PJ9500M30SE

{
  "slug": "pj9500m30se",
  "version": "0.1.0",
  "type": "component",
  "description": "PJSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "pj9500m30se",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pj9500m30se.kicad_sym",
    "pj9500m30se.kicad_mod",
    "pj9500m30se.glb",
    "pj9500m30se.step",
    "pj9500m30se.lbr",
    "docs/hero.png",
    "docs/pj9500m30se-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pj9500m30se-hero.glb",
    "pj9500m30se-hero.overlay.json",
    "pj9500m30se-etched.glb"
  ],
  "component": {
    "mpn": "PJ9500M30SE",
    "manufacturer": "PJSEMI",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923862953975808",
    "parts": {
      "symbol": "pj9500m30se.kicad_sym",
      "footprint": "pj9500m30se.kicad_mod",
      "model_3d": "pj9500m30se-hero.glb",
      "model_3d_plain": "pj9500m30se-etched.glb",
      "model_3d_step": "pj9500m30se-etched.step",
      "model_3d_step_plain": "pj9500m30se.step",
      "lbr": "pj9500m30se.lbr"
    },
    "distributor_links": {
      "lcsc": "C20618183"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T07:03:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Power input; the datasheet gives a supply range of 1.8 V to 6 V, and a 1 µF ceramic input capacitor is recommended between VIN and GND placed close to the device."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin; a wide copper trace is required for both VIN and GND per the datasheet's PCB layout guidance."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Chip enable, active high: the regulator turns on when EN is above VIH (1.2 V min) and off when below VIL (0.9 V max); EN is internally pulled low to GND by a 1 MΩ resistor, and should be tied to VIN if the feature is not used."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; the datasheet lists this pin as not connected."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output voltage; the datasheet recommends a 1 µF to 10 µF output capacitor with ESR of 5 mΩ to 500 mΩ and X7R or X5R dielectric, and a maximum output current of 500 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: In the page 2 pin-distribution layout, the '5. VOUT 4. NC' text is printed next to the SOT-89-5 labe; Pin descriptions combine the page 2 pin functions with electrical limits from pages 6, 7, and 10 (su"
        ],
        "pages_sent": 16,
        "cost_usd": 0.038,
        "at": "2026-10-19T07:03:10"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923862953975808",
        "pages": 16,
        "sha256": "d7709c00ce45adff",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pj9500m30se.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pj9500m30se-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8ced47341a0be5700135a57cca66d514ae863e55839507072b99dbb540b24953",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}