Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PLL1708DBQR

Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · SSOP-20-150mil

PLL1708DBQR from Texas Instruments, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Digital power supply 1, 3.3 V nominal, within a 2.7 V to 3.6 V supply range.
2 SCKO2 output System clock output 2 at 256 fS (fS = 16 to 96 kHz), with a 3.3 V supply and 20-80% rise/fall times of 2.0 ns maximum.
3 SCKO3 output System clock output 3 at 384 fS (fS = 16 to 96 kHz), with 45-55% output duty cycle.
4 DGND1 power_in Digital ground 1, to be connected to the common ground to avoid latch-up.
5 MD input Data input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance.
6 MC input Bit clock input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance.
7 MS input Chip select input for serial control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance.
8 VCC power_in Analog power supply, 3.3 V nominal, within a 2.7 V to 3.6 V supply range.
9 AGND power_in Analog ground, to be connected to the common ground to avoid latch-up.
10 XT1 input 27-MHz crystal oscillator or external clock input, with a 27 MHz master clock frequency range of 26.73 to 27.27 MHz.
11 XT2 output 27-MHz crystal oscillator output, which must be left open for external clock input mode.
12 CSEL input SCKO1 frequency selection control, a Schmitt-trigger input with internal pulldown and 3.3 V tolerance.
13 VDD2 power_in Digital power supply 2, 3.3 V nominal, within a 2.7 V to 3.6 V supply range.
14 MCKO1 output 27-MHz master clock output 1, with 20-80% rise and fall times of 2.0 ns maximum.
15 MCKO2 output 27-MHz master clock output 2, with 20-80% rise and fall times of 2.0 ns maximum.
16 DGND2 power_in Digital ground 2, to be connected to the common ground to avoid latch-up.
17 DGND3 power_in Digital ground 3, to be connected to the common ground to avoid latch-up.
18 SCKO0 output System clock output 0, fixed at 33.8688 MHz, with 45-55% output duty cycle.
19 SCKO1 output System clock output 1, selectable for 48 kHz at 12.288, 24.576 or 36.864 MHz depending on configuration.
20 VDD3 power_in Digital power supply 3, 3.3 V nominal, within a 2.7 V to 3.6 V supply range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-20-150mil
Category RTC/Clock Chip
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic input current IIH 65 100 µA VIN = VDD 3
Logic input current IIL -10 10 µA VIN = 0 V 3
Output logic level VOL 0.4 Vdc IOL = 4 mA 3
Master clock frequency 26.73 27 27.27 MHz 3
Sampling frequency PLL1708 standard fS 32 44.1 48 kHz 3
Sampling frequency PLL1708 double fS 64 88.2 96 kHz 3
Master clock pulse duration HIGH t(XT1H) 10 ns 10
Master clock pulse duration LOW t(XT1L) 10 ns 10
Output duty cycle (master clock) 45 51 55 % For crystal oscillation 3
Output duty cycle (external clock) 50 % For external clock 3
Output rise time 2 ns 20% to 80% of VDD 3
Output fall time 2 ns 80% to 20% of VDD 3
Output duty cycle (system clocks) 45 50 55 % 3
Output system clock frequency SCKO1 selectable for 48 kHz SCKO1 12.288 24.576 36.864 MHz PLL1708, selectable for 48 kHz 3
Output system clock frequency SCKO2 256 fS SCKO2 4.096 12.288 24.576 MHz PLL1708, 256 fS 3
Output system clock frequency SCKO3 384 fS SCKO3 6.144 18.432 36.864 MHz PLL1708, 384 fS 3
Output system clock frequency SCKO0 fixed SCKO0 33.8688 MHz Fixed 3
Power-up time to oscillation 0.5 1.5 ms 3
Clock jitter 50 ps 3
Output clock jitter SCKO0, SCKO1 58 100 ps SCKO0, SCKO1 4
Output clock jitter SCKO2, SCKO3 50 100 ps SCKO2, SCKO3 4
Frequency settling time PLL1708 80 300 ns PLL1708, to stated output frequency 4
Power-up time to stated output frequency 3 6 ms To stated output frequency 4
Supply voltage range VCC, VDD VCC, VDD 2.7 3.3 3.6 Vdc 4
Supply current (IDD + ICC) IDD + ICC 19 25 mA VDD = VCC = 3.3 V, fS = 48 kHz 4
Supply current power down IDD + ICC 350 550 µA Power down 4
Power dissipation 63 90 mW VDD = VCC = 3.3 V, fS = 48 kHz 4
Operating temperature TA -25 85 °C 4
Thermal resistance junction to ambient θJA 150 °C/W PLL1707/8DBQ: 20-pin SSOP (150 mil) 4
MC pulse cycle time t(MCY) 100 ns 14
MC pulse duration LOW t(MCL) 40 ns 14
MC pulse duration HIGH t(MCH) 40 ns 14
MD hold time t(MDH) 40 ns 14
MD setup time t(MDS) 40 ns 14
MS low-level time t(MSL) 16 MC clocks 14
MS high-level time t(MHH) 200 ns 14
MS hold time t(MSH) 40 ns 14
MS setup time t(MSS) 40 ns 14

CAD (KiCad official)

  • Symbol: PLL1708DBQR
  • Footprint: Package_SO:SSOP-20_3.9x8.7mm_P0.635mm
  • 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
  • 3D model files: pll1708dbqr-etched.step / pll1708dbqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pll1708dbqr.step / pll1708dbqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 c3c9acedead66728, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF