b21154a
QCPL-7847-500E
Broadcom AVAGO · Operational Amplifier · DIP-8-300mil
QCPL-7847-500E from Broadcom AVAGO, in a DIP-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf. The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Input-side supply voltage, 4.5 V to 5.5 V. Requires a 0.1 µF bypass capacitor between pins 1 and 4. |
| 2 | VIN+ | input | Non-inverting analog input of the isolation amplifier. Recommended linear input range ±200 mV (functional ±2 V); typically connected across a current-sense shunt resistor. |
| 3 | VIN- | input | Inverting analog input of the isolation amplifier. Recommended linear input range ±200 mV (functional ±2 V); typically tied to the low side of the current-sense shunt / GND1 in single-ended sensing. |
| 4 | GND1 | power_in | Input-side (isolated) ground reference for VDD1 and the analog inputs. |
| 5 | GND2 | power_in | Output-side ground reference for VDD2 and the differential outputs. |
| 6 | VOUT- | output | Inverting analog output of the isolated differential output pair. Differential (VOUT+ − VOUT-) is proportional to the input differential voltage across the isolation barrier. |
| 7 | VOUT+ | output | Non-inverting analog output of the isolated differential output pair. Typically converted to single-ended by an external op-amp per the recommended application circuit. |
| 8 | VDD2 | power_in | Output-side supply voltage, 4.5 V to 5.5 V. Requires a 0.1 µF bypass capacitor between pins 5 and 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | DIP-8-300mil |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
QCPL-7847-500EQCPL-7847-500E-300EQCPL-7847-500E-000E
CAD (Adom-generated)
- Symbol:
QCPL-7847-500E - Footprint:
Adom_Gen:Broadcom_AVAGO_QCPL-784_bcfd83 - 3D model: generated to fit the land (STEP)
- 3D model files:
qcpl-7847-500e-etched.step/qcpl-7847-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);qcpl-7847-500e.step/qcpl-7847-500e.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
qcpl-7847-500e.step |
271 KB | You want the bare part, or you mark your own boards. |
qcpl-7847-500e-etched.step |
2.5 MB | You want the part with QCPL-7847-500E already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 606 faces against 148 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (18 pp, sha256
43bfeec4a87fb237, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# QCPL-7847-500E
**Broadcom AVAGO** · Operational Amplifier · DIP-8-300mil
QCPL-7847-500E from Broadcom AVAGO, in a DIP-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf. The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Input-side supply voltage, 4.5 V to 5.5 V. Requires a 0.1 µF bypass capacitor between pins 1 and 4. |
| 2 | VIN+ | input | Non-inverting analog input of the isolation amplifier. Recommended linear input range ±200 mV (functional ±2 V); typically connected across a current-sense shunt resistor. |
| 3 | VIN- | input | Inverting analog input of the isolation amplifier. Recommended linear input range ±200 mV (functional ±2 V); typically tied to the low side of the current-sense shunt / GND1 in single-ended sensing. |
| 4 | GND1 | power_in | Input-side (isolated) ground reference for VDD1 and the analog inputs. |
| 5 | GND2 | power_in | Output-side ground reference for VDD2 and the differential outputs. |
| 6 | VOUT- | output | Inverting analog output of the isolated differential output pair. Differential (VOUT+ − VOUT-) is proportional to the input differential voltage across the isolation barrier. |
| 7 | VOUT+ | output | Non-inverting analog output of the isolated differential output pair. Typically converted to single-ended by an external op-amp per the recommended application circuit. |
| 8 | VDD2 | power_in | Output-side supply voltage, 4.5 V to 5.5 V. Requires a 0.1 µF bypass capacitor between pins 5 and 8. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | DIP-8-300mil |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `QCPL-7847-500E`
- `QCPL-7847-500E-300E`
- `QCPL-7847-500E-000E`
## CAD (Adom-generated)
- Symbol: `QCPL-7847-500E`
- Footprint: `Adom_Gen:Broadcom_AVAGO_QCPL-784_bcfd83`
- 3D model: generated to fit the land (STEP)
- 3D model files: `qcpl-7847-500e-etched.step` / `qcpl-7847-500e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `qcpl-7847-500e.step` / `qcpl-7847-500e.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`qcpl-7847-500e.step`](qcpl-7847-500e.step) | 271 KB | You want the bare part, or you mark your own boards. |
| [`qcpl-7847-500e-etched.step`](qcpl-7847-500e-etched.step) | 2.5 MB | You want the part with `QCPL-7847-500E` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 606 faces against 148 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Broadcom AVAGO datasheet](docs/qcpl-7847-500e-datasheet.pdf) (18 pp, sha256 `43bfeec4a87fb237`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/qcpl-7847-500e-datasheet.pdf)