Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R2A20134SP#W5

RENESAS · LED Drivers · SOIC-8

R2A20134SP#W5 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Error amplifier input terminal; voltage range -0.3 to +5 V with a 0.605 V typical feedback threshold.
2 COMP output Error amplifier output terminal, clamped at 4.10 V typical upper level.
3 RT bidirectional Resistor connection terminal for RAMP current setting; Rrt to GND selects zero current detection mode and Rrt to VREF selects fixed frequency mode.
4 VREF power_out Reference voltage output terminal, 5.02 V typical, with up to -5 mA terminal current.
5 CS input Zero current detection and overcurrent detection input terminal; voltage range -0.3 to +5 V, OCP threshold 0.6 V typical.
6 GND power_in Ground terminal, reference for all rated voltages.
7 OUT output Power MOSFET drive terminal with 0.9 A peak sink and 0.50 A peak source current and 100 mA/50 mA DC sink/source ratings.
8 VCC power_in Supply voltage terminal, -0.3 to +24 V absolute maximum, with UVLO turn-on at 12 V and turn-off at 9.2 V typical.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Display Modules / LED Drivers / Display Drivers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
UVLO turn-on threshold Vuvlh 11.2 12 12.8 V 5
UVLO turn-off threshold Vuvll 8.5 9.2 9.9 V 5
UVLO hysteresis Hysuvl 2.1 2.8 3.5 V 5
Standby current Istby 130 250 μA VCC = Vuvlh, 0.2 V 5
Operating current Icc 2.2 3.3 mA 5
Reference voltage Vref 4.945 5.02 5.095 V Isource = 0 mA 5
Line regulation Vref-line 5 20 mV Isource = 0 mA, Vcc = 10 V to 24 V 5
Load regulation Vref-load 5 20 mV Isource = 0 mA to -5 mA 5
Feedback voltage Vfb 0.587 0.605 0.623 V 5
Input bias current (FB) Ifb -0.75 -0.25 -0.1 μA Measured pin: FB 5
Upper clamp voltage Vclamp_comp 3.85 4.1 4.3 V FB = 0.3 V, COMP: Open 5
Low voltage (COMP) Vl-comp 0.1 0.3 V FB = 0.9 V, COMP: Open 5
Source current (COMP) Isrc-comp -13 -9.5 -6 μA FB = 0.3 V, COMP: 2.5 V 5
Sink current (COMP) Isnk-comp 6 9.5 13 μA FB = 0.9 V, COMP: 2.5 V 5
Transconductance gm 25 45 70 μs FB = 0.55 V ↔ 0.65 V, COMP: 2.5 V 5
RAMP amplitude dVramp 2.9 3.1 3.3 V *2 5
RT voltage1 V-rt1 1.9 2 2.1 V RT-GND: 200 kΩ 5
RT voltage2 V-rt2 2.9 3 3.1 V RT-Vref: 200 kΩ 5
ZCD threshold voltage Vzcd 7 13 19 mV 5
Input bias current (CS) Ics -85 -53 -25 μA Vcs = 13 mV 5
Restart time delay Tstart 45 75 140 μs FB = 0.3 V, COMP = 2.5 V 5
Rise time tr-out 30 100 ns CL = 1000 pF, FB = 0.3 V, COMP = 2.5 V 6
Fall time tf-out 30 100 ns CL = 1000 pF, FB = 0.3 V, COMP = 2.5 V 6
OUT low voltage 1 Vol1-out 0.08 0.2 V Isink = 20 mA 6
OUT low voltage 2 Vol2-out 0.05 0.7 V Isink = 10 mA, VCC = 5 V 6
OUT high voltage Voh-out 14.5 14.8 V Isource = -20 mA *1 6
OUT frequency fout 43 48 53 kHz RT-Vref: 200 kΩ *3 6
Maximum duty cycle Dmax 47 52 57 % RT-Vref: 200 kΩ 6
OCP threshold voltage Vocp 0.57 0.6 0.63 V 6
OCP blanking time tblank 170 300 450 ns 6
Reference voltage temperature stability dVref 80 ppm/°C Tj = -40 to 150°C *1 (printed ±80) 5
Power supply voltage VCC -0.3 24 V Ta = 25°C 4
OUT terminal peak current (sink) Ipk-snk-out 0.9 A Transient current when driving capacitive load 4
OUT terminal peak current (source) Ipk-src-out -0.5 A Transient current when driving capacitive load 4
OUT terminal DC current (sink) Idc-snk-out 100 mA Ta = 25°C 4
OUT terminal DC current (source) Idc-src-out -50 mA Ta = 25°C 4
RT terminal current Irt -200 μA Ta = 25°C 4
VREF terminal current Iref -5 mA Ta = 25°C 4
Vref terminal voltage Vt-ref -0.3 0.3 V Printed -0.3 to Vref + 0.3 V 4
FB terminal voltage Vt-fb -0.3 5 V Ta = 25°C 4
CS terminal voltage Vcs -0.3 5 V Ta = 25°C 4
Power dissipation Pt 0.68 W Mounted on 40 × 40 × 1.6 mm glass epoxy board, wiring density 10% 4
Operating ambient temperature Ta-opr -40 125 °C 4
Junction temperature Tj -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Thermal resistance junction to ambient θja 120 °C/W Mounted on 40 × 40 × 1.6 mm glass epoxy board, wiring density 10% 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts gold Terminal cross section (Ni/Pd/Au plating) 10

CAD (KiCad official)

  • Symbol: R2A20134SP#W5
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: r2a20134sp-w5-etched.step / r2a20134sp-w5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r2a20134sp-w5.step / r2a20134sp-w5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (11 pp, sha256 1032656eb2a998c7, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF