main
History Download
Ray Publish 0.1.0 74159ee

PT5616A

PTC(Princeton Tech) · Motor Driver ICs · SOP-28-300mil

PT5616A from PTC(Princeton Tech), in a SOP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Logic and low-side gate drivers power supply voltage; recommended 11 V to 18 V, absolute maximum 20 V.
2 HINU input Active-low logic input for phase U high-side gate driver output; input is out-phase with output.
3 HINV input Active-low logic input for phase V high-side gate driver output; input is out-phase with output.
4 HINW input Active-low logic input for phase W high-side gate driver output; input is out-phase with output.
5 LINU input Active-low logic input for phase U low-side gate driver output; input is out-phase with output.
6 LINV input Active-low logic input for phase V low-side gate driver output; input is out-phase with output.
7 LINW input Active-low logic input for phase W low-side gate driver output; input is out-phase with output.
8 FAULT output Active-low open-drain fault output indicating over-current, over-temperature (ITRIP) or low-side under-voltage lockout.
9 ITRIP input Analog over-current shutdown input with typical 0.45 V threshold referenced to VSS; when active it shuts down outputs and pulls FAULT and RCIN low.
10 EN input Active-high logic enable input that shuts down all outputs when low (thresholds 2.0 V/1.3 V), with internal pull-up of about 100k; can be extended for NTC over-temperature protection.
11 RCIN bidirectional External RC network input setting FAULT clear delay (approximately R*C); FAULT releases when RCIN exceeds typical 8 V.
12 VSS power_in Logic ground, reference for logic inputs and over-current circuitry.
13 COM power_in Low-side gate drive return, recommended within ±3 V of VSS.
14 LOW output Low-side gate driver W-phase output, typical 200 mA source and 400 mA sink.
15 LOV output Low-side gate driver V-phase output, typical 200 mA source and 400 mA sink.
16 LOU output Low-side gate driver U-phase output, typical 200 mA source and 400 mA sink.
17 NC unconnected Not connected.
18 VSW power_in High-side driver W-phase floating supply offset voltage.
19 HOW output High-side driver W-phase gate driver output.
20 VBW power_in High-side driver W-phase floating supply, absolute maximum 600 V.
21 NC unconnected Not connected.
22 VSV power_in High-side driver V-phase floating supply offset voltage.
23 HOV output High-side driver V-phase gate driver output.
24 VBV power_in High-side driver V-phase floating supply, absolute maximum 600 V.
25 NC unconnected Not connected.
26 VSU power_in High-side driver U-phase floating supply offset voltage.
27 HOU output High-side driver U-phase gate driver output.
28 VBU power_in High-side driver U-phase floating supply, absolute maximum 600 V.

Key specifications

Parameter Value
Manufacturer PTC(Princeton Tech)
Package SOP-28-300mil
Category Power Management ICs
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-side floating supply voltage VB.U.V.W -0.3 600 V 10
Low-side supply voltage VCC -0.3 20 V 10
Logic input voltage (HIN, LIN, ITRIP, EN) VHINU,V,W / VLINU,V,W -0.3 20 V 10
FAULT output voltage VFLT -0.3 V max VCC+0.3 10
RCIN input voltage VRCIN -0.3 V max VCC+0.3 10
High-side input pulse width PWHIN 600 ns 10
Allowable offset voltage slew rate DV/DT 50 V/ns 10
Package power dissipation PD 1.6 W TA ≤ +25℃ 10
Thermal resistance, junction to ambient RthJA 78 °C/W SOP28L-W 10
Junction temperature TJ -50 150 °C 10
Storage temperature TS -40 150 °C 10
Lead temperature TL 300 °C soldering, 10 seconds 10
Low-side supply voltage VCC 11 15 18 V 10
High-side floating supply voltage VB.U.V.W -10 600 V 10
Logic gate driver return COM -3 3 V 10
Logic input voltage VHINU,V,W / VLINU,V,W 0 5 V 10
IC operating junction temperature TJ -40 125 °C 10
VCC quiescent current IQVCC 1 1.5 mA VHIN,VLIN=0 or 5V 11
VCC supply UV positive going threshold VCCUV+ 7.9 8.9 10 V 11
VCC supply UV negative going threshold VCCUV- 7.2 8.2 9.2 V 11
VCC UV lockout hysteresis VCCHYS 0.7 V 11
VBS UV positive going threshold VBSUV+ 6 8 10 V 11
VBS UV negative going threshold VBSUV- 5.5 7.5 9.5 V 11
VBS UV lockout hysteresis VBSUVHYS 0.5 V 11
High side VBS quiescent current IQBS 45 65 85 μA VBS=15V 11
Offset supply leakage current ILK 1 μA VB=VS=600V VCC=0V 11
Output high short-circuit pulse current IO+ 200 mA VHO=VS=0, VHO=VB=15V, VLO=COM=0, VLO=VCC=15V 11
Output low short-circuit pulse current IO- 400 mA VHO=VS=0, VHO=VB=15V, VLO=COM=0, VLO=VCC=15V 11
High level output voltage drop VOH 0.8 1.5 V IO+=20 mA 11
Low level output voltage drop VOL 0.3 0.5 V IO-=20 mA 11
Allowable negative VS pin voltage VSN -10 V Fixed VBS=15V 11
Logic 1 input voltage VIH 2.5 V 11
Logic 0 input voltage VIL 0.8 V 11
Input positive going threshold VIN,TH+ 2 V 11
Input negative going threshold VIN,TH- 1.3 V 11
Logic 1 input bias current IIN+ 0 uA VIN=5V 11
Logic 0 input bias current IIN- 100 150 uA VIN=0 11
RCIN positive going threshold VRCIN,TH 8 V 11
RCIN hysteresis VRCIN,HY 3 V 11
RCIN internal charge current IRCIN 2 uA VRCIN=3V 11
RCIN pull-down MOSFET on resistance RON,RCIN 40 80 ISINK=2mA 11
ITRIP positive going threshold VIT,TH+ 0.3 0.45 0.6 V 11
ITRIP hysteresis VIT,HYS 40 70 mV 11
High ITRIP input bias current IITRIP+ 50 80 uA VIT=5V 11
Low ITRIP input bias current IITRIP- 0 1 uA VIT=0V 11
Enable positive going threshold VEN,TH+ 2 2.5 V 11
Enable negative going threshold VEN,TH- 0.8 1.3 V 11
High enable input bias current IEN+ 100 uA VEN=5V 11
Low enable input bias current IEN- 0 uA VEN=0V 11
FAULT low on resistance RON,FLT 40 80 ISINK=2mA 11
VCC operating supply current IVCCOP 4 6 mA fLIN=20k, fHIN=20k 12
Turn-on propagation delay tON 250 500 750 ns VHIN or VLIN=0V, VS=5V 12
Turn-off propagation delay tOFF 240 480 720 ns VHIN or VLIN=5V, VS=5V 12
Turn-on rise time tR 120 ns VHIN or VLIN=0V, VS=5V 12
Turn-off fall time tF 50 ns VHIN or VLIN=5V, VS=5V 12
Input filtering time tFIL,IN 150 250 350 ns 12
Dead time DT 300 500 700 ns HIN and LIN inputs without external dead time 12
Dead-time matching (all six channels) MDT 80 ns HIN and LIN inputs without external dead time 12
Delay matching (tON, tOFF, all six channels) MT 80 ns HIN and LIN inputs with external dead time >2us 12
Output pulse-width matching PM 80 ns PWIN=5us, PM=PWOUT-PWIN 12
Enable low to output shutdown propagation delay tEN 200 400 600 ns VHIN or VLIN=0V, VEN=0V, VHO or VLO=0 12
FAULT clear time tFLTCLR 1.2 1.6 2 ms RCIN: R=2 M, C=1 nF 12
ITRIP to output shutdown propagation delay tITRIP 500 700 900 ns VHIN or VLIN=5V, VHO or VLO=0, VIT=5V 12
ITRIP to FAULT propagation delay tFLT 250 450 650 ns VIT=5V, VFLT Low 12

CAD (KiCad official)

  • Symbol: PT5616A
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOP-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pt5616a-etched.step / pt5616a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt5616a.step / pt5616a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PTC(Princeton Tech) datasheet (14 pp, sha256 e3fcd164629fee33, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF