3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR5F51306BDFN#10
RENESAS · Pre-ordered MCUs · LQFP-80(12x12)
R5F51306BDFN#10 from RENESAS, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P06 | bidirectional | I/O port P06 whose I/O buffer power source is AVCC0 (Table 1.6 note 1). |
| 2 | P03 | bidirectional | I/O port P03 (I/O buffer powered from AVCC0) that also serves as the D/A converter analog output DA0. |
| 3 | P04 | bidirectional | I/O port P04 whose I/O buffer power source is AVCC0 (Table 1.6 note 1). |
| 4 | VCL | passive | Connect to VSS through a 4.7 µF multilayer ceramic smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin. |
| 5 | PJ1 | bidirectional | I/O port PJ1 that also serves as MTU function MTIOC3A. |
| 6 | MD | input | Operating mode setting pin whose signal level must not be changed during operation; the same pin row also lists the FINED on-chip emulator interface. |
| 7 | XCIN | input | Input pin of the sub-clock oscillator; connect a crystal between XCIN and XCOUT. |
| 8 | XCOUT | output | Output pin of the sub-clock oscillator; connect a crystal between XCIN and XCOUT. |
| 9 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 10 | XTAL | output | Pin for connecting the main clock crystal, also usable as port P37; an external clock can be input through the EXTAL pin. |
| 11 | VSS | power_in | Ground pin; connect to the system power supply 0 V. |
| 12 | EXTAL | input | Main clock input pin for an external clock or crystal connection, also usable as port P36. |
| 13 | VCC | power_in | Power supply pin; connect to the system supply, which operates from 1.8 V to 5.5 V. |
| 14 | P35 | input | Input-only port P35 that also serves as the non-maskable interrupt request pin NMI. |
| 15 | P34 | bidirectional | I/O port P34 multiplexed with MTIOC0A, TMCI3, POE2#, SCI6 SCK6 and IRQ4. |
| 16 | P32 | bidirectional | I/O port P32 multiplexed with MTIOC0C, TMO3, SCI6 TXD6/SMOSI6/SSDA6, touch pin TS0, and IRQ2/RTCOUT. |
| 17 | P31 | bidirectional | I/O port P31 multiplexed with MTIOC4D, TMCI2, SCI1 CTS1#/RTS1#/SS1#, touch pin TS1, and IRQ1. |
| 18 | P30 | bidirectional | I/O port P30 multiplexed with MTIOC4B, TMRI3, POE8#, SCI1 RXD1/SMISO1/SSCL1, touch pin TS2, and IRQ0. |
| 19 | P27 | bidirectional | I/O port P27 multiplexed with MTIOC2B, TMCI3, SCI1 SCK1, and touch pin TS3. |
| 20 | P26 | bidirectional | I/O port P26 multiplexed with MTIOC2A, TMO1, SCI1 TXD1/SMOSI1/SSDA1, and touch pin TS4. |
| 21 | P21 | bidirectional | I/O port P21 multiplexed with MTIOC1B and TMCI0. |
| 22 | P20 | bidirectional | I/O port P20 multiplexed with MTIOC1A and TMRI0. |
| 23 | P17 | bidirectional | 5-V tolerant I/O port P17 (open drain capable, input pull-up) multiplexed with MTIOC3A/MTIOC3B/TMO1/POE8#, SCI1 SCK1/MISOA/SDA0, and IRQ7. |
| 24 | P16 | bidirectional | 5-V tolerant I/O port P16 multiplexed with MTIOC3C/MTIOC3D/TMO2, SCI1 TXD1/SMOSI1/SSDA1/MOSIA/SCL0, IRQ6/RTCOUT and ADTRG0#. |
| 25 | P15 | bidirectional | I/O port P15 multiplexed with MTIOC0B, MTCLKB, TMCI2, SCI1 RXD1/SMISO1/SSCL1, touch pin TS5, and IRQ5. |
| 26 | P14 | bidirectional | I/O port P14 multiplexed with MTIOC3A, MTCLKA, TMRI2, SCI1 CTS1#/RTS1#/SS1#, touch pin TS6, and IRQ4. |
| 27 | P13 | bidirectional | 5-V tolerant I/O port P13 multiplexed with MTIOC0B, TMO3, SDA0 and IRQ3. |
| 28 | P12 | bidirectional | 5-V tolerant I/O port P12 multiplexed with TMCI1, SCL0 and IRQ2. |
| 29 | PH3 | bidirectional | I/O port PH3 multiplexed with TMCI0 and touch pin TS7. |
| 30 | PH2 | bidirectional | I/O port PH2 multiplexed with TMRI0, touch pin TS8 and IRQ1. |
| 31 | PH1 | bidirectional | I/O port PH1 multiplexed with TMO0, touch pin TS9 and IRQ0. |
| 32 | PH0 | bidirectional | I/O port PH0 multiplexed with touch pin TS10 and CACREF. |
| 33 | P55 | bidirectional | I/O port P55 multiplexed with MTIOC4D, TMO3 and touch pin TS11. |
| 34 | P54 | bidirectional | I/O port P54 multiplexed with MTIOC4B, TMCI1 and touch pin TS12. |
| 35 | PC7 | bidirectional | I/O port PC7 multiplexed with MTIOC3A, TMO2, MTCLKB, RSPI MISOA, touch pin TS13 and CACREF. |
| 36 | PC6 | bidirectional | I/O port PC6 multiplexed with MTIOC3C, MTCLKA, TMCI2, RSPI MOSIA and touch pin TS14. |
| 37 | PC5 | bidirectional | I/O port PC5 multiplexed with MTIOC3B, MTCLKD, TMRI2, RSPI RSPCKA and touch pin TS15. |
| 38 | PC4 | bidirectional | I/O port PC4 multiplexed with MTIOC3D, MTCLKC, TMCI1, POE0#, SCI5 SCK5/SSLA0; this pin also carries the TSCAP function, which connects to VSS via a 10 nF decoupling capacitor. |
| 39 | PC3 | bidirectional | I/O port PC3 multiplexed with MTIOC4D, SCI5 TXD5/SMOSI5/SSDA5 and touch pin TS16. |
| 40 | PC2 | bidirectional | I/O port PC2 multiplexed with MTIOC4B, SCI5 RXD5/SMISO5/SSCL5/SSLA3 and touch pin TS17. |
| 41 | PB7/PC1 | bidirectional | I/O port PB7 (PC1 when the port switching function is selected) multiplexed with MTIOC3B and touch pin TS18. |
| 42 | PB6/PC0 | bidirectional | I/O port PB6 (PC0 when the port switching function is selected) multiplexed with MTIOC3D and touch pin TS19. |
| 43 | PB5 | bidirectional | I/O port PB5 multiplexed with MTIOC2A, MTIOC1B, TMRI1, POE1# and touch pin TS20. |
| 44 | PB4 | bidirectional | I/O port PB4 multiplexed with touch pin TS21. |
| 45 | PB3 | bidirectional | I/O port PB3 multiplexed with MTIOC0A, MTIOC4A, TMO0, POE3#, SCI6 SCK6 and touch pin TS22. |
| 46 | PB2 | bidirectional | I/O port PB2 multiplexed with SCI6 CTS6#/RTS6#/SS6# and touch pin TS23. |
| 47 | PB1 | bidirectional | I/O port PB1 multiplexed with MTIOC0C, MTIOC4C, TMCI0, SCI6 TXD6/SMOSI6/SSDA6, touch pin TS24, IRQ4 and CMPOB1. |
| 48 | VCC | power_in | Power supply pin; connect to the system supply, which operates from 1.8 V to 5.5 V. |
| 49 | PB0 | bidirectional | I/O port PB0 multiplexed with MTIC5W, SCI6 RXD6/SMISO6/SSCL6, RSPI RSPCKA and touch pin TS25. |
| 50 | VSS | power_in | Ground pin; connect to the system power supply 0 V. |
| 51 | PA6 | bidirectional | I/O port PA6 multiplexed with MTIC5V, MTCLKB, TMCI3, POE2#, SCI5 CTS5#/RTS5#/SS5#, RSPI MOSIA and touch pin TS26. |
| 52 | PA5 | bidirectional | I/O port PA5 multiplexed with RSPI RSPCKA and touch pin TS27. |
| 53 | PA4 | bidirectional | I/O port PA4 multiplexed with MTIC5U, MTCLKA, TMRI0, SCI5 TXD5/SMOSI5/SSDA5/SSLA0, touch pin TS28, IRQ5 and CVREFB1. |
| 54 | PA3 | bidirectional | I/O port PA3 multiplexed with MTIOC0D, MTCLKD, SCI5 RXD5/SMISO5/SSCL5, touch pin TS29, IRQ6 and CMPB1. |
| 55 | PA2 | bidirectional | I/O port PA2 multiplexed with SCI5 RXD5/SMISO5/SSCL5/SSLA3 and touch pin TS30. |
| 56 | PA1 | bidirectional | I/O port PA1 multiplexed with MTIOC0B, MTCLKC, SCI5 SCK5/SSLA2 and touch pin TS31. |
| 57 | PA0 | bidirectional | I/O port PA0 multiplexed with MTIOC4A, SSLA1, touch pin TS32 and CACREF. |
| 58 | PE5 | bidirectional | I/O port PE5 multiplexed with MTIOC4C, MTIOC2B, IRQ5, AN021 and CMPOB0. |
| 59 | PE4 | bidirectional | I/O port PE4 multiplexed with MTIOC4D, MTIOC1A, touch pin TS33, AN020, CMPA2 and CLKOUT. |
| 60 | PE3 | bidirectional | I/O port PE3 multiplexed with MTIOC4B, POE8#, SCI12 CTS12#/RTS12#/SS12#, touch pin TS34, AN019 and CLKOUT. |
| 61 | PE2 | bidirectional | I/O port PE2 multiplexed with MTIOC4A, SCI12 RXD12/RXDX12/SMISO12/SSCL12, touch pin TS35, IRQ7, AN018 and CVREFB0. |
| 62 | PE1 | bidirectional | I/O port PE1 multiplexed with MTIOC4C, SCI12 TXD12/TXDX12/SIOX12/SMOSI12/SSDA12, AN017 and CMPB0. |
| 63 | PE0 | bidirectional | I/O port PE0 multiplexed with SCI12 SCK12 and analog input AN016. |
| 64 | PD2 | bidirectional | I/O port PD2 multiplexed with MTIOC4D, SCI6 SCK6, IRQ2 and analog input AN026. |
| 65 | PD1 | bidirectional | I/O port PD1 multiplexed with MTIOC4B, SCI6 RXD6/SMISO6/SSCL6, IRQ1 and analog input AN025. |
| 66 | PD0 | bidirectional | I/O port PD0 multiplexed with SCI6 TXD6/SMOSI6/SSDA6, IRQ0 and analog input AN024. |
| 67 | P47 | bidirectional | I/O port P47 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN007. |
| 68 | P46 | bidirectional | I/O port P46 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN006. |
| 69 | P45 | bidirectional | I/O port P45 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN005. |
| 70 | P44 | bidirectional | I/O port P44 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN004. |
| 71 | P43 | bidirectional | I/O port P43 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN003. |
| 72 | P42 | bidirectional | I/O port P42 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN002. |
| 73 | P41 | bidirectional | I/O port P41 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN001. |
| 74 | VREFL0 | power_in | Analog reference ground pin for the 12-bit A/D converter (port PJ7 alternate function). |
| 75 | P40 | bidirectional | I/O port P40 (I/O buffer powered from AVCC0) that also serves as 12-bit A/D analog input AN000. |
| 76 | VREFH0 | power_in | Analog reference voltage supply pin for the 12-bit A/D converter (port PJ6 alternate function). |
| 77 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter and D/A converter; connect to VCC when those converters are not used. |
| 78 | P07 | bidirectional | I/O port P07 (I/O buffer powered from AVCC0) that also serves as the external trigger input ADTRG0#. |
| 79 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter and D/A converter; connect to VSS when those converters are not used. |
| 80 | P05 | bidirectional | I/O port P05 (I/O buffer powered from AVCC0) that also serves as the D/A converter analog output DA1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 6.5 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | |
| Input voltage, 5-V tolerant ports | Vin | -0.3 | 6.5 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | |
| Input voltage, ports P03-P07, P40-P47, PJ6, PJ7 | Vin | -0.3 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | ||
| Input voltage, other ports | Vin | -0.3 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | ||
| Reference power supply voltage | VREFH0 | -0.3 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | ||
| Analog power supply voltage | AVCC0 | -0.3 | 6.5 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | |
| Analog input voltage, AN000-AN007 | VAN | -0.3 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | ||
| Analog input voltage, AN016-AN031 | VAN | -0.3 | V | VSS = AVSS0 = VREFL0 = 0 V | 48 | ||
| Operating temperature (D version) | Topr | -40 | 85 | °C | D version (G version -40 to +105 °C not used) | 48 | |
| Storage temperature | Tstg | -55 | 125 | °C | 48 | ||
| Power supply voltage | VCC | 1.8 | 5.5 | V | 49 | ||
| Analog power supply voltage | AVCC0 | 1.8 | 5.5 | V | 49 | ||
| Reference power supply voltage | VREFH0 | 1.8 | V | maximum printed as AVCC0 | 49 | ||
| Permissible total power consumption (D version) | Pd | 300 | mW | D version | 65 | ||
| Schmitt trigger input voltage, RIIC input pin (except SMBus) | VIH | 5.8 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| Schmitt trigger input voltage, ports P12, P13, P16, P17 (5 V tolerant) | VIH | 5.8 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| Input level voltage, RIIC input pin (SMBus) | VIH | 2.1 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| RIIC input pin (except SMBus) | VIL | -0.3 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| Ports P03-P07, P40-P47, PJ6, PJ7 | VIL | -0.3 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| Ports other than above | VIL | -0.3 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| MD | VIL | -0.3 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| EXTAL (external clock input) | VIL | -0.3 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | ||
| RIIC input pin (SMBus) | VIL | -0.3 | 0.8 | V | 2.7 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 50 | |
| Ports P12, P13, P16, P17 (5 V tolerant) | VIH | 5.8 | V | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C | 51 | ||
| Ports P03-P07, P40-P47, PJ6, PJ7 | VIL | -0.3 | V | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C | 51 | ||
| Ports other than above | VIL | -0.3 | V | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C | 51 | ||
| MD | VIL | -0.3 | V | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C | 51 | ||
| EXTAL (external clock input) | VIL | -0.3 | V | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC < 2.7 V, Ta = -40 to +105°C | 51 | ||
| Input leakage current, RES#, MD, port P35 | /Iin/ | 1 | μA | Vin = 0 V, VCC | 51 | ||
| Three-state leakage current (off-state), ports for 5-V tolerant | /ITSI/ | 1 | μA | Vin = 0 V, 5.8 V | 51 | ||
| Three-state leakage current (off-state), ports except 5 V tolerant | ITSI | 0.2 | μA | Vin = 0 V, VCC | 51 | ||
| Input capacitance, all input pins except P35 | Cin | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 51 | ||
| Input capacitance, port P35 | Cin | 30 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 51 | ||
| Input pull-up resistor, all ports except P35 | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 51 |
| Analog power supply current, during A/D conversion (high-speed) | IAVCC | 0.7 | 1.7 | mA | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 66 | |
| Analog power supply current, during A/D conversion (low-speed) | IAVCC | 0.6 | 1 | mA | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 66 | |
| Analog power supply current, during D/A conversion (per channel) | IAVCC | 1.5 | mA | per channel | 66 | ||
| Analog power supply current, waiting for A/D and D/A conversion (all units) | IAVCC | 0.4 | μA | all units | 66 | ||
| Reference power supply current, during A/D conversion (high-speed) | IREFH0 | 25 | 150 | μA | during A/D conversion (high-speed conversion) | 66 | |
| Reference power supply current, waiting for A/D conversion (all units) | IREFH0 | 60 | nA | all units | 66 | ||
| Comparator B operating current, window function enabled | ICMP | 12.5 | 28.6 | μA | window function enabled | 66 | |
| Comparator B operating current, high-speed mode (per channel) | ICMP | 3.2 | 16.2 | μA | comparator high-speed mode, per channel | 66 | |
| Comparator B operating current, low-speed mode (per channel) | ICMP | 1.7 | 4.4 | μA | comparator low-speed mode, per channel | 66 | |
| RAM standby voltage | VRAM | 1.8 | V | 1.8 V ≤ VCC = AVCC0 < 2.0 V, 2.0 V ≤ VCC ≤ 5.5 V, Ta = -40 to +105°C | 66 | ||
| Power-on VCC rising gradient at normal startup | SrVCC | 0.02 | 20 | ms/V | at normal startup | 66 | |
| Power-on VCC rising gradient during fast startup time | SrVCC | 0.02 | 2 | ms/V | during fast startup time | 66 | |
| Allowable ripple frequency | fr(VCC) | 10 | kHz | Figure 5.11, Vr(VCC) ≤ VCC × 0.2 | 67 | ||
| Allowable ripple frequency | fr(VCC) | 1 | MHz | Figure 5.11, Vr(VCC) ≤ VCC × 0.08 | 67 | ||
| Allowable ripple frequency | fr(VCC) | 10 | MHz | Figure 5.11, Vr(VCC) ≤ VCC × 0.06 | 67 | ||
| Allowable voltage change rising/falling gradient | dt/dVCC | 1 | ms/V | when VCC change exceeds VCC ±10% | 67 | ||
| Permissible error of VCL pin external capacitance | CVCL | 1.4 | 4.7 | 7 | μF | Ta = -40 to +105°C | 67 |
| Permissible output low current (average value per pin), ports P03-P07, P40-P47, PJ6, PJ7 | IOL | 4 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output low current (average value per pin), other ports, normal output mode | IOL | 4 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output low current (average value per pin), other ports, high-drive output mode | IOL | 8 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output high current (average value per pin), ports P03-P07, P40-P47, PJ6, PJ7 | IOH | -4 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output high current (average value per pin), other ports, normal output mode | IOH | -4 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output high current (average value per pin), other ports, high-drive output mode | IOH | -8 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output low current, total of all output pins | ΣIOL | 80 | mA | Ta = -40 to +85°C | 68 | ||
| Permissible output high current, total of all output pins | ΣIOH | -80 | mA | Ta = -40 to +85°C | 68 |
CAD (KiCad official)
- Symbol:
R5F51306BDFN#10 - Footprint:
Package_QFP:LQFP-80_12x12mm_P0.5mm - 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
r5f51306bdfn-10-etched.step/r5f51306bdfn-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f51306bdfn-10.step/r5f51306bdfn-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (134 pp, sha256
cb97392d5fcb552b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).