ADTRG0#.
25 P15 bidirectional I/O port P15 multiplexed with MTIOC0B, MTCLKB, TMCI2, SCI1 RXD1/SMISO1/SSCL1, touch pin TS5, and IRQ5.
26 P14 bidirectional I/O port P14 multiplexed with MTIOC3A, MTCLKA, TMRI2, SCI1 CTS1#/RTS1#/SS1#, touch pin TS6, and IRQ4.
27 P13 bidirectional 5-V tolerant I/O port P13 multiplexed with MTIOC0B, TMO3, SDA0 and IRQ3.
28 P12 bidirectional 5-V tolerant I/O port P12 multiplexed with TMCI1, SCL0 and IRQ2.
29 PH3 bidirectional I/O port PH3 multiplexed with TMCI0 and touch pin TS7.
30 PH2 bidirectional I/O port PH2 multiplexed with TMRI0, touch pin TS8 and IRQ1.
31 PH1 bidirectional I/O port PH1 multiplexed with TMO0, touch pin TS9 and IRQ0.
32 PH0 bidirectional I/O port PH0 multiplexed with touch pin TS10 and CACREF.
33 P55 bidirectional I/O port P55 multiplexed with MTIOC4D, TMO3 and touch pin TS11.
34 P54 bidirectional I/O port P54 multiplexed with MTIOC4B, TMCI1 and touch pin TS12.
35 PC7 bidirectional I/O port PC7 multiplexed with MTIOC3A, TMO2, MTCLKB, RSPI MISOA, touch pin TS13 and CACREF.
36 PC6 bidirectional I/O port PC6 multiplexed with MTIOC3C, MTCLKA, TMCI2, RSPI MOSIA and touch pin TS14.
37 PC5 bidirectional I/O port PC5 multiplexed with MTIOC3B, MTCLKD, TMRI2, RSPI RSPCKA and touch pin TS15.
38 PC4 bidirectional I/O port PC4 multiplexed with MTIOC3D, MTCLKC, TMCI1, POE0#, SCI5 SCK5/SSLA0; this pin also carries the TSCAP function, which connects to VSS via a 10 nF decoupling capacitor.
39 PC3 bidirectional I/O port PC3 multiplexed with MTIOC4D, SCI5 TXD5/SMOSI5/SSDA5 and touch pin TS16.
40 PC2 bidirectional I/O port PC2 multiplexed with MTIOC4B, SCI5 RXD5/SMISO5/SSCL5/SSLA3 and touch pin TS17.
41 PB7/PC1 bidirectional I/O port PB7 (PC1 when the port switching function is selected) multiplexed with MTIOC3B and touch pin TS18.
42 PB6/PC0 bidirectional I/O port PB6 (PC0 when the port switching function is selected) multiplexed with MTIOC3D and touch pin TS19.
43 PB5 bidirectional I/O port PB5 multiplexed with MTIOC2A, MTIOC1B, TMRI1, POE1# and touch pin TS20.
44 PB4 bidirectional I/O port PB4 multiplexed with touch pin TS21.
45 PB3 bidirectional I/O port PB3 multiplexed with MTIOC0A, MTIOC4A, TMO0, POE3#, SCI6 SCK6 and touch pin TS22.
46 PB2 bidirectional I/O port PB2 multiplexed with SCI6 CTS6#/RTS6#/SS6# and touch pin TS23.
47 PB1 bidirectional I/O port PB1 multiplexed with MTIOC0C, MTIOC4C, TMCI0, SCI6 TXD6/SMOSI6/SSDA6, touch pin TS24, IRQ4 and CMPOB1.
48 VCC power_in Power supply pin; connect to the system supply, which operates from 1.8 V to 5.5 V.
49 PB0 bidirectional I/O port PB0 multiplexed with MTIC5W, SCI6 RXD6/SMISO6/SSCL6, RSPI RSPCKA and touch pin TS25.
50 VSS power_in Ground pin; connect to the system power supply 0 V.
51 PA6 bidirectional I/O port PA6 multiplexed with MTIC5V, MTCLKB, TMCI3, POE2#, SCI5 CTS5#/RTS5#/SS5#, RSPI MOSIA and touch pin TS26.
52 PA5 bidirectional I/O port PA5 multiplexed with RSPI RSPCKA and touch pin TS27.
53 PA4 bidirectional I/O port PA4 multiplexed with MTIC5U, MTCLKA, TMRI0, SCI5 TXD5/SMOSI5/SSDA5/SSLA0, touch pin TS28, IRQ5 and CVREFB1.
54 PA3 bidirectional I/O port PA3 multiplexed with MTIOC0D, MTCLKD, SCI5 RXD5/SMISO5/SSCL5, touch pin TS29, IRQ6 and CMPB1.
55 PA2 bidirectional I/O port PA2 multiplexed with SCI5 RXD5/SMISO5/SSCL5/SSLA3 and touch pin TS30.
56 PA1 bidirectional I/O port PA1 multiplexed with MTIOC0B, MTCLKC, SCI5 SCK5/SSLA2 and touch pin TS31.
57 PA0 bidirectional I/O port PA0 multiplexed with MTIOC4A, SSLA1, touch pin TS32 and CACREF.
58 PE5 bidirectional I/O port PE5 multiplexed with MTIOC4C, MTIOC2B, IRQ5, AN021 and CMPOB0.
59 PE4 bidirectional I/O port PE4 multiplexed with MTIOC4D, MTIOC1A, touch pin TS33, AN020, CMPA2 and CLKOUT.
60 PE3 bidirectional I/O port PE3 multiplexed with MTIOC4B, POE8#, SCI12 CTS12#/RTS12#/SS12#, touch pin TS34, AN019 and CLKOUT.
61 PE2 bidirectional I/O port PE2 multiplexed with MTIOC4A, SCI12 RXD12/RXDX12/SMISO12/SSCL12, touch pin TS35, IRQ7, AN018 and CVREFB0.
62 PE1 bidirectional I/O port PE1 multiplexed with MTIOC4C, SCI12 TXD12/TXDX12/SIOX12/SMOSI12/SSDA12, AN017 and CMPB0.
63 PE0 bidirectional I/O port PE0 multiplexed with SCI12 SCK12 and analog input AN016.
64 PD2 bidirectional I/O port PD2 multiplexed with MTIOC4D, SCI6 SCK6, IRQ2 and analog input AN026.
65 PD1 bidirectional I/O port PD1 multiplexed with MTIOC4B, SCI6 RXD6/SMISO6/SSCL6, IRQ1 and analog input AN025.
66 PD0 bidirectional I/O port PD0 multiplexed with SCI6 TXD6/SMOSI6/SSDA6, IRQ0 and analog input AN024.
67 P47 bidirectional I/O port P47 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN007.
68 P46 bidirectional I/O port P46 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN006.
69 P45 bidirectional I/O port P45 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN005.
70 P44 bidirectional I/O port P44 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN004.
71 P43 bidirectional I/O port P43 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN003.
72 P42 bidirectional I/O port P42 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN002.
73 P41 bidirectional I/O port P41 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN001.
74 VREFL0 power_in Analog reference ground pin for the 12-bit A/D converter (port PJ7 alternate function).
75 P40 bidirectional I/O port P40 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN000.
76 VREFH0 power_in Analog reference voltage supply pin for the 12-bit A/D converter (port PJ6 alternate function).
77 AVCC0 power_in Analog voltage supply pin for the 12-bit A/D converter and D/A converter; connect to VCC when those converters are not used.
78 P07 bidirectional I/O port P07 (I/O buffer powered from AVCC0) that also serves as the external trigger input ADTRG0#.
79 AVSS0 power_in Analog ground pin for the 12-bit A/D converter and D/A converter; connect to VSS when those converters are not used.
80 P05 bidirectional I/O port P05 (I/O buffer powered from AVCC0) that also serves as the D/A converter analog output DA1.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-80(12x12)
Category Embedded Processors & Controllers
Pins 80

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC -0.3 6.5 V VSS = AVSS0 = VREFL0 = 0 V 48
Input voltage, 5-V tolerant ports Vin -0.3 6.5 V VSS = AVSS0 = VREFL0 = 0 V 48
Input voltage, ports P03-P07, P40-P47, PJ6, PJ7 Vin -0.3 V VSS = AVSS0 = VREFL0 = 0 V 48
Input voltage, other ports Vin -0.3 V VSS = AVSS0 = VREFL0 = 0 V 48
Reference power supply voltage VREFH0 -0.3 V VSS = AVSS0 = VREFL0 = 0 V 48
Analog power supply voltage AVCC0 -0.3 6.5 V VSS = AVSS0 = VREFL0 = 0 V 48
Analog input voltage, AN000-AN007 VAN -0.3 V VSS = AVSS0 = VREFL0 = 0 V 48
Analog input voltage, AN016-AN031 VAN -0.3 V VSS = AVSS0 = VREFL0 = 0 V 48
Operating temperature (D version) Topr -40 85 °C D version (G version -40 to +105 °C not used) 48
Storage temperature Tstg -55 125 °C 48
Power supply voltage VCC 1.8 5.5 V 49
Analog power supply voltage AVCC0 1.8 5.5 V 49
Reference power supply voltage VREFH0 1.8 V maximum printed as AVCC0 49
Permissible total power consumption (D version) Pd 300 mW D version 65
Schmitt trigger input voltage, RIIC input pin (except SMBus) VIH 5.8 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
Schmitt trigger input voltage, ports P12, P13, P16, P17 (5 V tolerant) VIH 5.8 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
Input level voltage, RIIC input pin (SMBus) VIH 2.1 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
RIIC input pin (except SMBus) VIL -0.3 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
Ports P03-P07, P40-P47, PJ6, PJ7 VIL -0.3 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
Ports other than above VIL -0.3 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
MD VIL -0.3 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
EXTAL (external clock input) VIL -0.3 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
RIIC input pin (SMBus) VIL -0.3 0.8 V 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 50
Ports P12, P13, P16, P17 (5 V tolerant) VIH 5.8 V 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C 51
Ports P03-P07, P40-P47, PJ6, PJ7 VIL -0.3 V 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C 51
Ports other than above VIL -0.3 V 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C 51
MD VIL -0.3 V 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C 51
EXTAL (external clock input) VIL -0.3 V 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C 51
Input leakage current, RES#, MD, port P35 /Iin/ 1 μA Vin = 0 V, VCC 51
Three-state leakage current (off-state), ports for 5-V tolerant /ITSI/ 1 μA Vin = 0 V, 5.8 V 51
Three-state leakage current (off-state), ports except 5 V tolerant ITSI 0.2 μA Vin = 0 V, VCC 51
Input capacitance, all input pins except P35 Cin 15 pF Vin = 0 mV, f = 1 MHz, Ta = 25°C 51
Input capacitance, port P35 Cin 30 pF Vin = 0 mV, f = 1 MHz, Ta = 25°C 51
Input pull-up resistor, all ports except P35 RU 10 20 50 kΩ Vin = 0 V 51
Analog power supply current, during A/D conversion (high-speed) IAVCC 0.7 1.7 mA 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 66
Analog power supply current, during A/D conversion (low-speed) IAVCC 0.6 1 mA 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 66
Analog power supply current, during D/A conversion (per channel) IAVCC 1.5 mA per channel 66
Analog power supply current, waiting for A/D and D/A conversion (all units) IAVCC 0.4 μA all units 66
Reference power supply current, during A/D conversion (high-speed) IREFH0 25 150 μA during A/D conversion (high-speed conversion) 66
Reference power supply current, waiting for A/D conversion (all units) IREFH0 60 nA all units 66
Comparator B operating current, window function enabled ICMP 12.5 28.6 μA window function enabled 66
Comparator B operating current, high-speed mode (per channel) ICMP 3.2 16.2 μA comparator high-speed mode, per channel 66
Comparator B operating current, low-speed mode (per channel) ICMP 1.7 4.4 μA comparator low-speed mode, per channel 66
RAM standby voltage VRAM 1.8 V 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C 66
Power-on VCC rising gradient at normal startup SrVCC 0.02 20 ms/V at normal startup 66
Power-on VCC rising gradient during fast startup time SrVCC 0.02 2 ms/V during fast startup time 66
Allowable ripple frequency fr(VCC) 10 kHz Figure 5.11, Vr(VCC) ≤ VCC × 0.2 67
Allowable ripple frequency fr(VCC) 1 MHz Figure 5.11, Vr(VCC) ≤ VCC × 0.08 67
Allowable ripple frequency fr(VCC) 10 MHz Figure 5.11, Vr(VCC) ≤ VCC × 0.06 67
Allowable voltage change rising/falling gradient dt/dVCC 1 ms/V when VCC change exceeds VCC ±10% 67
Permissible error of VCL pin external capacitance CVCL 1.4 4.7 7 μF Ta = -40 to +105°C 67
Permissible output low current (average value per pin), ports P03-P07, P40-P47, PJ6, PJ7 IOL 4 mA Ta = -40 to +85°C 68
Permissible output low current (average value per pin), other ports, normal output mode IOL 4 mA Ta = -40 to +85°C 68
Permissible output low current (average value per pin), other ports, high-drive output mode IOL 8 mA Ta = -40 to +85°C 68
Permissible output high current (average value per pin), ports P03-P07, P40-P47, PJ6, PJ7 IOH -4 mA Ta = -40 to +85°C 68
Permissible output high current (average value per pin), other ports, normal output mode IOH -4 mA Ta = -40 to +85°C 68
Permissible output high current (average value per pin), other ports, high-drive output mode IOH -8 mA Ta = -40 to +85°C 68
Permissible output low current, total of all output pins ΣIOL 80 mA Ta = -40 to +85°C 68
Permissible output high current, total of all output pins ΣIOH -80 mA Ta = -40 to +85°C 68

CAD (KiCad official)

  • Symbol: R5F51306BDFN#10
  • Footprint: Package_QFP:LQFP-80_12x12mm_P0.5mm
  • 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
  • 3D model files: r5f51306bdfn-10-etched.step / r5f51306bdfn-10-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f51306bdfn-10.step / r5f51306bdfn-10.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (134 pp, sha256 cb97392d5fcb552b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF