main
Ray
Publish 0.1.0
48622f1
PLL1708DBQR
Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · SSOP-20-150mil
PLL1708DBQR from Texas Instruments, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Digital power supply 1, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
| 2 | SCKO2 | output | System clock output 2 at 256 fS (fS = 16 to 96 kHz), with a 3.3 V supply and 20-80% rise/fall times of 2.0 ns maximum. |
| 3 | SCKO3 | output | System clock output 3 at 384 fS (fS = 16 to 96 kHz), with 45-55% output duty cycle. |
| 4 | DGND1 | power_in | Digital ground 1, to be connected to the common ground to avoid latch-up. |
| 5 | MD | input | Data input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 6 | MC | input | Bit clock input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 7 | MS | input | Chip select input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 8 | VCC | power_in | Analog power supply, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
| 9 | AGND | power_in | Analog ground, to be connected to the common ground to avoid latch-up. |
| 10 | XT1 | input | 27-MHz crystal oscillator or external clock input, with a 27 MHz master clock frequency range of 26.73 to 27.27 MHz. |
| 11 | XT2 | output | 27-MHz crystal oscillator output, which must be left open for external clock input mode. |
| 12 | CSEL | input | SCKO1 frequency selection control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 13 | VDD2 | power_in | Digital power supply 2, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
| 14 | MCKO1 | output | 27-MHz master clock output 1, with 20-80% rise and fall times of 2.0 ns maximum. |
| 15 | MCKO2 | output | 27-MHz master clock output 2, with 20-80% rise and fall times of 2.0 ns maximum. |
| 16 | DGND2 | power_in | Digital ground 2, to be connected to the common ground to avoid latch-up. |
| 17 | DGND3 | power_in | Digital ground 3, to be connected to the common ground to avoid latch-up. |
| 18 | SCKO0 | output | System clock output 0, fixed at 33.8688 MHz, with 45-55% output duty cycle. |
| 19 | SCKO1 | output | System clock output 1, selectable for 48 kHz at 12.288, 24.576 or 36.864 MHz depending on configuration. |
| 20 | VDD3 | power_in | Digital power supply 3, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-150mil |
| Category | RTC/Clock Chip |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic input current | IIH | 65 | 100 | µA | VIN = VDD | 3 | |
| Logic input current | IIL | -10 | 10 | µA | VIN = 0 V | 3 | |
| Output logic level | VOL | 0.4 | Vdc | IOL = 4 mA | 3 | ||
| Master clock frequency | 26.73 | 27 | 27.27 | MHz | 3 | ||
| Sampling frequency PLL1708 standard fS | 32 | 44.1 | 48 | kHz | 3 | ||
| Sampling frequency PLL1708 double fS | 64 | 88.2 | 96 | kHz | 3 | ||
| Master clock pulse duration HIGH | t(XT1H) | 10 | ns | 10 | |||
| Master clock pulse duration LOW | t(XT1L) | 10 | ns | 10 | |||
| Output duty cycle (master clock) | 45 | 51 | 55 | % | For crystal oscillation | 3 | |
| Output duty cycle (external clock) | 50 | % | For external clock | 3 | |||
| Output rise time | 2 | ns | 20% to 80% of VDD | 3 | |||
| Output fall time | 2 | ns | 80% to 20% of VDD | 3 | |||
| Output duty cycle (system clocks) | 45 | 50 | 55 | % | 3 | ||
| Output system clock frequency SCKO1 selectable for 48 kHz | SCKO1 | 12.288 | 24.576 | 36.864 | MHz | PLL1708, selectable for 48 kHz | 3 |
| Output system clock frequency SCKO2 256 fS | SCKO2 | 4.096 | 12.288 | 24.576 | MHz | PLL1708, 256 fS | 3 |
| Output system clock frequency SCKO3 384 fS | SCKO3 | 6.144 | 18.432 | 36.864 | MHz | PLL1708, 384 fS | 3 |
| Output system clock frequency SCKO0 fixed | SCKO0 | 33.8688 | MHz | Fixed | 3 | ||
| Power-up time to oscillation | 0.5 | 1.5 | ms | 3 | |||
| Clock jitter | 50 | ps | 3 | ||||
| Output clock jitter SCKO0, SCKO1 | 58 | 100 | ps | SCKO0, SCKO1 | 4 | ||
| Output clock jitter SCKO2, SCKO3 | 50 | 100 | ps | SCKO2, SCKO3 | 4 | ||
| Frequency settling time PLL1708 | 80 | 300 | ns | PLL1708, to stated output frequency | 4 | ||
| Power-up time to stated output frequency | 3 | 6 | ms | To stated output frequency | 4 | ||
| Supply voltage range VCC, VDD | VCC, VDD | 2.7 | 3.3 | 3.6 | Vdc | 4 | |
| Supply current (IDD + ICC) | IDD + ICC | 19 | 25 | mA | VDD = VCC = 3.3 V, fS = 48 kHz | 4 | |
| Supply current power down | IDD + ICC | 350 | 550 | µA | Power down | 4 | |
| Power dissipation | 63 | 90 | mW | VDD = VCC = 3.3 V, fS = 48 kHz | 4 | ||
| Operating temperature | TA | -25 | 85 | °C | 4 | ||
| Thermal resistance junction to ambient | θJA | 150 | °C/W | PLL1707/8DBQ: 20-pin SSOP (150 mil) | 4 | ||
| MC pulse cycle time | t(MCY) | 100 | ns | 14 | |||
| MC pulse duration LOW | t(MCL) | 40 | ns | 14 | |||
| MC pulse duration HIGH | t(MCH) | 40 | ns | 14 | |||
| MD hold time | t(MDH) | 40 | ns | 14 | |||
| MD setup time | t(MDS) | 40 | ns | 14 | |||
| MS low-level time | t(MSL) | 16 | MC clocks | 14 | |||
| MS high-level time | t(MHH) | 200 | ns | 14 | |||
| MS hold time | t(MSH) | 40 | ns | 14 | |||
| MS setup time | t(MSS) | 40 | ns | 14 |
CAD (KiCad official)
- Symbol:
PLL1708DBQR - Footprint:
Package_SO:SSOP-20_3.9x8.7mm_P0.635mm - 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
- 3D model files:
pll1708dbqr-etched.step/pll1708dbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pll1708dbqr.step/pll1708dbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
c3c9acedead66728, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PLL1708DBQR
**Texas Instruments** · Clock Generators / Frequency Synthesizers / PLL · SSOP-20-150mil
PLL1708DBQR from Texas Instruments, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Digital power supply 1, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
| 2 | SCKO2 | output | System clock output 2 at 256 fS (fS = 16 to 96 kHz), with a 3.3 V supply and 20-80% rise/fall times of 2.0 ns maximum. |
| 3 | SCKO3 | output | System clock output 3 at 384 fS (fS = 16 to 96 kHz), with 45-55% output duty cycle. |
| 4 | DGND1 | power_in | Digital ground 1, to be connected to the common ground to avoid latch-up. |
| 5 | MD | input | Data input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 6 | MC | input | Bit clock input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 7 | MS | input | Chip select input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 8 | VCC | power_in | Analog power supply, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
| 9 | AGND | power_in | Analog ground, to be connected to the common ground to avoid latch-up. |
| 10 | XT1 | input | 27-MHz crystal oscillator or external clock input, with a 27 MHz master clock frequency range of 26.73 to 27.27 MHz. |
| 11 | XT2 | output | 27-MHz crystal oscillator output, which must be left open for external clock input mode. |
| 12 | CSEL | input | SCKO1 frequency selection control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance. |
| 13 | VDD2 | power_in | Digital power supply 2, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
| 14 | MCKO1 | output | 27-MHz master clock output 1, with 20-80% rise and fall times of 2.0 ns maximum. |
| 15 | MCKO2 | output | 27-MHz master clock output 2, with 20-80% rise and fall times of 2.0 ns maximum. |
| 16 | DGND2 | power_in | Digital ground 2, to be connected to the common ground to avoid latch-up. |
| 17 | DGND3 | power_in | Digital ground 3, to be connected to the common ground to avoid latch-up. |
| 18 | SCKO0 | output | System clock output 0, fixed at 33.8688 MHz, with 45-55% output duty cycle. |
| 19 | SCKO1 | output | System clock output 1, selectable for 48 kHz at 12.288, 24.576 or 36.864 MHz depending on configuration. |
| 20 | VDD3 | power_in | Digital power supply 3, 3.3 V nominal, within a 2.7 V to 3.6 V supply range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-150mil |
| Category | RTC/Clock Chip |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic input current | IIH | | 65 | 100 | µA | VIN = VDD | 3 |
| Logic input current | IIL | -10 | | 10 | µA | VIN = 0 V | 3 |
| Output logic level | VOL | | | 0.4 | Vdc | IOL = 4 mA | 3 |
| Master clock frequency | | 26.73 | 27 | 27.27 | MHz | | 3 |
| Sampling frequency PLL1708 standard fS | | 32 | 44.1 | 48 | kHz | | 3 |
| Sampling frequency PLL1708 double fS | | 64 | 88.2 | 96 | kHz | | 3 |
| Master clock pulse duration HIGH | t(XT1H) | 10 | | | ns | | 10 |
| Master clock pulse duration LOW | t(XT1L) | 10 | | | ns | | 10 |
| Output duty cycle (master clock) | | 45 | 51 | 55 | % | For crystal oscillation | 3 |
| Output duty cycle (external clock) | | | 50 | | % | For external clock | 3 |
| Output rise time | | | | 2 | ns | 20% to 80% of VDD | 3 |
| Output fall time | | | | 2 | ns | 80% to 20% of VDD | 3 |
| Output duty cycle (system clocks) | | 45 | 50 | 55 | % | | 3 |
| Output system clock frequency SCKO1 selectable for 48 kHz | SCKO1 | 12.288 | 24.576 | 36.864 | MHz | PLL1708, selectable for 48 kHz | 3 |
| Output system clock frequency SCKO2 256 fS | SCKO2 | 4.096 | 12.288 | 24.576 | MHz | PLL1708, 256 fS | 3 |
| Output system clock frequency SCKO3 384 fS | SCKO3 | 6.144 | 18.432 | 36.864 | MHz | PLL1708, 384 fS | 3 |
| Output system clock frequency SCKO0 fixed | SCKO0 | | 33.8688 | | MHz | Fixed | 3 |
| Power-up time to oscillation | | | 0.5 | 1.5 | ms | | 3 |
| Clock jitter | | | 50 | | ps | | 3 |
| Output clock jitter SCKO0, SCKO1 | | | 58 | 100 | ps | SCKO0, SCKO1 | 4 |
| Output clock jitter SCKO2, SCKO3 | | | 50 | 100 | ps | SCKO2, SCKO3 | 4 |
| Frequency settling time PLL1708 | | | 80 | 300 | ns | PLL1708, to stated output frequency | 4 |
| Power-up time to stated output frequency | | | 3 | 6 | ms | To stated output frequency | 4 |
| Supply voltage range VCC, VDD | VCC, VDD | 2.7 | 3.3 | 3.6 | Vdc | | 4 |
| Supply current (IDD + ICC) | IDD + ICC | | 19 | 25 | mA | VDD = VCC = 3.3 V, fS = 48 kHz | 4 |
| Supply current power down | IDD + ICC | | 350 | 550 | µA | Power down | 4 |
| Power dissipation | | | 63 | 90 | mW | VDD = VCC = 3.3 V, fS = 48 kHz | 4 |
| Operating temperature | TA | -25 | | 85 | °C | | 4 |
| Thermal resistance junction to ambient | θJA | | 150 | | °C/W | PLL1707/8DBQ: 20-pin SSOP (150 mil) | 4 |
| MC pulse cycle time | t(MCY) | 100 | | | ns | | 14 |
| MC pulse duration LOW | t(MCL) | 40 | | | ns | | 14 |
| MC pulse duration HIGH | t(MCH) | 40 | | | ns | | 14 |
| MD hold time | t(MDH) | 40 | | | ns | | 14 |
| MD setup time | t(MDS) | 40 | | | ns | | 14 |
| MS low-level time | t(MSL) | 16 | | | MC clocks | | 14 |
| MS high-level time | t(MHH) | 200 | | | ns | | 14 |
| MS hold time | t(MSH) | 40 | | | ns | | 14 |
| MS setup time | t(MSS) | 40 | | | ns | | 14 |
## CAD (KiCad official)
- Symbol: `PLL1708DBQR`
- Footprint: `Package_SO:SSOP-20_3.9x8.7mm_P0.635mm`
- 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
- 3D model files: `pll1708dbqr-etched.step` / `pll1708dbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pll1708dbqr.step` / `pll1708dbqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pll1708.pdf) (25 pp, sha256 `c3c9acedead66728`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pll1708dbqr-datasheet.pdf)