3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPTD08A015WAD
Texas Instruments · DC-DC Power Modules · DIP-12
PTD08A015WAD from Texas Instruments, in a DIP-12. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VI | power_in | The positive input voltage power node to the module, referenced to common GND, with an input range of 4.75 V to 14 V. |
| 2 | GND | power_in | This is the common ground connection for the VI and VO power connections. |
| 3 | GND | power_in | This is the common ground connection for the VI and VO power connections. |
| 4 | VO | power_out | The regulated positive power output with respect to GND, adjustable from 0.7 V to 3.6 V. |
| 5 | TEMP | output | Temperature sense output whose voltage level represents the module temperature. |
| 6 | IOUT | output | Current sense output whose voltage level represents the average output current of the module. |
| 7 | AGND | power_in | Analog ground return that is the 0 Vdc reference for the control inputs. |
| 8 | INH | input | Negative-logic inhibit input referenced to AGND; a low level disables the module and turns off the output, and a 10 kΩ pull-up to 3.3 V or 5 V is required if INH is not used. |
| 9 | FAULT | output | Current-limit flag that is a 3.3 V digital output, latched high after an over-current condition and reset after two complete PWM cycles without an over-current condition. |
| 10 | SRE | input | High-impedance digital input accepting 3.3 V or 5 V logic that enables the synchronous rectifier; when high the module sources and sinks output current, and when low it only sources current. |
| 11 | PWM | input | High-impedance digital PWM input that accepts 3.3 V or 5 V logic levels up to 1 MHz. |
| 12 | VBIAS | power_in | Bias voltage supply required to power the internal circuitry, which should be connected to VI for optimal performance (bias range 4.75 V to 14 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-12 |
| Category | Power Modules |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output current | IO | 0 | 15 | A | Over VO range; 25°C, natural convection | 4 | |
| Input voltage range | VI | 4.75 | 14 | V | Over IO range; max duty-cycle limited per footnote (1) | 4 | |
| Output voltage adjust range | VOADJ | 0.7 | 3.6 | V | Over IO range | 4 | |
| Bias voltage | VB | 4.75 | 14 | V | 4 | ||
| Bias voltage under voltage lockout (rising) | VB | 4.25 | 4.5 | 4.75 | V | VB increasing | 4 |
| Bias voltage under voltage lockout (falling) | VB | 4 | 4.25 | 4.5 | V | VB decreasing | 4 |
| High-level input voltage | VIH | 2 | 5.5 | V | SRE, INH, & PWM input levels | 4 | |
| PWM input frequency range | 300 | 1000 | kHz | PWM input | 4 | ||
| TEMP output range | -40 | 125 | °C | TEMP output | 4 | ||
| TEMP output accuracy | -4 | 6 | °C | -40°C ≤ TA ≤ 85°C | 4 | ||
| FAULT high-level output voltage | VOH | 2.7 | 3.3 | V | IFAULT = 4mA | 4 | |
| FAULT low-level output voltage | VOL | 0 | 0.6 | V | IFAULT = 4mA | 4 | |
| IOUT output range | 0.15 | 3.5 | V | IOUT output | 4 | ||
| IOUT output gain | 60 | 85 | 110 | mV/A | IOUT output | 4 | |
| IOUT output offset | 0.44 | 0.6 | 0.76 | V | IO = 0A, VO = 1.2V | 4 | |
| IOUT output impedance | 10 | 15 | 21 | kΩ | 4 | ||
| External output capacitance, nonceramic (maximum) | CO | 5000 | µF | Nonceramic; calculated max for 1 V/ms output rise time (footnote 4) | 4 | ||
| Equivalent series resistance, nonceramic output capacitance (minimum) | ESR | 1 | mΩ | Non-ceramic output capacitance; minimum ESR per footnote (5) | 4 | ||
| Input voltage | VI | 16 | V | Voltages with respect to GND | 3 | ||
| Bias voltage | VB | 16 | V | Voltages with respect to GND | 3 | ||
| Operating temperature range | TA | -40 | 85 | °C | Over VI range | 3 | |
| Storage temperature | Tstg | -55 | 125 | °C | 3 | ||
| Wave soldering temperature | Twave | 260 | °C | Surface temperature of module body or pins for 5 seconds | 3 |
CAD (KiCad official)
- Symbol:
PTD08A015WAD - Footprint:
Package_DIP:DIP-12_W7.62mm - 3D model: DIP-12 (KiCad packages3D, STEP)
- 3D model files:
ptd08a015wad-etched.step/ptd08a015wad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ptd08a015wad.step/ptd08a015wad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (15 pp, sha256
a37198b1e8d850bf, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).