3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPT2022AT6
PinTENG(品腾) · Touch Sensors · SOT-23-6
PT2022AT6 from PinTENG(品腾), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TCH | bidirectional | Touch sensing input pin for the single capacitive touch channel of the PT2022AT6. |
| 2 | VSS | power_in | Negative power supply (ground) pin, the return for the 2.4 V to 5.5 V supply on VDD. |
| 3 | CMOD | bidirectional | Sampling capacitor pin, where the external CMOD capacitor to GND sets touch sensitivity: a larger capacitance gives higher sensitivity and a smaller one lower sensitivity. |
| 4 | AHLB | bidirectional | Output initial-state setting pin read at power-up: tying it to VDD powers up with OUT high, tying it to GND powers up with OUT low, and leaving it floating sets OUT high. |
| 5 | VDD | power_in | Positive power supply pin, with an operating range of 2.4 V to 5.5 V and an absolute maximum of 6.0 V. |
| 6 | OUT | bidirectional | Synchronous switch output that toggles while a touch is active and returns to its power-up state on release, and the output is forced inactive after 16 s (±30%) of continuous activation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PinTENG(品腾) |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (Supply voltage, absolute maximum) | VDD | 0 | 6 | V | 4 | ||
| 输入电压 (Input voltage, all I/O) | VI | -0.3 | V | 所有 I/O口 | 4 | ||
| 工作温度 (Operating temperature) | TA | -40 | 85 | ℃ | 4 | ||
| 储藏温度 (Storage temperature) | TSTG | -50 | 125 | ℃ | 4 | ||
| 工作电压 (Operating voltage) | VDD | 2.4 | 5.5 | V | 4 | ||
| GPIO 拉电流 (Source current) | IOH | 6 | mA | VDD=5V, VOH=0.9VDD | 4 | ||
| GPIO 灌电流 (Sink current) | IOL | 18 | mA | VDD=5V, VOL=0.1VDD | 4 | ||
| 待机电流 (Standby current) | ISB | 6 | uA | VDD=5V,Cmod=10nF | 4 | ||
| 待机电流 (Standby current) | ISB | 4 | uA | VDD=3V,Cmod=10nF | 4 |
CAD (KiCad official)
- Symbol:
PT2022AT6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
pt2022at6-etched.step/pt2022at6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt2022at6.step/pt2022at6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PinTENG(品腾) datasheet (6 pp, sha256
f9a494b71d629237, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).