main
Ray Publish 0.1.0 63800a6
{
  "slug": "ptd08a015wad",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Power Modules, DIP-12. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power modules",
    "ptd08a015wad",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ptd08a015wad.kicad_sym",
    "ptd08a015wad.kicad_mod",
    "ptd08a015wad.glb",
    "ptd08a015wad.step",
    "ptd08a015wad.lbr",
    "docs/hero.png",
    "docs/ptd08a015wad-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ptd08a015wad-hero.glb",
    "ptd08a015wad-hero.overlay.json"
  ],
  "component": {
    "mpn": "PTD08A015WAD",
    "manufacturer": "Texas Instruments",
    "package": "DIP-12",
    "pin_count": 12,
    "category": "Power Modules",
    "subcategory": "DC-DC Power Modules",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ptd08a015w",
    "parts": {
      "symbol": "ptd08a015wad.kicad_sym",
      "footprint": "ptd08a015wad.kicad_mod",
      "model_3d": "ptd08a015wad-hero.glb",
      "model_3d_plain": "ptd08a015wad.glb",
      "model_3d_step": "ptd08a015wad-etched.step",
      "model_3d_step_plain": "ptd08a015wad.step",
      "lbr": "ptd08a015wad.lbr"
    },
    "distributor_links": {
      "lcsc": "C2861934",
      "digikey": "296-25492-ND",
      "mouser": "595-PTD08A015WAD"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T22:39:13Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-25492-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-PTD08A015WAD",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VI",
        "type": "power_in",
        "description": "The positive input voltage power node to the module, referenced to common GND, with an input range of 4.75 V to 14 V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "This is the common ground connection for the VI and VO power connections."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "This is the common ground connection for the VI and VO power connections."
      },
      {
        "number": "4",
        "name": "VO",
        "type": "power_out",
        "description": "The regulated positive power output with respect to GND, adjustable from 0.7 V to 3.6 V."
      },
      {
        "number": "5",
        "name": "TEMP",
        "type": "output",
        "description": "Temperature sense output whose voltage level represents the module temperature."
      },
      {
        "number": "6",
        "name": "IOUT",
        "type": "output",
        "description": "Current sense output whose voltage level represents the average output current of the module."
      },
      {
        "number": "7",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground return that is the 0 Vdc reference for the control inputs."
      },
      {
        "number": "8",
        "name": "INH",
        "type": "input",
        "description": "Negative-logic inhibit input referenced to AGND; a low level disables the module and turns off the output, and a 10 kΩ pull-up to 3.3 V or 5 V is required if INH is not used."
      },
      {
        "number": "9",
        "name": "FAULT",
        "type": "output",
        "description": "Current-limit flag that is a 3.3 V digital output, latched high after an over-current condition and reset after two complete PWM cycles without an over-current condition."
      },
      {
        "number": "10",
        "name": "SRE",
        "type": "input",
        "description": "High-impedance digital input accepting 3.3 V or 5 V logic that enables the synchronous rectifier; when high the module sources and sinks output current, and when low it only sources current."
      },
      {
        "number": "11",
        "name": "PWM",
        "type": "input",
        "description": "High-impedance digital PWM input that accepts 3.3 V or 5 V logic levels up to 1 MHz."
      },
      {
        "number": "12",
        "name": "VBIAS",
        "type": "power_in",
        "description": "Bias voltage supply required to power the internal circuitry, which should be connected to VI for optimal performance (bias range 4.75 V to 14 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not describe this package as DIP-12. The package addendum lists PTD08A015WAD as a; Pins 2 and 3 are both labeled GND in the terminal functions table. The pin numbers were read from th; Pin types are inferred from the function descriptions: TEMP, IOUT and FAULT are typed as output, SRE"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0717,
        "at": "2026-10-11T22:38:57"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ptd08a015w",
        "pages": 15,
        "sha256": "a37198b1e8d850bf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 12,
        "described": 12,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ptd08a015wad.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          15.24,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "d0d14c257dc175efde81c54c2e63e5477a3af152f96520f6884aa7b452ad9e53",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ptd08a015wad-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          15.24,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "ddc246c424a3a72b4eb1bac84ab80b13540ab860e9b76722ce49dc8f18cdd93b",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}