main
Ray
Publish 0.1.0
d0e0fe2
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244
{
"slug": "pt7c433833uex",
"version": "0.1.0",
"type": "component",
"description": "Diodes Incorporated Real-time Clocks (RTC), MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"clock and timing",
"pt7c433833uex",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pt7c433833uex.kicad_sym",
"pt7c433833uex.kicad_mod",
"pt7c433833uex.glb",
"pt7c433833uex.step",
"pt7c433833uex.lbr",
"docs/hero.png",
"docs/pt7c433833uex-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pt7c433833uex-hero.glb",
"pt7c433833uex-hero.overlay.json",
"pt7c433833uex-etched.glb"
],
"component": {
"mpn": "PT7C433833UEX",
"manufacturer": "Diodes Incorporated",
"package": "MSOP-8",
"pin_count": 8,
"category": "Clock and Timing",
"subcategory": "Real-time Clocks (RTC)",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/2122e86eee9c40eee5d97ffd8e63f396.pdf",
"parts": {
"symbol": "pt7c433833uex.kicad_sym",
"footprint": "pt7c433833uex.kicad_mod",
"model_3d": "pt7c433833uex-hero.glb",
"model_3d_plain": "pt7c433833uex-etched.glb",
"model_3d_step": "pt7c433833uex-etched.step",
"model_3d_step_plain": "pt7c433833uex.step",
"lbr": "pt7c433833uex.lbr"
},
"distributor_links": {
"lcsc": "C500772",
"digikey": "31-PT7C433833UEXTR-ND",
"mouser": "729-PT7C433833UEX"
},
"distributor_check": {
"checked_at": "2026-10-28T22:45:28Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "31-PT7C433833UEXTR-ND",
"status": "found",
"lifecycle": "Obsolete"
},
"mouser": {
"pn": "729-PT7C433833UEX",
"status": "found",
"lifecycle": "Factory Special Order"
}
},
"pins": [
{
"number": "1",
"name": "X1",
"type": "input",
"description": "Input to the internal 32.768kHz oscillator, designed for a crystal with a specified load capacitance of 12.5pF, and can alternatively be driven by an external 32.768kHz oscillator."
},
{
"number": "2",
"name": "X2",
"type": "output",
"description": "Output of the internal 32.768kHz oscillator, which is left floating when an external oscillator is connected to X1."
},
{
"number": "3",
"name": "VBAT",
"type": "power_in",
"description": "Backup supply input for a standard 3V lithium cell or other energy source, which must be held between 1.5V and 3.7V for proper operation, or grounded if no backup is required."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device; all voltages are referenced to this pin."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial data input/output of the 2-wire I2C interface, which is open drain and requires an external pull-up resistor."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial clock input that synchronizes data movement on the I2C interface, with a maximum clock frequency of 400kHz."
},
{
"number": "7",
"name": "SQW/OUT",
"type": "output",
"description": "Open-drain square-wave output, selectable as 1Hz, 4.096kHz, 8.192kHz or 32.768kHz when enabled, that requires an external pull-up resistor and operates with either VCC or VBAT applied."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Primary supply pin with a recommended operating range of 2.7V to 5.5V; when a backup supply is connected and VCC falls below VPF, reads and writes are inhibited while timekeeping continues."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin table on page 2 is shared by the SOIC-8 and MSOP-8 variants and gives one numbering for the ; Pin types were mapped to KiCad classes: the datasheet lists X1 as I and X2 as O, SDA as I/O, and the"
],
"pages_sent": 17,
"cost_usd": 0.0823,
"at": "2026-10-28T22:45:12"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/2122e86eee9c40eee5d97ffd8e63f396.pdf",
"pages": 17,
"sha256": "ecdcb338440e50e6",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pt7c433833uex.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pt7c433833uex-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9e861540c90f64926bf34f4fabf3cb6e06a7ab1c3ce5f796b172928ad5f7d0ac",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "U",
"source_page": 17,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E": {
"nom_mm": 4.9,
"range_mm": [
4.75,
5.05
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.96,
"range_mm": [
0.82,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "pt7c433833uex.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}