main
Ray
Publish 0.1.0
fc830a4
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180
{
"slug": "pt2022at6",
"version": "0.1.0",
"type": "component",
"description": "PinTENG(品腾) Touch Sensors, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"pt2022at6",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pt2022at6.kicad_sym",
"pt2022at6.kicad_mod",
"pt2022at6.glb",
"pt2022at6.step",
"pt2022at6.lbr",
"docs/hero.png",
"docs/pt2022at6-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pt2022at6-hero.glb",
"pt2022at6-hero.overlay.json",
"pt2022at6-etched.glb"
],
"component": {
"mpn": "PT2022AT6",
"manufacturer": "PinTENG(品腾)",
"package": "SOT-23-6",
"pin_count": 6,
"category": "Sensors",
"subcategory": "Touch Sensors",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8609202147364265984",
"parts": {
"symbol": "pt2022at6.kicad_sym",
"footprint": "pt2022at6.kicad_mod",
"model_3d": "pt2022at6-hero.glb",
"model_3d_plain": "pt2022at6-etched.glb",
"model_3d_step": "pt2022at6-etched.step",
"model_3d_step_plain": "pt2022at6.step",
"lbr": "pt2022at6.lbr"
},
"distributor_links": {
"lcsc": "C20625029"
},
"distributor_check": {
"checked_at": "2026-11-07T04:06:48Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "TCH",
"type": "bidirectional",
"description": "Touch sensing input pin for the single capacitive touch channel of the PT2022AT6."
},
{
"number": "2",
"name": "VSS",
"type": "power_in",
"description": "Negative power supply (ground) pin, the return for the 2.4 V to 5.5 V supply on VDD."
},
{
"number": "3",
"name": "CMOD",
"type": "bidirectional",
"description": "Sampling capacitor pin, where the external CMOD capacitor to GND sets touch sensitivity: a larger capacitance gives higher sensitivity and a smaller one lower sensitivity."
},
{
"number": "4",
"name": "AHLB",
"type": "bidirectional",
"description": "Output initial-state setting pin read at power-up: tying it to VDD powers up with OUT high, tying it to GND powers up with OUT low, and leaving it floating sets OUT high."
},
{
"number": "5",
"name": "VDD",
"type": "power_in",
"description": "Positive power supply pin, with an operating range of 2.4 V to 5.5 V and an absolute maximum of 6.0 V."
},
{
"number": "6",
"name": "OUT",
"type": "bidirectional",
"description": "Synchronous switch output that toggles while a touch is active and returns to its power-up state on release, and the output is forced inactive after 16 s (±30%) of continuous activation."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet lists AHLB and OUT as type I/O without a direction; I mapped them to KiCad bidirection; The pin diagram text in the extracted datasheet is scrambled, so pin numbering was taken from the Ta; The datasheet gives only SOT23-6 and a single package, so the pinout applies to the sold variant as "
],
"pages_sent": 6,
"cost_usd": 0.0436,
"at": "2026-11-07T04:06:35"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8609202147364265984",
"pages": 6,
"sha256": "f9a494b71d629237",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 6,
"described": 6,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pt2022at6.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
"checked": "2026-11-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pt2022at6-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "67b6f4f34e6497c5bfbcde4ece02bde2555f51bf579f3e21db1523538c772300",
"checked": "2026-11-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}