main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs qcpl-7847-500e: restore the declared datasheet (Broadcom QCPL-7847, sha 43bfeec4) · Ray
viewers regenerate the viewers (viewers/footprint.html, viewers/symbol.html were placeholder stubs, so the page had no working… · Ray
package.json Publish 0.2.4 · Ray
pads.json regenerate the viewers (viewers/footprint.html, viewers/symbol.html were placeholder stubs, so the page had no working… · Ray
page.json Publish 0.2.4 · Ray
qcpl-7847-500e-etched.fit.json qcpl-7847-500e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
qcpl-7847-500e-etched.glb qcpl-7847-500e: footprint re-picked to Broadcom_AVAGO_QCPL-784_bcfd83 from the maker drawing · Ray
qcpl-7847-500e-etched.step qcpl-7847-500e: footprint re-picked to Broadcom_AVAGO_QCPL-784_bcfd83 from the maker drawing · Ray
qcpl-7847-500e-hero.glb Publish 0.2.3 · Ray
qcpl-7847-500e-hero.overlay.json Publish 0.2.3 · Ray
qcpl-7847-500e.glb qcpl-7847-500e: footprint re-picked to Broadcom_AVAGO_QCPL-784_bcfd83 from the maker drawing · Ray
qcpl-7847-500e.kicad_mod qcpl-7847-500e: footprint re-picked to Broadcom_AVAGO_QCPL-784_bcfd83 from the maker drawing · Ray
qcpl-7847-500e.kicad_sym Publish 0.1.0 · Ray
qcpl-7847-500e.lbr qcpl-7847-500e: footprint re-picked to Broadcom_AVAGO_QCPL-784_bcfd83 from the maker drawing · Ray
qcpl-7847-500e.step qcpl-7847-500e: footprint re-picked to Broadcom_AVAGO_QCPL-784_bcfd83 from the maker drawing · Ray
README.md qcpl-7847-500e: CAD wording names the Adom_Gen land, not KiCad official · Ray

QCPL-7847-500E

Broadcom AVAGO · Operational Amplifier · DIP-8-300mil

QCPL-7847-500E from Broadcom AVAGO, in a DIP-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf. The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VDD1 power_in Input-side supply voltage, 4.5 V to 5.5 V. Requires a 0.1 µF bypass capacitor between pins 1 and 4.
2 VIN+ input Non-inverting analog input of the isolation amplifier. Recommended linear input range ±200 mV (functional ±2 V); typically connected across a current-sense shunt resistor.
3 VIN- input Inverting analog input of the isolation amplifier. Recommended linear input range ±200 mV (functional ±2 V); typically tied to the low side of the current-sense shunt / GND1 in single-ended sensing.
4 GND1 power_in Input-side (isolated) ground reference for VDD1 and the analog inputs.
5 GND2 power_in Output-side ground reference for VDD2 and the differential outputs.
6 VOUT- output Inverting analog output of the isolated differential output pair. Differential (VOUT+ − VOUT-) is proportional to the input differential voltage across the isolation barrier.
7 VOUT+ output Non-inverting analog output of the isolated differential output pair. Typically converted to single-ended by an external op-amp per the recommended application circuit.
8 VDD2 power_in Output-side supply voltage, 4.5 V to 5.5 V. Requires a 0.1 µF bypass capacitor between pins 5 and 8.

Key specifications

Parameter Value
Manufacturer Broadcom AVAGO
Package DIP-8-300mil
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • QCPL-7847-500E
  • QCPL-7847-500E-300E
  • QCPL-7847-500E-000E

CAD (Adom-generated)

  • Symbol: QCPL-7847-500E
  • Footprint: Adom_Gen:Broadcom_AVAGO_QCPL-784_bcfd83
  • 3D model: generated to fit the land (STEP)
  • 3D model files: qcpl-7847-500e-etched.step / qcpl-7847-500e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); qcpl-7847-500e.step / qcpl-7847-500e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
qcpl-7847-500e.step 271 KB You want the bare part, or you mark your own boards.
qcpl-7847-500e-etched.step 2.5 MB You want the part with QCPL-7847-500E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 606 faces against 148 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom AVAGO datasheet (18 pp, sha256 43bfeec4a87fb237, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF