PTH12050WAD

{
  "slug": "pth12050wad",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Modules, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "pth12050wad",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pth12050wad.kicad_sym",
    "pth12050wad.kicad_mod",
    "pth12050wad.glb",
    "pth12050wad.step",
    "pth12050wad.lbr",
    "docs/hero.png",
    "docs/pth12050wad-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pth12050wad-hero.glb",
    "pth12050wad-hero.overlay.json",
    "pth12050wad-etched.glb"
  ],
  "component": {
    "mpn": "PTH12050WAD",
    "manufacturer": "Texas Instruments",
    "package": "DIP-6",
    "pin_count": 6,
    "category": "Power Supply Chip",
    "subcategory": "Power Modules",
    "datasheet": "https://www.ti.com/lit/ds/symlink/pth12050wad.pdf",
    "parts": {
      "symbol": "pth12050wad.kicad_sym",
      "footprint": "pth12050wad.kicad_mod",
      "model_3d": "pth12050wad-hero.glb",
      "model_3d_plain": "pth12050wad-etched.glb",
      "model_3d_step": "pth12050wad-etched.step",
      "model_3d_step_plain": "pth12050wad.step",
      "lbr": "pth12050wad.lbr"
    },
    "distributor_links": {
      "lcsc": "C2879232",
      "digikey": "296-26314-ND",
      "mouser": "595-PTH12050WAD"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T17:20:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-26314-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-PTH12050WAD",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Common ground connection for the VI and VO power connections and the 0-VDC reference for the control inputs."
      },
      {
        "number": "2",
        "name": "Track",
        "type": "input",
        "description": "Analog input that lets the output follow an external voltage volt-for-volt from 0 V up to the set-point, becomes active typically 20 ms after VI is applied, and should be connected to VI if unused."
      },
      {
        "number": "3",
        "name": "VI",
        "type": "power_in",
        "description": "Positive input voltage power node referenced to GND, with a 10.8 V to 13.2 V input range over the IO range and undervoltage lockout between 8.8 V and 10.4 V."
      },
      {
        "number": "4",
        "name": "Inhibit",
        "type": "input",
        "description": "Open-collector/drain negative-logic input referenced to GND that disables the output when driven low (VIL −0.2 V to 0.5 V), and must not have an external pull-up."
      },
      {
        "number": "5",
        "name": "VO Adjust",
        "type": "passive",
        "description": "A 1% resistor (100 ppm/°C or better) connected directly between this pin and GND (pin 1) sets the output voltage above its lowest value, with the set-point range 1.2 V to 5.5 V for W-suffix devices and 0.8 V to 1.8 V for L-suffix devices, and an open circuit defaulting to the lowest value."
      },
      {
        "number": "6",
        "name": "VO",
        "type": "power_out",
        "description": "Regulated positive power output referenced to GND, adjustable over 1.2 V to 5.5 V for W-suffix devices with output current up to 6 A."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers the through-hole and surface-mount variants of the PTH12050W/L family with one ; Pin 5 is printed as 'VOAdjust' in the extracted text; it is shown here as 'VO Adjust'. Pin 5 type se"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0528,
        "at": "2026-10-30T17:20:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/pth12050wad.pdf",
        "pages": 26,
        "sha256": "499b9c729705c05e",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pth12050wad.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          7.05,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a4460ddeadf04a1914d6bacbeb5b59d684aa99d513b0a3b223dbfdd0c77830c1",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pth12050wad-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          7.05,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d7645ced8d0c0d3e3e105bbad0ed21106fd394ef1e9c6ba8cca30eedfa4cb342",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}