main
Ray Publish 0.1.0 5c6ec77

R5F212A7SNFA#V2

RENESAS · Pre-ordered MCUs · LQFP-64(14x14)

R5F212A7SNFA#V2 from RENESAS, in a LQFP-64(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P3_3/SSI bidirectional CMOS I/O port P3_3, also the SSU data I/O pin SSI.
2 P3_4/SDA/SCS bidirectional CMOS I/O port P3_4, shared with the I2C bus data I/O pin SDA and the SSU chip-select I/O pin SCS.
3 MODE input Connect this pin to VCC via a resistor.
4 P4_3/XCIN bidirectional CMOS I/O port P4_3, also the XCIN clock input; connect a crystal between XCIN and XCOUT, or input an external clock here with XCOUT left open.
5 P4_4/XCOUT bidirectional CMOS I/O port P4_4, also the XCIN clock output connected to the crystal between XCIN and XCOUT.
6 RESET input An 'L' level on this pin resets the MCU.
7 P4_7/XOUT output XIN clock output of the main clock generation circuit; leave open when an external clock is input to XIN. Note 1 of Figure 1.4 states P4_7 is an input-only port.
8 VSS/AVSS power_in Ground: apply 0 V to VSS; AVSS is the A/D converter analog ground.
9 P4_6/XIN input XIN clock input for the main clock generation circuit; connect a ceramic resonator or crystal between XIN and XOUT, or input an external clock here. P4_6 is an input-only port.
10 VCC/AVCC power_in Power supply: apply 2.2 V to 5.5 V to VCC; AVCC supplies the A/D converter, with a capacitor connected between AVCC and AVSS.
11 P5_4/TRCIOD bidirectional CMOS I/O port P5_4, shared with Timer RC I/O pin TRCIOD.
12 P5_3/TRCIOC bidirectional CMOS I/O port P5_3, shared with Timer RC I/O pin TRCIOC.
13 P5_2/TRCIOB bidirectional CMOS I/O port P5_2, shared with Timer RC I/O pin TRCIOB.
14 P5_1/TRCIOA/TRCTRG bidirectional CMOS I/O port P5_1, shared with Timer RC I/O pin TRCIOA and external trigger input TRCTRG.
15 P5_0/TRCCLK bidirectional CMOS I/O port P5_0, shared with the Timer RC external clock input TRCCLK.
16 P2_7/TRDIOD1 bidirectional CMOS I/O port P2_7 (LED drive capable), shared with Timer RD I/O pin TRDIOD1.
17 P2_6/TRDIOC1 bidirectional CMOS I/O port P2_6 (LED drive capable), shared with Timer RD I/O pin TRDIOC1.
18 P2_5/TRDIOB1 bidirectional CMOS I/O port P2_5 (LED drive capable), shared with Timer RD I/O pin TRDIOB1.
19 P2_4/TRDIOA1 bidirectional CMOS I/O port P2_4 (LED drive capable), shared with Timer RD I/O pin TRDIOA1.
20 P2_3/TRDIOD0 bidirectional CMOS I/O port P2_3 (LED drive capable), shared with Timer RD I/O pin TRDIOD0.
21 P2_2/TRDIOC0 bidirectional CMOS I/O port P2_2 (LED drive capable), shared with Timer RD I/O pin TRDIOC0.
22 P2_1/TRDIOB0 bidirectional CMOS I/O port P2_1 (LED drive capable), shared with Timer RD I/O pin TRDIOB0.
23 P2_0/TRDIOA0/TRDCLK bidirectional CMOS I/O port P2_0 (LED drive capable), shared with Timer RD I/O pin TRDIOA0 and external clock input TRDCLK.
24 P1_7/TRAIO/INT1 bidirectional CMOS I/O port P1_7, shared with Timer RA I/O pin TRAIO and interrupt input INT1.
25 P1_6/CLK0 bidirectional CMOS I/O port P1_6, shared with the serial interface 0 transfer clock I/O pin CLK0.
26 P1_5/RXD0/(TRAIO)/(INT1) bidirectional CMOS I/O port P1_5, serial interface 0 receive data input RXD0; TRAIO and INT1 can be assigned to this pin by a program.
27 P1_4/TXD0 bidirectional CMOS I/O port P1_4, shared with the serial interface 0 data output pin TXD0.
28 P8_6 bidirectional CMOS I/O port P8_6; no peripheral function is listed for this pin in Table 1.7.
29 P8_5/TRFO12 bidirectional CMOS I/O port P8_5, shared with Timer RF output pin TRFO12.
30 P8_4/TRFO11 bidirectional CMOS I/O port P8_4, shared with Timer RF output pin TRFO11.
31 P8_3/TRFO10/TRFI bidirectional CMOS I/O port P8_3, shared with Timer RF output pin TRFO10 and Timer RF input pin TRFI.
32 P8_2/TRFO02 bidirectional CMOS I/O port P8_2, shared with Timer RF output pin TRFO02.
33 P8_1/TRFO01 bidirectional CMOS I/O port P8_1, shared with Timer RF output pin TRFO01.
34 P8_0/TRFO00 bidirectional CMOS I/O port P8_0, shared with Timer RF output pin TRFO00.
35 P6_0/TREO bidirectional CMOS I/O port P6_0, shared with the Timer RE divided clock output pin TREO.
36 P4_5/INT0 bidirectional CMOS I/O port P4_5, shared with the INT0 interrupt input, which is also the Timer RD input pin.
37 P6_6/INT2/TXD1 bidirectional CMOS I/O port P6_6, shared with INT2 interrupt input and serial interface 1 data output TXD1.
38 P6_7/INT3/RXD1 bidirectional CMOS I/O port P6_7, shared with INT3 interrupt input and serial interface 1 data input RXD1.
39 P6_5/(CLK1)/CLK2 bidirectional CMOS I/O port P6_5, shared with serial interface 2 transfer clock CLK2; CLK1 can be assigned to this pin by a program.
40 P6_4/RXD2 bidirectional CMOS I/O port P6_4, shared with the serial interface 2 data input pin RXD2.
41 P6_3/TXD2 bidirectional CMOS I/O port P6_3, shared with the serial interface 2 data output pin TXD2.
42 P3_1/TRBO bidirectional CMOS I/O port P3_1, shared with the Timer RB output pin TRBO.
43 P3_0/TRAO bidirectional CMOS I/O port P3_0, shared with the Timer RA output pin TRAO.
44 P3_6/(INT1) bidirectional CMOS I/O port P3_6; INT1 interrupt input can be assigned to this pin by a program.
45 P3_2/(INT2) bidirectional CMOS I/O port P3_2; INT2 interrupt input can be assigned to this pin by a program.
46 P1_3/KI3/AN11 bidirectional CMOS I/O port P1_3, shared with key input interrupt KI3 and A/D converter analog input AN11.
47 P1_2/KI2/AN10 bidirectional CMOS I/O port P1_2, shared with key input interrupt KI2 and A/D converter analog input AN10.
48 P1_1/KI1/AN9 bidirectional CMOS I/O port P1_1, shared with key input interrupt KI1 and A/D converter analog input AN9.
49 P1_0/KI0/AN8 bidirectional CMOS I/O port P1_0, shared with key input interrupt KI0 and A/D converter analog input AN8.
50 P0_0/AN7 bidirectional CMOS I/O port P0_0, shared with A/D converter analog input AN7.
51 P0_1/AN6 bidirectional CMOS I/O port P0_1, shared with A/D converter analog input AN6.
52 P0_2/AN5 bidirectional CMOS I/O port P0_2, shared with A/D converter analog input AN5.
53 P0_3/AN4 bidirectional CMOS I/O port P0_3, shared with A/D converter analog input AN4.
54 P0_4/AN3 bidirectional CMOS I/O port P0_4, shared with A/D converter analog input AN3.
55 P6_2 bidirectional CMOS I/O port P6_2; no peripheral function is listed for this pin in Table 1.8.
56 P6_1 bidirectional CMOS I/O port P6_1; no peripheral function is listed for this pin in Table 1.8.
57 P0_5/AN2/CLK1 bidirectional CMOS I/O port P0_5, shared with serial interface 1 transfer clock CLK1 and A/D converter analog input AN2.
58 P0_6/AN1/DA0 bidirectional CMOS I/O port P0_6, shared with A/D converter analog input AN1 and D/A converter output DA0.
59 VSS/AVSS power_in Ground: apply 0 V to VSS; AVSS is the A/D converter analog ground.
60 P0_7/AN0/DA1 bidirectional CMOS I/O port P0_7, shared with A/D converter analog input AN0 and D/A converter output DA1.
61 VREF power_in Reference voltage input to the A/D converter and D/A converter.
62 VCC/AVCC power_in Power supply: apply 2.2 V to 5.5 V to VCC; AVCC supplies the A/D converter, with a capacitor connected between AVCC and AVSS.
63 P3_7/SSO bidirectional CMOS I/O port P3_7, shared with the SSU data I/O pin SSO.
64 P3_5/SCL/SSCK bidirectional CMOS I/O port P3_5, shared with the SSU clock I/O pin SSCK and the I2C bus clock I/O pin SCL.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-64(14x14)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC/AVCC -0.3 6.5 V 36
Input voltage (absolute maximum) VI -0.3 V Upper limit printed as VCC + 0.3 V 36
Power dissipation Pd 700 mW Topr = 25°C 36
Operating ambient temperature, N version Topr -20 85 °C N version 36
Operating ambient temperature, D version Topr -40 85 °C D version 36
Storage temperature Tstg -65 150 °C 36
Supply voltage VCC/AVCC 2.2 5.5 V 37
Peak sum output H current IOH(sum) -240 mA Sum of all pins IOH(peak) 37
Average sum output H current IOH(sum) -120 mA Sum of all pins IOH(avg) 37
Peak sum output L current IOL(sum) 240 mA Sum of all pins IOL(peak) 37
Average sum output L current IOL(sum) 120 mA Sum of all pins IOL(avg) 37
Peak output H current IOH(peak) -10 mA Except P2_0 to P2_7 37
Peak output H current IOH(peak) -40 mA P2_0 to P2_7 37
Average output H current IOH(avg) -5 mA Except P2_0 to P2_7 37
Average output H current IOH(avg) -20 mA P2_0 to P2_7 37
Peak output L current IOL(peak) 10 mA Except P2_0 to P2_7 37
Peak output L current IOL(peak) 40 mA P2_0 to P2_7 37
Average output L current IOL(avg) 5 mA Except P2_0 to P2_7 37
Average output L current IOL(avg) 20 mA P2_0 to P2_7 37
XIN clock input oscillation frequency f(XIN) 0 20 MHz 3.0 V ≤ VCC ≤ 5.5 V 37
XIN clock input oscillation frequency f(XIN) 0 10 MHz 2.7 V ≤ VCC < 3.0 V 37
XIN clock input oscillation frequency f(XIN) 0 5 MHz 2.2 V ≤ VCC < 2.7 V 37
XCIN clock input oscillation frequency f(XCIN) 0 70 kHz 2.2 V ≤ VCC ≤ 5.5 V 37
Output L voltage VOL 2 V VCC = 5 V; IOL = 5 mA; except P2_0 to P2_7, XOUT 49
Output L voltage VOL 0.45 V VCC = 5 V; IOL = 200 µA; except P2_0 to P2_7, XOUT 49
Output L voltage, P2 drive capacity HIGH VOL 2 V VCC = 5 V; IOL = 20 mA; P2_0 to P2_7 49
Output L voltage VOL 0.5 V VCC = 3 V; IOL = 1 mA; except P2_0 to P2_7, XOUT 53
Output L voltage, P2 drive capacity HIGH VOL 0.5 V VCC = 3 V; IOL = 5 mA; P2_0 to P2_7 53
Output L voltage VOL 0.5 V VCC = 2.2 V; IOL = 1 mA; except P2_0 to P2_7, XOUT 57
Input H current IIH 5 µA VCC = 5 V; VI = 5 V 49
Input L current IIL -5 µA VCC = 5 V; VI = 0 V 49
Input H current IIH 4 µA VCC = 3 V; VI = 3 V 53
Input L current IIL -4 µA VCC = 3 V; VI = 0 V 53
Input H current IIH 4 µA VCC = 2.2 V; VI = 2.2 V 57
Input L current IIL -4 µA VCC = 2.2 V; VI = 0 V 57
Pull-up resistance RPULLUP 30 50 167 kΩ VCC = 5 V; VI = 0 V 49
Pull-up resistance RPULLUP 66 160 500 kΩ VCC = 3 V; VI = 0 V 53
Pull-up resistance RPULLUP 100 200 600 kΩ VCC = 2.2 V; VI = 0 V 57
Hysteresis voltage (VT+-VT-) VT+-VT- 0.1 0.5 V VCC = 5 V; INT0-INT3, KI0-KI3, TRAIO, TRFI, RXD0, RXD1, CLK0-CLK2, SSI, SCL, SDA, SSO 49
Hysteresis voltage (VT+-VT-), RESET VT+-VT- 0.1 1 V VCC = 5 V; RESET 49
Hysteresis voltage (VT+-VT-) VT+-VT- 0.1 0.3 V VCC = 3 V; INT0-INT3, KI0-KI3, TRAIO, TRFI, RXD0, RXD1, CLK0-CLK2, SSI, SCL, SDA, SSO 53
Hysteresis voltage (VT+-VT-), RESET VT+-VT- 0.1 0.4 V VCC = 3 V; RESET 53
Hysteresis voltage (VT+-VT-) VT+-VT- 0.05 0.3 V VCC = 2.2 V; INT0-INT3, KI0-KI3, TRAIO, TRFI, RXD0, RXD1, CLK0-CLK2, SSI, SCL, SDA, SSO 57
Hysteresis voltage (VT+-VT-), RESET VT+-VT- 0.05 0.15 V VCC = 2.2 V; RESET 57
RAM hold voltage VRAM 1.8 V During stop mode 49
Power supply current ICC 12 20 mA VCC = 3.3-5.5 V; high-speed clock mode, XIN = 20 MHz square wave, no division 50
Power supply current ICC 10 16 mA VCC = 3.3-5.5 V; high-speed clock mode, XIN = 16 MHz square wave, no division 50
Power supply current ICC 6 12 mA VCC = 3.3-5.5 V; high-speed on-chip oscillator mode, fOCO = 10 MHz, no division 50
Power supply current ICC 150 400 µA VCC = 3.3-5.5 V; low-speed on-chip oscillator mode, divide-by-8, FMR47 = 1 50
Power supply current, stop mode ICC 0.7 3 µA VCC = 3.3-5.5 V; stop mode, Topr = 25°C 50
Power supply current ICC 5.5 11 mA VCC = 2.7-3.3 V; high-speed on-chip oscillator mode, fOCO = 10 MHz, no division 54
Power supply current ICC 145 400 µA VCC = 2.7-3.3 V; low-speed on-chip oscillator mode, divide-by-8, FMR47 = 1 54
Power supply current, stop mode ICC 0.65 3 µA VCC = 2.7-3.3 V; stop mode, Topr = 25°C 54
Power supply current ICC 110 300 µA VCC = 2.2-2.7 V; low-speed on-chip oscillator mode, divide-by-8, FMR47 = 1 58
Power supply current, stop mode ICC 0.6 3 µA VCC = 2.2-2.7 V; stop mode, Topr = 25°C 58
XIN input cycle time tc(XIN) 50 ns VCC = 5 V 51
XIN input cycle time tc(XIN) 100 ns VCC = 3 V 55
XIN input cycle time tc(XIN) 200 ns VCC = 2.2 V 59
XCIN input cycle time tc(XCIN) 14 µs VCC = 5 V 51

CAD (KiCad official)

  • Symbol: R5F212A7SNFA#V2
  • Footprint: Package_QFP:LQFP-64_14x14mm_P0.8mm
  • 3D model: LQFP-64(14x14) (KiCad packages3D, STEP)
  • 3D model files: r5f212a7snfa-v2-etched.step / r5f212a7snfa-v2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f212a7snfa-v2.step / r5f212a7snfa-v2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (66 pp, sha256 8267f44fac2727ab, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF