main
Ray
Publish 0.1.0
956cddb
R2A20134SP#W5
RENESAS · LED Drivers · SOIC-8
R2A20134SP#W5 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Error amplifier input terminal; voltage range -0.3 to +5 V with a 0.605 V typical feedback threshold. |
| 2 | COMP | output | Error amplifier output terminal, clamped at 4.10 V typical upper level. |
| 3 | RT | bidirectional | Resistor connection terminal for RAMP current setting; Rrt to GND selects zero current detection mode and Rrt to VREF selects fixed frequency mode. |
| 4 | VREF | power_out | Reference voltage output terminal, 5.02 V typical, with up to -5 mA terminal current. |
| 5 | CS | input | Zero current detection and overcurrent detection input terminal; voltage range -0.3 to +5 V, OCP threshold 0.6 V typical. |
| 6 | GND | power_in | Ground terminal, reference for all rated voltages. |
| 7 | OUT | output | Power MOSFET drive terminal with 0.9 A peak sink and 0.50 A peak source current and 100 mA/50 mA DC sink/source ratings. |
| 8 | VCC | power_in | Supply voltage terminal, -0.3 to +24 V absolute maximum, with UVLO turn-on at 12 V and turn-off at 9.2 V typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| UVLO turn-on threshold | Vuvlh | 11.2 | 12 | 12.8 | V | 5 | |
| UVLO turn-off threshold | Vuvll | 8.5 | 9.2 | 9.9 | V | 5 | |
| UVLO hysteresis | Hysuvl | 2.1 | 2.8 | 3.5 | V | 5 | |
| Standby current | Istby | 130 | 250 | μA | VCC = Vuvlh, 0.2 V | 5 | |
| Operating current | Icc | 2.2 | 3.3 | mA | 5 | ||
| Reference voltage | Vref | 4.945 | 5.02 | 5.095 | V | Isource = 0 mA | 5 |
| Line regulation | Vref-line | 5 | 20 | mV | Isource = 0 mA, Vcc = 10 V to 24 V | 5 | |
| Load regulation | Vref-load | 5 | 20 | mV | Isource = 0 mA to -5 mA | 5 | |
| Feedback voltage | Vfb | 0.587 | 0.605 | 0.623 | V | 5 | |
| Input bias current (FB) | Ifb | -0.75 | -0.25 | -0.1 | μA | Measured pin: FB | 5 |
| Upper clamp voltage | Vclamp_comp | 3.85 | 4.1 | 4.3 | V | FB = 0.3 V, COMP: Open | 5 |
| Low voltage (COMP) | Vl-comp | 0.1 | 0.3 | V | FB = 0.9 V, COMP: Open | 5 | |
| Source current (COMP) | Isrc-comp | -13 | -9.5 | -6 | μA | FB = 0.3 V, COMP: 2.5 V | 5 |
| Sink current (COMP) | Isnk-comp | 6 | 9.5 | 13 | μA | FB = 0.9 V, COMP: 2.5 V | 5 |
| Transconductance | gm | 25 | 45 | 70 | μs | FB = 0.55 V ↔ 0.65 V, COMP: 2.5 V | 5 |
| RAMP amplitude | dVramp | 2.9 | 3.1 | 3.3 | V | *2 | 5 |
| RT voltage1 | V-rt1 | 1.9 | 2 | 2.1 | V | RT-GND: 200 kΩ | 5 |
| RT voltage2 | V-rt2 | 2.9 | 3 | 3.1 | V | RT-Vref: 200 kΩ | 5 |
| ZCD threshold voltage | Vzcd | 7 | 13 | 19 | mV | 5 | |
| Input bias current (CS) | Ics | -85 | -53 | -25 | μA | Vcs = 13 mV | 5 |
| Restart time delay | Tstart | 45 | 75 | 140 | μs | FB = 0.3 V, COMP = 2.5 V | 5 |
| Rise time | tr-out | 30 | 100 | ns | CL = 1000 pF, FB = 0.3 V, COMP = 2.5 V | 6 | |
| Fall time | tf-out | 30 | 100 | ns | CL = 1000 pF, FB = 0.3 V, COMP = 2.5 V | 6 | |
| OUT low voltage 1 | Vol1-out | 0.08 | 0.2 | V | Isink = 20 mA | 6 | |
| OUT low voltage 2 | Vol2-out | 0.05 | 0.7 | V | Isink = 10 mA, VCC = 5 V | 6 | |
| OUT high voltage | Voh-out | 14.5 | 14.8 | V | Isource = -20 mA *1 | 6 | |
| OUT frequency | fout | 43 | 48 | 53 | kHz | RT-Vref: 200 kΩ *3 | 6 |
| Maximum duty cycle | Dmax | 47 | 52 | 57 | % | RT-Vref: 200 kΩ | 6 |
| OCP threshold voltage | Vocp | 0.57 | 0.6 | 0.63 | V | 6 | |
| OCP blanking time | tblank | 170 | 300 | 450 | ns | 6 | |
| Reference voltage temperature stability | dVref | 80 | ppm/°C | Tj = -40 to 150°C *1 (printed ±80) | 5 | ||
| Power supply voltage | VCC | -0.3 | 24 | V | Ta = 25°C | 4 | |
| OUT terminal peak current (sink) | Ipk-snk-out | 0.9 | A | Transient current when driving capacitive load | 4 | ||
| OUT terminal peak current (source) | Ipk-src-out | -0.5 | A | Transient current when driving capacitive load | 4 | ||
| OUT terminal DC current (sink) | Idc-snk-out | 100 | mA | Ta = 25°C | 4 | ||
| OUT terminal DC current (source) | Idc-src-out | -50 | mA | Ta = 25°C | 4 | ||
| RT terminal current | Irt | -200 | μA | Ta = 25°C | 4 | ||
| VREF terminal current | Iref | -5 | mA | Ta = 25°C | 4 | ||
| Vref terminal voltage | Vt-ref | -0.3 | 0.3 | V | Printed -0.3 to Vref + 0.3 V | 4 | |
| FB terminal voltage | Vt-fb | -0.3 | 5 | V | Ta = 25°C | 4 | |
| CS terminal voltage | Vcs | -0.3 | 5 | V | Ta = 25°C | 4 | |
| Power dissipation | Pt | 0.68 | W | Mounted on 40 × 40 × 1.6 mm glass epoxy board, wiring density 10% | 4 | ||
| Operating ambient temperature | Ta-opr | -40 | 125 | °C | 4 | ||
| Junction temperature | Tj | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Thermal resistance junction to ambient | θja | 120 | °C/W | Mounted on 40 × 40 × 1.6 mm glass epoxy board, wiring density 10% | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | Terminal cross section (Ni/Pd/Au plating) | 10 |
CAD (KiCad official)
- Symbol:
R2A20134SP#W5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
r2a20134sp-w5-etched.step/r2a20134sp-w5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r2a20134sp-w5.step/r2a20134sp-w5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (11 pp, sha256
1032656eb2a998c7, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R2A20134SP#W5
**RENESAS** · LED Drivers · SOIC-8
R2A20134SP#W5 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Error amplifier input terminal; voltage range -0.3 to +5 V with a 0.605 V typical feedback threshold. |
| 2 | COMP | output | Error amplifier output terminal, clamped at 4.10 V typical upper level. |
| 3 | RT | bidirectional | Resistor connection terminal for RAMP current setting; Rrt to GND selects zero current detection mode and Rrt to VREF selects fixed frequency mode. |
| 4 | VREF | power_out | Reference voltage output terminal, 5.02 V typical, with up to -5 mA terminal current. |
| 5 | CS | input | Zero current detection and overcurrent detection input terminal; voltage range -0.3 to +5 V, OCP threshold 0.6 V typical. |
| 6 | GND | power_in | Ground terminal, reference for all rated voltages. |
| 7 | OUT | output | Power MOSFET drive terminal with 0.9 A peak sink and 0.50 A peak source current and 100 mA/50 mA DC sink/source ratings. |
| 8 | VCC | power_in | Supply voltage terminal, -0.3 to +24 V absolute maximum, with UVLO turn-on at 12 V and turn-off at 9.2 V typical. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| UVLO turn-on threshold | Vuvlh | 11.2 | 12 | 12.8 | V | | 5 |
| UVLO turn-off threshold | Vuvll | 8.5 | 9.2 | 9.9 | V | | 5 |
| UVLO hysteresis | Hysuvl | 2.1 | 2.8 | 3.5 | V | | 5 |
| Standby current | Istby | | 130 | 250 | μA | VCC = Vuvlh, 0.2 V | 5 |
| Operating current | Icc | | 2.2 | 3.3 | mA | | 5 |
| Reference voltage | Vref | 4.945 | 5.02 | 5.095 | V | Isource = 0 mA | 5 |
| Line regulation | Vref-line | | 5 | 20 | mV | Isource = 0 mA, Vcc = 10 V to 24 V | 5 |
| Load regulation | Vref-load | | 5 | 20 | mV | Isource = 0 mA to -5 mA | 5 |
| Feedback voltage | Vfb | 0.587 | 0.605 | 0.623 | V | | 5 |
| Input bias current (FB) | Ifb | -0.75 | -0.25 | -0.1 | μA | Measured pin: FB | 5 |
| Upper clamp voltage | Vclamp_comp | 3.85 | 4.1 | 4.3 | V | FB = 0.3 V, COMP: Open | 5 |
| Low voltage (COMP) | Vl-comp | | 0.1 | 0.3 | V | FB = 0.9 V, COMP: Open | 5 |
| Source current (COMP) | Isrc-comp | -13 | -9.5 | -6 | μA | FB = 0.3 V, COMP: 2.5 V | 5 |
| Sink current (COMP) | Isnk-comp | 6 | 9.5 | 13 | μA | FB = 0.9 V, COMP: 2.5 V | 5 |
| Transconductance | gm | 25 | 45 | 70 | μs | FB = 0.55 V ↔ 0.65 V, COMP: 2.5 V | 5 |
| RAMP amplitude | dVramp | 2.9 | 3.1 | 3.3 | V | *2 | 5 |
| RT voltage1 | V-rt1 | 1.9 | 2 | 2.1 | V | RT-GND: 200 kΩ | 5 |
| RT voltage2 | V-rt2 | 2.9 | 3 | 3.1 | V | RT-Vref: 200 kΩ | 5 |
| ZCD threshold voltage | Vzcd | 7 | 13 | 19 | mV | | 5 |
| Input bias current (CS) | Ics | -85 | -53 | -25 | μA | Vcs = 13 mV | 5 |
| Restart time delay | Tstart | 45 | 75 | 140 | μs | FB = 0.3 V, COMP = 2.5 V | 5 |
| Rise time | tr-out | | 30 | 100 | ns | CL = 1000 pF, FB = 0.3 V, COMP = 2.5 V | 6 |
| Fall time | tf-out | | 30 | 100 | ns | CL = 1000 pF, FB = 0.3 V, COMP = 2.5 V | 6 |
| OUT low voltage 1 | Vol1-out | | 0.08 | 0.2 | V | Isink = 20 mA | 6 |
| OUT low voltage 2 | Vol2-out | | 0.05 | 0.7 | V | Isink = 10 mA, VCC = 5 V | 6 |
| OUT high voltage | Voh-out | 14.5 | 14.8 | | V | Isource = -20 mA *1 | 6 |
| OUT frequency | fout | 43 | 48 | 53 | kHz | RT-Vref: 200 kΩ *3 | 6 |
| Maximum duty cycle | Dmax | 47 | 52 | 57 | % | RT-Vref: 200 kΩ | 6 |
| OCP threshold voltage | Vocp | 0.57 | 0.6 | 0.63 | V | | 6 |
| OCP blanking time | tblank | 170 | 300 | 450 | ns | | 6 |
| Reference voltage temperature stability | dVref | | 80 | | ppm/°C | Tj = -40 to 150°C *1 (printed ±80) | 5 |
| Power supply voltage | VCC | -0.3 | | 24 | V | Ta = 25°C | 4 |
| OUT terminal peak current (sink) | Ipk-snk-out | | | 0.9 | A | Transient current when driving capacitive load | 4 |
| OUT terminal peak current (source) | Ipk-src-out | -0.5 | | | A | Transient current when driving capacitive load | 4 |
| OUT terminal DC current (sink) | Idc-snk-out | | | 100 | mA | Ta = 25°C | 4 |
| OUT terminal DC current (source) | Idc-src-out | -50 | | | mA | Ta = 25°C | 4 |
| RT terminal current | Irt | -200 | | | μA | Ta = 25°C | 4 |
| VREF terminal current | Iref | -5 | | | mA | Ta = 25°C | 4 |
| Vref terminal voltage | Vt-ref | -0.3 | | 0.3 | V | Printed -0.3 to Vref + 0.3 V | 4 |
| FB terminal voltage | Vt-fb | -0.3 | | 5 | V | Ta = 25°C | 4 |
| CS terminal voltage | Vcs | -0.3 | | 5 | V | Ta = 25°C | 4 |
| Power dissipation | Pt | | | 0.68 | W | Mounted on 40 × 40 × 1.6 mm glass epoxy board, wiring density 10% | 4 |
| Operating ambient temperature | Ta-opr | -40 | | 125 | °C | | 4 |
| Junction temperature | Tj | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Thermal resistance junction to ambient | θja | | 120 | | °C/W | Mounted on 40 × 40 × 1.6 mm glass epoxy board, wiring density 10% | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | gold | Terminal cross section (Ni/Pd/Au plating) | 10 |
## CAD (KiCad official)
- Symbol: `R2A20134SP#W5`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `r2a20134sp-w5-etched.step` / `r2a20134sp-w5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r2a20134sp-w5.step` / `r2a20134sp-w5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/r2a20134sp-w5-datasheet.pdf) (11 pp, sha256 `1032656eb2a998c7`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r2a20134sp-w5-datasheet.pdf)