component
R5F212A7SNFA#V2
Public Made by Adomby adom
RENESAS Pre-ordered MCUs, LQFP-64(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
R5F212A7SNFA#V2
RENESAS · Pre-ordered MCUs · LQFP-64(14x14)
R5F212A7SNFA#V2 from RENESAS, in a LQFP-64(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3_3/SSI | bidirectional | CMOS I/O port P3_3, also the SSU data I/O pin SSI. |
| 2 | P3_4/SDA/SCS | bidirectional | CMOS I/O port P3_4, shared with the I2C bus data I/O pin SDA and the SSU chip-select I/O pin SCS. |
| 3 | MODE | input | Connect this pin to VCC via a resistor. |
| 4 | P4_3/XCIN | bidirectional | CMOS I/O port P4_3, also the XCIN clock input; connect a crystal between XCIN and XCOUT, or input an external clock here with XCOUT left open. |
| 5 | P4_4/XCOUT | bidirectional | CMOS I/O port P4_4, also the XCIN clock output connected to the crystal between XCIN and XCOUT. |
| 6 | RESET | input | An 'L' level on this pin resets the MCU. |
| 7 | P4_7/XOUT | output | XIN clock output of the main clock generation circuit; leave open when an external clock is input to XIN. Note 1 of Figure 1.4 states P4_7 is an input-only port. |
| 8 | VSS/AVSS | power_in | Ground: apply 0 V to VSS; AVSS is the A/D converter analog ground. |
| 9 | P4_6/XIN | input | XIN clock input for the main clock generation circuit; connect a ceramic resonator or crystal between XIN and XOUT, or input an external clock here. P4_6 is an input-only port. |
| 10 | VCC/AVCC | power_in | Power supply: apply 2.2 V to 5.5 V to VCC; AVCC supplies the A/D converter, with a capacitor connected between AVCC and AVSS. |
| 11 | P5_4/TRCIOD | bidirectional | CMOS I/O port P5_4, shared with Timer RC I/O pin TRCIOD. |
| 12 | P5_3/TRCIOC | bidirectional | CMOS I/O port P5_3, shared with Timer RC I/O pin TRCIOC. |
| 13 | P5_2/TRCIOB | bidirectional | CMOS I/O port P5_2, shared with Timer RC I/O pin TRCIOB. |
| 14 | P5_1/TRCIOA/TRCTRG | bidirectional | CMOS I/O port P5_1, shared with Timer RC I/O pin TRCIOA and external trigger input TRCTRG. |
| 15 | P5_0/TRCCLK | bidirectional | CMOS I/O port P5_0, shared with the Timer RC external clock input TRCCLK. |
| 16 | P2_7/TRDIOD1 | bidirectional | CMOS I/O port P2_7 (LED drive capable), shared with Timer RD I/O pin TRDIOD1. |
| 17 | P2_6/TRDIOC1 | bidirectional | CMOS I/O port P2_6 (LED drive capable), shared with Timer RD I/O pin TRDIOC1. |
| 18 | P2_5/TRDIOB1 | bidirectional | CMOS I/O port P2_5 (LED drive capable), shared with Timer RD I/O pin TRDIOB1. |
| 19 | P2_4/TRDIOA1 | bidirectional | CMOS I/O port P2_4 (LED drive capable), shared with Timer RD I/O pin TRDIOA1. |
| 20 | P2_3/TRDIOD0 | bidirectional | CMOS I/O port P2_3 (LED drive capable), shared with Timer RD I/O pin TRDIOD0. |
| 21 | P2_2/TRDIOC0 | bidirectional | CMOS I/O port P2_2 (LED drive capable), shared with Timer RD I/O pin TRDIOC0. |
| 22 | P2_1/TRDIOB0 | bidirectional | CMOS I/O port P2_1 (LED drive capable), shared with Timer RD I/O pin TRDIOB0. |
| 23 | P2_0/TRDIOA0/TRDCLK | bidirectional | CMOS I/O port P2_0 (LED drive capable), shared with Timer RD I/O pin TRDIOA0 and external clock input TRDCLK. |
| 24 | P1_7/TRAIO/INT1 | bidirectional | CMOS I/O port P1_7, shared with Timer RA I/O pin TRAIO and interrupt input INT1. |
| 25 | P1_6/CLK0 | bidirectional | CMOS I/O port P1_6, shared with the serial interface 0 transfer clock I/O pin CLK0. |
| 26 | P1_5/RXD0/(TRAIO)/(INT1) | bidirectional | CMOS I/O port P1_5, serial interface 0 receive data input RXD0; TRAIO and INT1 can be assigned to this pin by a program. |
| 27 | P1_4/TXD0 | bidirectional | CMOS I/O port P1_4, shared with the serial interface 0 data output pin TXD0. |
| 28 | P8_6 | bidirectional | CMOS I/O port P8_6; no peripheral function is listed for this pin in Table 1.7. |
| 29 | P8_5/TRFO12 | bidirectional | CMOS I/O port P8_5, shared with Timer RF output pin TRFO12. |
| 30 | P8_4/TRFO11 | bidirectional | CMOS I/O port P8_4, shared with Timer RF output pin TRFO11. |
| 31 | P8_3/TRFO10/TRFI | bidirectional | CMOS I/O port P8_3, shared with Timer RF output pin TRFO10 and Timer RF input pin TRFI. |
| 32 | P8_2/TRFO02 | bidirectional | CMOS I/O port P8_2, shared with Timer RF output pin TRFO02. |
| 33 | P8_1/TRFO01 | bidirectional | CMOS I/O port P8_1, shared with Timer RF output pin TRFO01. |
| 34 | P8_0/TRFO00 | bidirectional | CMOS I/O port P8_0, shared with Timer RF output pin TRFO00. |
| 35 | P6_0/TREO | bidirectional | CMOS I/O port P6_0, shared with the Timer RE divided clock output pin TREO. |
| 36 | P4_5/INT0 | bidirectional | CMOS I/O port P4_5, shared with the INT0 interrupt input, which is also the Timer RD input pin. |
| 37 | P6_6/INT2/TXD1 | bidirectional | CMOS I/O port P6_6, shared with INT2 interrupt input and serial interface 1 data output TXD1. |
| 38 | P6_7/INT3/RXD1 | bidirectional | CMOS I/O port P6_7, shared with INT3 interrupt input and serial interface 1 data input RXD1. |
| 39 | P6_5/(CLK1)/CLK2 | bidirectional | CMOS I/O port P6_5, shared with serial interface 2 transfer clock CLK2; CLK1 can be assigned to this pin by a program. |
| 40 | P6_4/RXD2 | bidirectional | CMOS I/O port P6_4, shared with the serial interface 2 data input pin RXD2. |
| 41 | P6_3/TXD2 | bidirectional | CMOS I/O port P6_3, shared with the serial interface 2 data output pin TXD2. |
| 42 | P3_1/TRBO | bidirectional | CMOS I/O port P3_1, shared with the Timer RB output pin TRBO. |
| 43 | P3_0/TRAO | bidirectional | CMOS I/O port P3_0, shared with the Timer RA output pin TRAO. |
| 44 | P3_6/(INT1) | bidirectional | CMOS I/O port P3_6; INT1 interrupt input can be assigned to this pin by a program. |
| 45 | P3_2/(INT2) | bidirectional | CMOS I/O port P3_2; INT2 interrupt input can be assigned to this pin by a program. |
| 46 | P1_3/KI3/AN11 | bidirectional | CMOS I/O port P1_3, shared with key input interrupt KI3 and A/D converter analog input AN11. |
| 47 | P1_2/KI2/AN10 | bidirectional | CMOS I/O port P1_2, shared with key input interrupt KI2 and A/D converter analog input AN10. |
| 48 | P1_1/KI1/AN9 | bidirectional | CMOS I/O port P1_1, shared with key input interrupt KI1 and A/D converter analog input AN9. |
| 49 | P1_0/KI0/AN8 | bidirectional | CMOS I/O port P1_0, shared with key input interrupt KI0 and A/D converter analog input AN8. |
| 50 | P0_0/AN7 | bidirectional | CMOS I/O port P0_0, shared with A/D converter analog input AN7. |
| 51 | P0_1/AN6 | bidirectional | CMOS I/O port P0_1, shared with A/D converter analog input AN6. |
| 52 | P0_2/AN5 | bidirectional | CMOS I/O port P0_2, shared with A/D converter analog input AN5. |
| 53 | P0_3/AN4 | bidirectional | CMOS I/O port P0_3, shared with A/D converter analog input AN4. |
| 54 | P0_4/AN3 | bidirectional | CMOS I/O port P0_4, shared with A/D converter analog input AN3. |
| 55 | P6_2 | bidirectional | CMOS I/O port P6_2; no peripheral function is listed for this pin in Table 1.8. |
| 56 | P6_1 | bidirectional | CMOS I/O port P6_1; no peripheral function is listed for this pin in Table 1.8. |
| 57 | P0_5/AN2/CLK1 | bidirectional | CMOS I/O port P0_5, shared with serial interface 1 transfer clock CLK1 and A/D converter analog input AN2. |
| 58 | P0_6/AN1/DA0 | bidirectional | CMOS I/O port P0_6, shared with A/D converter analog input AN1 and D/A converter output DA0. |
| 59 | VSS/AVSS | power_in | Ground: apply 0 V to VSS; AVSS is the A/D converter analog ground. |
| 60 | P0_7/AN0/DA1 | bidirectional | CMOS I/O port P0_7, shared with A/D converter analog input AN0 and D/A converter output DA1. |
| 61 | VREF | power_in | Reference voltage input to the A/D converter and D/A converter. |
| 62 | VCC/AVCC | power_in | Power supply: apply 2.2 V to 5.5 V to VCC; AVCC supplies the A/D converter, with a capacitor connected between AVCC and AVSS. |
| 63 | P3_7/SSO | bidirectional | CMOS I/O port P3_7, shared with the SSU data I/O pin SSO. |
| 64 | P3_5/SCL/SSCK | bidirectional | CMOS I/O port P3_5, shared with the SSU clock I/O pin SSCK and the I2C bus clock I/O pin SCL. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-64(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC/AVCC | -0.3 | 6.5 | V | 36 | ||
| Input voltage (absolute maximum) | VI | -0.3 | V | Upper limit printed as VCC + 0.3 V | 36 | ||
| Power dissipation | Pd | 700 | mW | Topr = 25°C | 36 | ||
| Operating ambient temperature, N version | Topr | -20 | 85 | °C | N version | 36 | |
| Operating ambient temperature, D version | Topr | -40 | 85 | °C | D version | 36 | |
| Storage temperature | Tstg | -65 | 150 | °C | 36 | ||
| Supply voltage | VCC/AVCC | 2.2 | 5.5 | V | 37 | ||
| Peak sum output H current | IOH(sum) | -240 | mA | Sum of all pins IOH(peak) | 37 | ||
| Average sum output H current | IOH(sum) | -120 | mA | Sum of all pins IOH(avg) | 37 | ||
| Peak sum output L current | IOL(sum) | 240 | mA | Sum of all pins IOL(peak) | 37 | ||
| Average sum output L current | IOL(sum) | 120 | mA | Sum of all pins IOL(avg) | 37 | ||
| Peak output H current | IOH(peak) | -10 | mA | Except P2_0 to P2_7 | 37 | ||
| Peak output H current | IOH(peak) | -40 | mA | P2_0 to P2_7 | 37 | ||
| Average output H current | IOH(avg) | -5 | mA | Except P2_0 to P2_7 | 37 | ||
| Average output H current | IOH(avg) | -20 | mA | P2_0 to P2_7 | 37 | ||
| Peak output L current | IOL(peak) | 10 | mA | Except P2_0 to P2_7 | 37 | ||
| Peak output L current | IOL(peak) | 40 | mA | P2_0 to P2_7 | 37 | ||
| Average output L current | IOL(avg) | 5 | mA | Except P2_0 to P2_7 | 37 | ||
| Average output L current | IOL(avg) | 20 | mA | P2_0 to P2_7 | 37 | ||
| XIN clock input oscillation frequency | f(XIN) | 0 | 20 | MHz | 3.0 V ≤ VCC ≤ 5.5 V | 37 | |
| XIN clock input oscillation frequency | f(XIN) | 0 | 10 | MHz | 2.7 V ≤ VCC < 3.0 V | 37 | |
| XIN clock input oscillation frequency | f(XIN) | 0 | 5 | MHz | 2.2 V ≤ VCC < 2.7 V | 37 | |
| XCIN clock input oscillation frequency | f(XCIN) | 0 | 70 | kHz | 2.2 V ≤ VCC ≤ 5.5 V | 37 | |
| Output L voltage | VOL | 2 | V | VCC = 5 V; IOL = 5 mA; except P2_0 to P2_7, XOUT | 49 | ||
| Output L voltage | VOL | 0.45 | V | VCC = 5 V; IOL = 200 µA; except P2_0 to P2_7, XOUT | 49 | ||
| Output L voltage, P2 drive capacity HIGH | VOL | 2 | V | VCC = 5 V; IOL = 20 mA; P2_0 to P2_7 | 49 | ||
| Output L voltage | VOL | 0.5 | V | VCC = 3 V; IOL = 1 mA; except P2_0 to P2_7, XOUT | 53 | ||
| Output L voltage, P2 drive capacity HIGH | VOL | 0.5 | V | VCC = 3 V; IOL = 5 mA; P2_0 to P2_7 | 53 | ||
| Output L voltage | VOL | 0.5 | V | VCC = 2.2 V; IOL = 1 mA; except P2_0 to P2_7, XOUT | 57 | ||
| Input H current | IIH | 5 | µA | VCC = 5 V; VI = 5 V | 49 | ||
| Input L current | IIL | -5 | µA | VCC = 5 V; VI = 0 V | 49 | ||
| Input H current | IIH | 4 | µA | VCC = 3 V; VI = 3 V | 53 | ||
| Input L current | IIL | -4 | µA | VCC = 3 V; VI = 0 V | 53 | ||
| Input H current | IIH | 4 | µA | VCC = 2.2 V; VI = 2.2 V | 57 | ||
| Input L current | IIL | -4 | µA | VCC = 2.2 V; VI = 0 V | 57 | ||
| Pull-up resistance | RPULLUP | 30 | 50 | 167 | kΩ | VCC = 5 V; VI = 0 V | 49 |
| Pull-up resistance | RPULLUP | 66 | 160 | 500 | kΩ | VCC = 3 V; VI = 0 V | 53 |
| Pull-up resistance | RPULLUP | 100 | 200 | 600 | kΩ | VCC = 2.2 V; VI = 0 V | 57 |
| Hysteresis voltage (VT+-VT-) | VT+-VT- | 0.1 | 0.5 | V | VCC = 5 V; INT0-INT3, KI0-KI3, TRAIO, TRFI, RXD0, RXD1, CLK0-CLK2, SSI, SCL, SDA, SSO | 49 | |
| Hysteresis voltage (VT+-VT-), RESET | VT+-VT- | 0.1 | 1 | V | VCC = 5 V; RESET | 49 | |
| Hysteresis voltage (VT+-VT-) | VT+-VT- | 0.1 | 0.3 | V | VCC = 3 V; INT0-INT3, KI0-KI3, TRAIO, TRFI, RXD0, RXD1, CLK0-CLK2, SSI, SCL, SDA, SSO | 53 | |
| Hysteresis voltage (VT+-VT-), RESET | VT+-VT- | 0.1 | 0.4 | V | VCC = 3 V; RESET | 53 | |
| Hysteresis voltage (VT+-VT-) | VT+-VT- | 0.05 | 0.3 | V | VCC = 2.2 V; INT0-INT3, KI0-KI3, TRAIO, TRFI, RXD0, RXD1, CLK0-CLK2, SSI, SCL, SDA, SSO | 57 | |
| Hysteresis voltage (VT+-VT-), RESET | VT+-VT- | 0.05 | 0.15 | V | VCC = 2.2 V; RESET | 57 | |
| RAM hold voltage | VRAM | 1.8 | V | During stop mode | 49 | ||
| Power supply current | ICC | 12 | 20 | mA | VCC = 3.3-5.5 V; high-speed clock mode, XIN = 20 MHz square wave, no division | 50 | |
| Power supply current | ICC | 10 | 16 | mA | VCC = 3.3-5.5 V; high-speed clock mode, XIN = 16 MHz square wave, no division | 50 | |
| Power supply current | ICC | 6 | 12 | mA | VCC = 3.3-5.5 V; high-speed on-chip oscillator mode, fOCO = 10 MHz, no division | 50 | |
| Power supply current | ICC | 150 | 400 | µA | VCC = 3.3-5.5 V; low-speed on-chip oscillator mode, divide-by-8, FMR47 = 1 | 50 | |
| Power supply current, stop mode | ICC | 0.7 | 3 | µA | VCC = 3.3-5.5 V; stop mode, Topr = 25°C | 50 | |
| Power supply current | ICC | 5.5 | 11 | mA | VCC = 2.7-3.3 V; high-speed on-chip oscillator mode, fOCO = 10 MHz, no division | 54 | |
| Power supply current | ICC | 145 | 400 | µA | VCC = 2.7-3.3 V; low-speed on-chip oscillator mode, divide-by-8, FMR47 = 1 | 54 | |
| Power supply current, stop mode | ICC | 0.65 | 3 | µA | VCC = 2.7-3.3 V; stop mode, Topr = 25°C | 54 | |
| Power supply current | ICC | 110 | 300 | µA | VCC = 2.2-2.7 V; low-speed on-chip oscillator mode, divide-by-8, FMR47 = 1 | 58 | |
| Power supply current, stop mode | ICC | 0.6 | 3 | µA | VCC = 2.2-2.7 V; stop mode, Topr = 25°C | 58 | |
| XIN input cycle time | tc(XIN) | 50 | ns | VCC = 5 V | 51 | ||
| XIN input cycle time | tc(XIN) | 100 | ns | VCC = 3 V | 55 | ||
| XIN input cycle time | tc(XIN) | 200 | ns | VCC = 2.2 V | 59 | ||
| XCIN input cycle time | tc(XCIN) | 14 | µs | VCC = 5 V | 51 |
CAD (KiCad official)
- Symbol:
R5F212A7SNFA#V2 - Footprint:
Package_QFP:LQFP-64_14x14mm_P0.8mm - 3D model: LQFP-64(14x14) (KiCad packages3D, STEP)
- 3D model files:
r5f212a7snfa-v2-etched.step/r5f212a7snfa-v2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f212a7snfa-v2.step/r5f212a7snfa-v2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (66 pp, sha256
8267f44fac2727ab, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).