PY25Q128HA-SUH-IT

{
  "slug": "py25q128ha-suh-it",
  "version": "0.1.0",
  "type": "component",
  "description": "PUYA） NOR FLASH, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "py25q128ha-suh-it",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "py25q128ha-suh-it.kicad_sym",
    "py25q128ha-suh-it.kicad_mod",
    "py25q128ha-suh-it.glb",
    "py25q128ha-suh-it.step",
    "py25q128ha-suh-it.lbr",
    "docs/hero.png",
    "docs/py25q128ha-suh-it-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "py25q128ha-suh-it-hero.glb",
    "py25q128ha-suh-it-hero.overlay.json",
    "py25q128ha-suh-it-etched.glb"
  ],
  "component": {
    "mpn": "PY25Q128HA-SUH-IT",
    "manufacturer": "PUYA）",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904337923325952",
    "parts": {
      "symbol": "py25q128ha-suh-it.kicad_sym",
      "footprint": "py25q128ha-suh-it.kicad_mod",
      "model_3d": "py25q128ha-suh-it-hero.glb",
      "model_3d_plain": "py25q128ha-suh-it-etched.glb",
      "model_3d_step": "py25q128ha-suh-it-etched.step",
      "model_3d_step_plain": "py25q128ha-suh-it.step",
      "lbr": "py25q128ha-suh-it.lbr"
    },
    "distributor_links": {
      "lcsc": "C7419750"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T09:03:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip select input for the device (active low, per the ordering and interface description; the datasheet lists it as 'Chip select')."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "bidirectional",
        "description": "Serial data output for 1 x I/O; also serves as SIO1, a serial data input and output for the 4 x I/O read mode."
      },
      {
        "number": "3",
        "name": "WP#",
        "type": "bidirectional",
        "description": "Write protection, active low; also serves as SIO2 for the 4 x I/O read mode, and the WP# function is only available for Standard/Dual SPI."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground of the device."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "bidirectional",
        "description": "Serial data input for 1 x I/O; also serves as SIO0, a serial data input and output for the 4 x I/O read mode."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock input."
      },
      {
        "number": "7",
        "name": "HOLD#/RESET#",
        "type": "bidirectional",
        "description": "Pauses the device without deselecting it (HOLD#) or acts as hardware reset (RESET#, active low, minimum 1 us) depending on the HOLD/RST configure bit; also serves as SIO3 for the 4 x I/O read mode."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply of the device, specified from 2.7 V to 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 1 description is limited to the datasheet's 'Chip select' label; the datasheet does not spell ou; The datasheet gives one pin table for SOP8 covering both 150mil (SS) and 208mil (SU) packages; no se; Pin types for SO, SI, WP#, and HOLD#/RESET# are shown as bidirectional because the datasheet defines"
        ],
        "pages_sent": 27,
        "cost_usd": 0.0772,
        "at": "2026-10-17T09:03:00"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904337923325952",
        "pages": 109,
        "sha256": "7c517dc149feb529",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "py25q128ha-suh-it.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "py25q128ha-suh-it-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "35b611f6124de91eb01a89d459aa4b87be0cfa2602eb17c1b4cf8cc9016eaa68",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}