Generated by kicad-footprint-generator · KiCad file format 20260206
PT5616A
PTC(Princeton Tech) · Motor Driver ICs · SOP-28-300mil
PT5616A from PTC(Princeton Tech), in a SOP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Logic and low-side gate drivers power supply voltage; recommended 11 V to 18 V, absolute maximum 20 V. |
| 2 | HINU | input | Active-low logic input for phase U high-side gate driver output; input is out-phase with output. |
| 3 | HINV | input | Active-low logic input for phase V high-side gate driver output; input is out-phase with output. |
| 4 | HINW | input | Active-low logic input for phase W high-side gate driver output; input is out-phase with output. |
| 5 | LINU | input | Active-low logic input for phase U low-side gate driver output; input is out-phase with output. |
| 6 | LINV | input | Active-low logic input for phase V low-side gate driver output; input is out-phase with output. |
| 7 | LINW | input | Active-low logic input for phase W low-side gate driver output; input is out-phase with output. |
| 8 | FAULT | output | Active-low open-drain fault output indicating over-current, over-temperature (ITRIP) or low-side under-voltage lockout. |
| 9 | ITRIP | input | Analog over-current shutdown input with typical 0.45 V threshold referenced to VSS; when active it shuts down outputs and pulls FAULT and RCIN low. |
| 10 | EN | input | Active-high logic enable input that shuts down all outputs when low (thresholds 2.0 V/1.3 V), with internal pull-up of about 100k; can be extended for NTC over-temperature protection. |
| 11 | RCIN | bidirectional | External RC network input setting FAULT clear delay (approximately R*C); FAULT releases when RCIN exceeds typical 8 V. |
| 12 | VSS | power_in | Logic ground, reference for logic inputs and over-current circuitry. |
| 13 | COM | power_in | Low-side gate drive return, recommended within ±3 V of VSS. |
| 14 | LOW | output | Low-side gate driver W-phase output, typical 200 mA source and 400 mA sink. |
| 15 | LOV | output | Low-side gate driver V-phase output, typical 200 mA source and 400 mA sink. |
| 16 | LOU | output | Low-side gate driver U-phase output, typical 200 mA source and 400 mA sink. |
| 17 | NC | unconnected | Not connected. |
| 18 | VSW | power_in | High-side driver W-phase floating supply offset voltage. |
| 19 | HOW | output | High-side driver W-phase gate driver output. |
| 20 | VBW | power_in | High-side driver W-phase floating supply, absolute maximum 600 V. |
| 21 | NC | unconnected | Not connected. |
| 22 | VSV | power_in | High-side driver V-phase floating supply offset voltage. |
| 23 | HOV | output | High-side driver V-phase gate driver output. |
| 24 | VBV | power_in | High-side driver V-phase floating supply, absolute maximum 600 V. |
| 25 | NC | unconnected | Not connected. |
| 26 | VSU | power_in | High-side driver U-phase floating supply offset voltage. |
| 27 | HOU | output | High-side driver U-phase gate driver output. |
| 28 | VBU | power_in | High-side driver U-phase floating supply, absolute maximum 600 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PTC(Princeton Tech) |
| Package | SOP-28-300mil |
| Category | Power Management ICs |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage | VB.U.V.W | -0.3 | 600 | V | 10 | ||
| Low-side supply voltage | VCC | -0.3 | 20 | V | 10 | ||
| Logic input voltage (HIN, LIN, ITRIP, EN) | VHINU,V,W / VLINU,V,W | -0.3 | 20 | V | 10 | ||
| FAULT output voltage | VFLT | -0.3 | V | max VCC+0.3 | 10 | ||
| RCIN input voltage | VRCIN | -0.3 | V | max VCC+0.3 | 10 | ||
| High-side input pulse width | PWHIN | 600 | ns | 10 | |||
| Allowable offset voltage slew rate | DV/DT | 50 | V/ns | 10 | |||
| Package power dissipation | PD | 1.6 | W | TA ≤ +25℃ | 10 | ||
| Thermal resistance, junction to ambient | RthJA | 78 | °C/W | SOP28L-W | 10 | ||
| Junction temperature | TJ | -50 | 150 | °C | 10 | ||
| Storage temperature | TS | -40 | 150 | °C | 10 | ||
| Lead temperature | TL | 300 | °C | soldering, 10 seconds | 10 | ||
| Low-side supply voltage | VCC | 11 | 15 | 18 | V | 10 | |
| High-side floating supply voltage | VB.U.V.W | -10 | 600 | V | 10 | ||
| Logic gate driver return | COM | -3 | 3 | V | 10 | ||
| Logic input voltage | VHINU,V,W / VLINU,V,W | 0 | 5 | V | 10 | ||
| IC operating junction temperature | TJ | -40 | 125 | °C | 10 | ||
| VCC quiescent current | IQVCC | 1 | 1.5 | mA | VHIN,VLIN=0 or 5V | 11 | |
| VCC supply UV positive going threshold | VCCUV+ | 7.9 | 8.9 | 10 | V | 11 | |
| VCC supply UV negative going threshold | VCCUV- | 7.2 | 8.2 | 9.2 | V | 11 | |
| VCC UV lockout hysteresis | VCCHYS | 0.7 | V | 11 | |||
| VBS UV positive going threshold | VBSUV+ | 6 | 8 | 10 | V | 11 | |
| VBS UV negative going threshold | VBSUV- | 5.5 | 7.5 | 9.5 | V | 11 | |
| VBS UV lockout hysteresis | VBSUVHYS | 0.5 | V | 11 | |||
| High side VBS quiescent current | IQBS | 45 | 65 | 85 | μA | VBS=15V | 11 |
| Offset supply leakage current | ILK | 1 | μA | VB=VS=600V VCC=0V | 11 | ||
| Output high short-circuit pulse current | IO+ | 200 | mA | VHO=VS=0, VHO=VB=15V, VLO=COM=0, VLO=VCC=15V | 11 | ||
| Output low short-circuit pulse current | IO- | 400 | mA | VHO=VS=0, VHO=VB=15V, VLO=COM=0, VLO=VCC=15V | 11 | ||
| High level output voltage drop | VOH | 0.8 | 1.5 | V | IO+=20 mA | 11 | |
| Low level output voltage drop | VOL | 0.3 | 0.5 | V | IO-=20 mA | 11 | |
| Allowable negative VS pin voltage | VSN | -10 | V | Fixed VBS=15V | 11 | ||
| Logic 1 input voltage | VIH | 2.5 | V | 11 | |||
| Logic 0 input voltage | VIL | 0.8 | V | 11 | |||
| Input positive going threshold | VIN,TH+ | 2 | V | 11 | |||
| Input negative going threshold | VIN,TH- | 1.3 | V | 11 | |||
| Logic 1 input bias current | IIN+ | 0 | uA | VIN=5V | 11 | ||
| Logic 0 input bias current | IIN- | 100 | 150 | uA | VIN=0 | 11 | |
| RCIN positive going threshold | VRCIN,TH | 8 | V | 11 | |||
| RCIN hysteresis | VRCIN,HY | 3 | V | 11 | |||
| RCIN internal charge current | IRCIN | 2 | uA | VRCIN=3V | 11 | ||
| RCIN pull-down MOSFET on resistance | RON,RCIN | 40 | 80 | ISINK=2mA | 11 | ||
| ITRIP positive going threshold | VIT,TH+ | 0.3 | 0.45 | 0.6 | V | 11 | |
| ITRIP hysteresis | VIT,HYS | 40 | 70 | mV | 11 | ||
| High ITRIP input bias current | IITRIP+ | 50 | 80 | uA | VIT=5V | 11 | |
| Low ITRIP input bias current | IITRIP- | 0 | 1 | uA | VIT=0V | 11 | |
| Enable positive going threshold | VEN,TH+ | 2 | 2.5 | V | 11 | ||
| Enable negative going threshold | VEN,TH- | 0.8 | 1.3 | V | 11 | ||
| High enable input bias current | IEN+ | 100 | uA | VEN=5V | 11 | ||
| Low enable input bias current | IEN- | 0 | uA | VEN=0V | 11 | ||
| FAULT low on resistance | RON,FLT | 40 | 80 | ISINK=2mA | 11 | ||
| VCC operating supply current | IVCCOP | 4 | 6 | mA | fLIN=20k, fHIN=20k | 12 | |
| Turn-on propagation delay | tON | 250 | 500 | 750 | ns | VHIN or VLIN=0V, VS=5V | 12 |
| Turn-off propagation delay | tOFF | 240 | 480 | 720 | ns | VHIN or VLIN=5V, VS=5V | 12 |
| Turn-on rise time | tR | 120 | ns | VHIN or VLIN=0V, VS=5V | 12 | ||
| Turn-off fall time | tF | 50 | ns | VHIN or VLIN=5V, VS=5V | 12 | ||
| Input filtering time | tFIL,IN | 150 | 250 | 350 | ns | 12 | |
| Dead time | DT | 300 | 500 | 700 | ns | HIN and LIN inputs without external dead time | 12 |
| Dead-time matching (all six channels) | MDT | 80 | ns | HIN and LIN inputs without external dead time | 12 | ||
| Delay matching (tON, tOFF, all six channels) | MT | 80 | ns | HIN and LIN inputs with external dead time >2us | 12 | ||
| Output pulse-width matching | PM | 80 | ns | PWIN=5us, PM=PWOUT-PWIN | 12 | ||
| Enable low to output shutdown propagation delay | tEN | 200 | 400 | 600 | ns | VHIN or VLIN=0V, VEN=0V, VHO or VLO=0 | 12 |
| FAULT clear time | tFLTCLR | 1.2 | 1.6 | 2 | ms | RCIN: R=2 M, C=1 nF | 12 |
| ITRIP to output shutdown propagation delay | tITRIP | 500 | 700 | 900 | ns | VHIN or VLIN=5V, VHO or VLO=0, VIT=5V | 12 |
| ITRIP to FAULT propagation delay | tFLT | 250 | 450 | 650 | ns | VIT=5V, VFLT Low | 12 |
CAD (KiCad official)
- Symbol:
PT5616A - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOP-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pt5616a-etched.step/pt5616a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt5616a.step/pt5616a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PTC(Princeton Tech) datasheet (14 pp, sha256
e3fcd164629fee33, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).