main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pms152-s14: symbol repaired (body fitted to the names) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pms152-s14-etched.glb Publish 0.1.0 · Ray
pms152-s14-etched.step pms152-s14: factory component page (tier=lcsc) · Ray
pms152-s14-hero.glb pms152-s14: hero GLB from the etched model (keeps the MPN mark) · Ray
pms152-s14-hero.overlay.json Publish 0.1.0 · Ray
pms152-s14.glb Publish 0.1.0 · Ray
pms152-s14.kicad_mod Publish 0.1.0 · Ray
pms152-s14.kicad_sym pms152-s14: symbol repaired (body fitted to the names) · Ray
pms152-s14.lbr pms152-s14: symbol repaired (body fitted to the names) · Ray
pms152-s14.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray

PMS152-S14

PADAUK Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-14

PMS152-S14 from PADAUK Tech, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB5/PG0PWM/INT0A bidirectional Bit 5 of port B, digital input or two-state output with optional pull-up; also PWMG0 output and external interrupt line 0A (both edges, configurable), 5mA drive/30mA sink.
2 PB6/CIN4-/PG1PWM bidirectional Bit 6 of port B, digital I/O with optional pull-up; also comparator minus input 4 and PWMG1 output, with pbdier bit 6 set to 0 to prevent leakage when analog.
3 PB7/CIN5-/PG1PWM bidirectional Bit 7 of port B, digital I/O with optional pull-up; also comparator minus input 5 and PWMG1 output, 5mA drive/30mA sink, with pbdier bit 7 set to 0 when analog.
4 VDD power_in Positive power supply, operating range 1.8V to 5.5V.
5 PA7/X1 bidirectional Bit 7 of port A, input or output with pull-up; also crystal XIN, with padier bit 7 programmed to 0 when used for the crystal to avoid leakage.
6 PA6/X2 bidirectional Bit 6 of port A, input or output with pull-up; also crystal XOUT, with padier bit 6 programmed to 0 when used for the crystal to avoid leakage.
7 PRSTB input Shown as PRSTB on the SOP14 drawing; this is the PA5/PRSTB/PG2PWM pin, an input or open-drain output (10mA sink) that serves as hardware reset and PWMG2 output, with a 33 ohm series resistor advised in input mode.
8 PA3/CIN0-/TM2PWM/PG2PWM bidirectional Bit 3 of port A, digital I/O with optional pull-up; also comparator minus input 0, Timer2 PWM output and PWMG2 output, with padier bit 3 set to 0 when analog.
9 PA4/CIN+/CIN1-/INT1A/PG1PWM bidirectional Bit 4 of port A, digital I/O with optional pull-up; also comparator plus input, comparator minus input 1, external interrupt 1A and PWMG1 output, with padier bit 4 set to 0 when analog.
10 PA0/CO/PG0PWM/INT0 bidirectional Bit 0 of port A, digital I/O with optional pull-up; also comparator output, PWMG0 output and external interrupt line 0 (both edges, configurable).
11 GND power_in Ground.
12 PB0/INT1 bidirectional Bit 0 of port B, digital I/O with optional pull-up; also external interrupt line 1 (both edges, configurable).
13 PB1 bidirectional Bit 1 of port B, digital input or two-state output with optional pull-up resistor.
14 PB2/TM2PWM/PG2PWM bidirectional Bit 2 of port B, digital I/O with optional pull-up; also Timer2 PWM output and PWMG2 output.

Key specifications

Parameter Value
Manufacturer PADAUK Tech
Package SOP-14
Category Embedded Processors & Controllers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Operating Voltage VDD 1.8 5 5.5 V * Subject to LVR tolerance 16
Low Voltage Reset Tolerance LVR% -5 5 % 16
System clock (CLK) = IHRC/2 fSYS 0 8 MHz VDD ≧ 3.5V 16
System clock (CLK) = IHRC/4 fSYS 0 4 MHz VDD ≧ 2.5V 16
System clock (CLK) = IHRC/8 fSYS 0 2 MHz VDD ≧ 1.8V 16
Power On Reset Voltage VPOR 1.8 V * Subject to LVR tolerance 16
Operating Current (fSYS=IHRC/16) IOP 1 mA fSYS=IHRC/16=[email protected] 16
Operating Current (fSYS=ILRC) IOP 15 uA fSYS=ILRC=[email protected] 16
Power Down Current (stopsys) IPD 1 uA fSYS= 0Hz, VDD =5.0V 16
Power Down Current (stopsys) IPD 0.6 uA fSYS= 0Hz, VDD =3.3V 16
Power Save Current (stopexe) IPS 5 uA VDD =5.0V; fSYS= ILRC; only ILRC module is enabled 16
Input low voltage for IO lines (PA5) VIL 0 0.1 x VDD 16
Input low voltage for IO lines (others) VIL 0 0.2 x VDD 16
Input high voltage for IO lines (PA5) VIH 0.8 x VDD 16
Input high voltage for IO lines (others) VIH 0.7 x VDD 16
IO lines sink current (PA7, PA6, PA5, PA4, PA3, PA0) IOL 10 mA VDD=5.0V, VOL=0.5V 16
IO lines sink current (PB6, PB4, PB2, PB1, PB0) IOL 10 mA VDD=5.0V, VOL=0.5V 16
IO lines sink current (PB7, PB5, PB3) IOL 30 mA VDD=5.0V, VOL=0.5V 16
IO lines drive current (PA5) IOH 0 mA VDD=5.0V, VOH=4.5V 16
IO lines drive current (PA7, PA6, PA4, PA3, PA0) IOH -5 mA VDD=5.0V, VOH=4.5V 16
IO lines drive current (PB7, PB6, PB5, PB4, PB3) IOH -5 mA VDD=5.0V, VOH=4.5V 16
IO lines drive current (PB2, PB1, PB0) IOH -5 mA VDD=5.0V, VOH=4.5V 16
Input voltage VIN -0.3 V 16
Injected current on pin IINJ (PIN) 1 mA VDD +0.3≧VIN≧ -0.3 16
Band-gap Reference Voltage VBG 1.145 1.2 1.255 V VDD =2.2V ~ 5.5V 16
Frequency of IHRC after calibration fIHRC 15.76 16 16.24 MHz 25oC, VDD =2.2V~5.5V 16
Frequency of IHRC after calibration fIHRC 15.2 16 16.8 MHz VDD =2.2V~5.5V, -20oC <Ta<70oC 16
Frequency of IHRC after calibration fIHRC 13.6 16 18.4 MHz VDD =1.8V~5.5V, -20oC <Ta<70oC 16
Interrupt pulse width tINT 30 ns VDD = 5.0V 16
RAM data retention voltage VDR 1.5 V in stop mode 17
Wake-up time period for fast wake-up tWUP 45 TILRC Where TILRC is the time period of ILRC 17
Wake-up time period for normal wake-up tWUP 3000 TILRC Where TILRC is the time period of ILRC 17
System boot-up period from power-on for Normal boot-up tSBP 55 ms VDD =5V 17
System boot-up period from power-on for Fast boot-up tSBP 820 us 17
External reset pulse width tRST 120 us @ VDD =5V 17
Comparator offset CPos -20 10 20 mV 17
Comparator input common mode CPcm 0 V 17
Comparator response time CPspt 100 500 ns Both Rising and Falling 17
Stable time to change comparator mode CPmc 2.5 7.5 us 17
Comparator current consumption CPcs 20 uA VDD = 3.3V 17
Supply Voltage (maximum rating) VDD 5.5 V 17
Operating Temperature TA -20 70 °C 17
Storage Temperature TSTG -50 125 °C 17
Junction Temperature TJ 150 °C 17
System clock (CLK) = ILRC fSYS 55 kHz VDD = 3.0V 16
Pull-high Resistance RPH 100 KΩ VDD =5.0V 16
Pull-high Resistance RPH 200 KΩ VDD =3.0V 16

CAD (KiCad official)

  • Symbol: PMS152-S14
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: pms152-s14-etched.step / pms152-s14-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pms152-s14.step / pms152-s14.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PADAUK Tech datasheet (87 pp, sha256 cf25bfc11ccaa8a5, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF